Navigation
Supported Platforms
Related Documentation
[edit interfaces xe] Configuration Statement Hierarchy on EX Series Switches
This topic lists supported and unsupported configuration statements in the [edit interfaces xe] hierarchy level on EX Series switches.
- Supported statements are those that you can use to configure some aspect of a software feature on the switch.
- Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them.
- Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, seeEX Series Switch Software Features Overview
This topic lists:
Supported Statements in the [edit interfaces xe] Hierarchy Level
The following hierarchy shows the [edit interfaces xe] configuration statements supported on EX Series switches.
interfaces {xe-fpc/pic/port {accounting-profile name;clocking (external | internal);description text;disable;ether-options {802.3ad {aex;(backup | primary);lacp {force-up;}}(flow-control | no-flow-control);(loopback | no-loopback);}framing (lan-phy | wan-phy); (gratuitous-arp-reply | no-gratuitous-arp-reply);hold-time up milliseconds down milliseconds;mtu bytes;no-gratuitous-arp-request;optics-options {alarm alarm-type;warning alarm-type;wavelength nanometers;}traceoptions {flag flag;}(traps | no-traps);unit logical-unit-number {accounting-profile name;bandwidth rate; description text;disable;family ccc;family ethernet-switching {filter {input filter-name;output filter-name;}native-vlan-id vlan-id-number;port-mode (access | trunk);vlan {members [ members];}}family inet {accounting {destination-class-usage;source-class-usage {input;output;}}address ipv4-address {arp ip-address (mac | multicast-mac) mac-address <publish>;broadcast address;preferred;primary;vrrp-group group-number {(accept-data | no-accept-data);advertise–interval seconds;authentication-key key;authentication-type authentication;fast-interval milliseconds;(preempt | no-preempt) {hold-time seconds;}priority number;track {interface interface-name {bandwidth-threshold bandwidth;priority-cost number;}priority-hold-time seconds;route ip-address/mask routing-instance instance-name priority-cost cost;}virtual-address [ addresses ];virtual-link-local-address address; vrrp-inherit-from {active-group group-number; active-interface interface-name;}}}dhcp {client-identifier (ascii client-id | hexadecimal client-id);lease-time (seconds | infinte);retransmission-attempt number;retransmission-interval sections;server-address ip-address;update-servervendor-id}filter {input filter-name;output filter-name;}mtu bytes;no-neighbor-learn; no-redirects;primary;rpf-check;targeted-broadcast;}family inet6 {accounting {destination-class-usage;source-class-usage {input;output;}}address address {eui-64;ndp ip-address (mac | multicast-mac) mac-address <publish>;preferred;primary;vrrp-inet6-group group-id {accept-data | no-accept-data; authentication-key key;authentication-type authentication;fast-interval milliseconds;inet6-advertise-interval milliseconds;preempt | no-preempt {hold-time seconds;}priority number;track {interface interface-name {bandwidth-threshold bandwidth priority-cost number;priority-cost number;}priority-hold-time seconds;route ( address | routing-instance routing-instance-name );}virtual-inet6-address [addresses];virtual-link-local-address ipv6–address;vrrp-inherit-from {active-group group-name;active-interface interface-name;}}}(dad-disable | no-dad-disable); filter {group group-name;input filter-name;output filter-name;}mtu bytes;no-neighbor-learn; policer {input policer-name;output policer-name;}rpf-check;}family iso {address interface-address;mtu bytes;}family mpls {mtu bytes;}proxy-arp (restricted | unrestricted);swap-by-poppush;(traps | no-traps);vlan-id (VLAN Tagging and Layer 3 Subinterfaces) vlan-id-number;}vlan-tagging;}}
Unsupported Statements in the [edit interfaces xe] Hierarchy Level
All statements in the [edit interfaces xe] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented.
