Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

[edit interfaces me] Configuration Statement Hierarchy on EX Series Switches

This topic lists supported and unsupported configuration statements in the [edit interfaces me] hierarchy level on EX Series switches.

  • Supported statements are those that you can use to configure some aspect of a software feature on the switch.
  • Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them.
  • Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, see EX Series Switch Software Features Overview.

This topic lists:

Supported Statements in the [edit interfaces me] Hierarchy Level

The following hierarchy shows the [edit interfaces me] configuration statements supported on EX Series switches.

interfaces {me0 {accounting-profile name;description text;disable;(gratuitous-arp-reply | no-gratuitous-arp-reply);hold-time up milliseconds down milliseconds;no-gratuitous-arp-request;traceoptions {flag flag;}(traps | no-traps);unit logical-unit-number {accounting-profile name;arp-resp; bandwidth rate; description text;disable;family ethernet-switching {filter {input filter-name;output filter-name;}native-vlan-id vlan-id-number;port-mode (access | trunk);vlan {members [ members];}}family inet {accounting {destination-class-usage;source-class-usage {input;output;}}address ipv4-address {arp ip-address (mac | multicast-mac) mac-address <publish>;broadcast address;master-only;preferred;primary;}dhcp {client-identifier (ascii client-id | hexadecimal client-id);lease-time (seconds | infinte);retransmission-attempt number;retransmission-interval sections;server-address ip-address;update-servervendor-id}filter {input filter-name;output filter-name;}mtu bytes;no-neighbor-learn; primary;rpf-check;}family inet6 {accounting {destination-class-usage;source-class-usage {input;output;}}address address {eui-64;ndp ip-address (mac | multicast-mac) mac-address <publish>;preferred;primary;}(dad-disable | no-dad-disable); filter {group group-name;input filter-name;output filter-name;}mtu bytes;no-neighbor-learn; policer {input policer-name;output policer-name;}rpf-check;}family iso {address interface-address;mtu bytes;}family mpls {mtu bytes;}swap-by-poppush;(traps | no-traps);vlan-id vlan-id-number;}vlan-tagging;}}

Unsupported Statements in the [edit interfaces me] Hierarchy Level

All statements in the [edit interfaces me] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented with the following exceptions:

Table 1: Unsupported [edit interfaces me] Configuration Statements for EX Series Switches

Statement

Hierarchy

encapsulation

[edit interfaces me]

link-mode

[edit interfaces me]

encapsulation

[edit interfaces me unit]

layer2-policer

[edit interfaces me unit]

native-inner-vlan-id

[edit interfaces me unit]

vlan-id-list

[edit interfaces me unit]

vlan-id-range

[edit interfaces me unit]

ccc

[edit interfaces me unit family]

tcc

[edit interfaces me unit family]

vpls

[edit interfaces me unit family]

no-redirects

[edit interfaces me unit family inet]

policer

[edit interfaces me unit family inet]

sampling

[edit interfaces me unit family inet]

service

[edit interfaces me unit family inet]

unnumbered-address

[edit interfaces me unit family inet]

vrrp-group

[edit interfaces me unit family inet address]

service

[edit interfaces me unit family inet6]

vrrp-inet6-group

[edit interfaces me unit family inet6 address]

 

Related Documentation

 

Published: 2014-04-25

Previous Page Next Page