Layer 2 Bridging and Switching Operational Mode Commands
Table 1 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot Layer 2 bridging and switching. Commands are listed in alphabetical order.
Table 1: Layer 2 Bridging and Switching Operational Mode Commands
Task | Command |
|---|---|
Clear learned Layer 2 address information from the media access control (MAC) address table. | |
Clear bridge protocol data unit (BPDU) error on interface due to possible bridge spanning tree protocol (STP) loop. | |
Clear a MAC rewrite error condition for Layer 2 protocol tunneling. | |
Display bridge domain information. | |
Display bridging flooding information. | |
Display learned Layer 2 MAC address information. | |
Display bridge statistics. | |
Display Layer 2 learning process-related information. | |
(MX Series routers only) Display the total number of dynamic and static MAC addresses learned for the entire router. | |
Display configured Layer 2 routing instances. | |
Display configured Layer 2 interfaces. | |
Display Layer 2 interfaces. |
