Navigation
Supported Platforms
Related Documentation
[edit interfaces ae] Configuration Statement Hierarchy on EX Series Switches
This topic lists supported and unsupported configuration statements in the [edit interfaces ae] hierarchy level on EX Series switches.
- Supported statements are those that you can use to configure some aspect of a software feature on the switch.
- Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them.
- Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, see EX Series Switch Software Features Overview.
This topic lists:
Supported Statements in the [edit interfaces ae] Hierarchy Level
The following hierarchy shows the [edit interfaces ae] configuration statements supported on EX Series switches.
interfaces {ae-fpc/pic/port {accounting-profile name;aggregated-ether-options {ethernet-switch-profile {tag-protocol-id identifier ;}(flow-control | no-flow-control);lacp {(active | passive);admin-key key;periodic interval;system-id mac-address;}(link-protection | no-link-protection);link-speed speed;(loopback | no-loopback);minimum-links number;}description text;disable;(gratuitous-arp-reply | no-gratuitous-arp-reply);mtu bytes;no-gratuitous-arp-request;traceoptions {flag flag;}(traps | no-traps);unit logical-unit-number {accounting-profile name;arp-resp; bandwidth rate;description text;disable;family ccc;family ethernet-switching {filter {input filter-name;output filter-name;}native-vlan-id vlan-id-number;port-mode (access | trunk);vlan {members [ members];}}family inet {address ipv4-address {arp ip-address (mac | multicast-mac) mac-address <publish>;broadcast address;preferred;primary;vrrp-group group-number {(accept-data | no-accept-data);advertise–interval seconds;authentication-key key;authentication-type authentication;fast-interval milliseconds;(preempt | no-preempt) {hold-time seconds;}priority number;track {interface interface-name {bandwidth-threshold bandwidth;priority-cost number;}priority-hold-time seconds;route ip-address/mask routing-instance instance-name priority-cost cost;}virtual-address [ addresses ];virtual-link-local-address address; vrrp-inherit-from {active-group group-number; active-interface interface-name;}}}dhcp {client-identifier (ascii client-id | hexadecimal client-id);lease-time (seconds | infinte);retransmission-attempt number;retransmission-interval sections;server-address ip-address;update-server server;vendor-id id; }filter {input filter-name;output filter-name;}mtu bytes;no-neighbor-learn; no-redirects;primary;rpf-check;targeted-broadcast;}family inet6 {address address {eui-64;ndp ip-address (mac | multicast-mac) mac-address <publish>;preferred;primary;vrrp-inet6-group group-id {accept-data | no-accept-data; authentication-key key;authentication-type authentication;fast-interval milliseconds;inet6-advertise-interval milliseconds;preempt | no-preempt {hold-time seconds;}priority number;track {interface interface-name {bandwidth-threshold bandwidth priority-cost number;priority-cost number;}priority-hold-time seconds;route ( address | routing-instance routing-instance-name );}virtual-inet6-address [addresses];virtual-link-local-address ipv6–address;}vrrp-inherit-from {active-group group-name;active-interface interface-name;}}(dad-disable | no-dad-disable); filter {input filter-name;output filter-name;}mtu bytes;no-neighbor-learn; policer {input policer-name;output policer-name;}rpf-check;}family iso {address interface-address;mtu bytes;}family mpls {mtu bytes;}proxy-arp (restricted | unrestricted);(traps | no-traps);vlan-id (VLAN Tagging and Layer 3 Subinterfaces) vlan-id-number;}vlan-tagging;}}
Unsupported Statements in the [edit interfaces ae] Hierarchy Level
All statements in the [edit interfaces ae] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented with the following exceptions:
Table 1: Unsupported [edit interfaces ae] Configuration Statements on EX Series Switches
Statement | Hierarchy |
|---|---|
Note: Variables, such as interface-range, are not shown in the statements or hierarchies. | |
family fibre-channel | [edit interfaces ae unit] |
source-address-filter | [edit interfaces ae aggregated-ether-options] |
source-address-filtering | no-source-address-filtering | [edit interfaces ae aggregated-ether-options] |
