Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

[edit interfaces lo] Configuration Statement Hierarchy on EX Series Switches

This topic lists supported and unsupported configuration statements in the [edit interfaces lo] hierarchy level on EX Series switches.

  • Supported statements are those that you can use to configure some aspect of a software feature on the switch.
  • Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them.
  • Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, see EX Series Switch Software Features Overview.

This topic lists:

Supported Statements in the [edit interfaces lo] Hierarchy Level

The following hierarchy shows the [edit interfaces lo] configuration statements supported on EX Series switches.

interfaces {lo0 {accounting-profile name;description text;disable;hold-time down milliseconds up milliseconds ;traceoptions {flag flag;}(traps | no-traps);unit logical-unit-number {accounting-profile name;arp-resp; bandwidth rate;description text;disable;family ccc;family inet {address ipv4-address {preferred;primary;vrrp-group group-number {(accept-data | no-accept-data);advertise–interval seconds;authentication-key key;authentication-type authentication;fast-interval milliseconds;(preempt | no-preempt) {hold-time seconds;}priority number;track {interface interface-name {bandwidth-threshold bandwidth;priority-cost number;}priority-hold-time seconds;route ip-address/mask routing-instance instance-name priority-cost cost;}virtual-address [ addresses ];virtual-link-local-address address; vrrp-inherit-from {active-group group-number; active-interface interface-name;}}}dhcp {client-identifier (ascii client-id | hexadecimal client-id);lease-time (seconds | infinte);retransmission-attempt number;retransmission-interval sections;server-address ip-address;update-servervendor-id}filter {input filter-name;output filter-name;}no-neighbor-learn; no-redirects;primary;}family inet6 {address address {preferred;primary;vrrp-inet6-group group-id {accept-data | no-accept-data; authentication-key key;authentication-type authentication;fast-interval milliseconds;inet6-advertise-interval milliseconds;preempt | no-preempt {hold-time seconds;}priority number;track {interface interface-name {bandwidth-threshold bandwidth priority-cost number;priority-cost number;}priority-hold-time seconds;route ( address | routing-instance routing-instance-name );}virtual-inet6-address [addresses];virtual-link-local-address ipv6–address;vrrp-inherit-from {active-group group-name;active-interface interface-name;}}(dad-disable | no-dad-disable); filter {group group-name;input filter-name;output filter-name;}no-neighbor-learn; policer {input policer-name;output policer-name;}}family iso {address interface-address;}family mpls; (traps | no-traps);}}}

Unsupported Statements in the [edit interfaces lo] Hierarchy Level

All statements in the [edit interfaces lo] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented with the following exceptions:

Table 1: Unsupported [edit interfaces lo] Configuration Statements for EX Series Switches

Statement

Hierarchy

layer2-policer

[edit interfaces lo unit]

any

[edit interfaces lo unit family]

tcc

[edit interfaces lo unit family]

policer

[edit interfaces lo unit family inet]

unnumbered-address

[edit interfaces lo unit family inet]

 

Related Documentation

 

Published: 2014-04-25

Previous Page Next Page