Supported Platforms
Related Documentation
- QFX Series standalone switches
- MPLS Feature Support on the QFX Series and EX4600 Switch Overview
- MPLS Configuration Guidelines
Supported MPLS Scaling Values
This topic lists the MPLS scaling values supported on QFX Series and on EX4600 switches.
Table 1 lists the MPLS scaling values supported on Juniper QFX and on EX4600 switches.
Table 1: MPLS Scaling Values
Feature | QFX3500 Scaling Value | QFX5100 and EX4600 Scaling Value |
|---|---|---|
Maximum number of MPLS labels in a packet’s label stack | 3 labels for Push operations 2 labels for Pop operations 1 label for Swap operations | 3 labels for Push operations 2 labels for Pop operations 1 label for Swap operations |
Maximum number of MPLS labels on provider switches | 4096 | 16386 |
Maximum number of tunnel (combination of routes and LSPs) initiations | Ingress LSPs: 1024 Transit LSPs: 4000 | Ingress LSPs: 1024 Transit LSPs: 16386 |
Maximum number of unique next-hops on egress provider edge (PE) switches | 512 | 512 |
Maximum number of MPLS firewall filters | 768 | 1536 |
Virtual Routing and Forwarding (VRF) | 1K | 1K |
Layer 3 Host | IPV4: 8K | |
Layer 3 Longest Prefix Match (LPM) | IPV4: 16K IPV6: 4K |
Related Documentation
- QFX Series standalone switches
- MPLS Feature Support on the QFX Series and EX4600 Switch Overview
- MPLS Configuration Guidelines
Published: 2014-07-23
Supported Platforms
Related Documentation
- QFX Series standalone switches
- MPLS Feature Support on the QFX Series and EX4600 Switch Overview
- MPLS Configuration Guidelines
