Supported Platforms
timeslots
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Description
For E1 and T1interfaces, allocate the specific time slots by number.
 | Note: When configuring E1 or T1 interfaces on the 10-port Channelized E1/T1 IQE PIC, the timeslots statement must be included at the [edit interfaces e1-fpc/pic/port] or [edit interfaces t1-fpc/pic/port] hierarchy level as appropriate. |
Options
time-slot-range—Actual time slot numbers allocated:
Range: Ranges vary by interface type and configuration option as follows:
- 1 through 24 for T1 interfaces (0 is reserved)
- 1 through 31 for 4-port E1 PICs (0 is reserved)
- 1 through 31 for NxDS0 interfaces (0 is reserved)
- 2 through 32 for 10-port Channelized E1 and 10-port Channelized E1 IQ PICs (1 is reserved)
- 2 through 32 for the setting under e1-options with IQE PICs (1 is reserved) (when creating fractional E1)
- 1 through 31 for the setting under partition with IQE PICs (0 is reserved) (when creating NxDS0)
| Note: When creating fractional E1 interfaces only, if you connect a 4-port E1 PIC interface to a device that uses time slot numbering from 2 through 32, you must subtract 1 from the configured number of time slots. |
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
