Navigation
Supported Platforms
Default IEEE 802.1ad Classifier
Table 1 shows the code point, forwarding class alias, and PLP that are assigned to the IEEE 802.1ad bits when you apply the explicit default IEEE 802.1ad classifier. The table is very similar to the IEEE 802.1p default table, but the loss priority is determined by the DEI bit. To apply the default table, include the default statement at the [edit class-of-service interfaces interface-name unit logical-unit-number classifiers ieee-802.1] hierarchy level:
[edit class-of-service interfaces interface-name unit logical-unit-number classifiers ieee-802.1ad]default;
Table 1: Default IEEE 802.1ad Classifier
IEEE 802.1ad Code Point | Forwarding Class Alias | PLP |
|---|---|---|
0000 | be | low |
0010 | be1 | low |
0100 | ef | low |
0110 | ef1 | low |
1000 | af11 | low |
1010 | af12 | low |
1100 | nc1 | low |
1110 | nc2 | low |
0001 | be-dei | high |
0011 | be1-dei | high |
0101 | ef-dei | high |
0111 | ef1-dei | high |
1001 | af11-dei | high |
1011 | af12-dei | high |
1101 | nc1-dei | high |
1111 | nc2-dei | high |
