BGP Operational Mode Commands
Table 1 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot the Border Gateway Protocol (BGP). Commands are listed in alphabetical order.
Table 1: BGP Operational Mode Commands
Task | Command |
|---|---|
Remove damping information. | |
Remove entries from the neighbor database. | |
Request BGP to refresh routes. | |
Display information about the BGP Monitoring Protocol. | |
Display entries in the BGP group database. | |
Display traffic statistics for BGP groups. | |
Display entries in the BGP neighbor database. | |
Display the BGP state replication status for nonstop active routing-enabled devices. | |
Display BGP summary information. | |
Display BGP damping parameters. |
 | Note: For more BGP-related commands, such as show route protocol, show route instance, and show route table, see Protocol-Independent Routing Operational Mode Commands. |
| Note: For information about how to configure BGP, see the Junos Routing Protocols Configuration Guide. |
