Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

[edit protocols ospf] Configuration Statement Hierarchy on EX Series Switches

This topic lists supported and unsupported configuration statements in the [edit protocols ospf] hierarchy level on EX Series switches.

  • Supported statements are those that you can use to configure some aspect of a software feature on the switch.
  • Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them.
  • Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, see EX Series Switch Software Features Overview.

This topic lists:

Supported Statements in the [edit protocols ospf] Hierarchy Level

The following hierarchy shows the [edit protocols ospf] configuration statements supported on EX Series switches:

protocols {ospf {area area-id {area-range ip-prefix</prefix-length> <exact> <override-metric metric> <restrict>;context-identifierinterface interface-name {authentication {md5 key-id key key-string <start-time YYYY-MM-DD.hh:mm>;simple-password key-string;}bandwidth-based-metrics {bandwidth value metric number;}bfd-liveness-detection {authentication {algorithm (keyed-md5 | keyed-sha-1 | meticulous-keyed-md5 | meticulous-keyed-sha-1 | simple-password);loose-check;}detection-time {threshold milliseconds;}full-neighbors-only;minimum-interval milliseconds;minimum-receive-interval milliseconds;multiplier number;no-adaptation;transmit-interval {minimum-interval milliseconds;threshold milliseconds;}version (0|1 | automatic);}dead-interval seconds;disable;dynamic-neighbors;flood-reduction;hello-interval seconds;interface-type (nbma | p2mp | p2p);ipsec-sa sa-name;(link-protection | node-link-protection);metric metric;no-eligible-backup;no-interface-state-traps;no-neighbor-down-notification;passive {traffic-engineering {remote-node-id address;}}poll-interval seconds;priority number;retransmit-interval seconds;secondary;te-metric metric;transit-delay seconds;}network-summary-export [ policy-names ];network-summary-import [ policy-names ];no-context-identifier-advertisement;nssa {area-range ip-prefix</prefix-length> <exact> <override-metric metric> <restrict>;default-lsa {default-metric metric;metric-type type;type-7;}(summaries | no-summaries);}stub <default-metric metric> <summaries | no-summaries>;virtual-link neighbor-id router-id transit-area area-id;}backup-spf-options disable;downstream-paths-only;no-install;}database-protection {ignore-count number;ignore-time seconds;maximum-lsa number;reset-time seconds;warning-only;warning-threshold percent;}disable;export [ policy-names ];external-preference preference;graceful-restart {disable;helper-disable <both | restart-signaling | standard>;no-strict-lsa-checking;notify-duration seconds;restart-duration seconds;}import [ policy-names ];no-nssa-abr;no-rfc-1583;overload <timeout seconds>;preference preference;prefix-export-limit number;reference-bandwidth reference-bandwidth;rib-group group-name;spf-options {delay milliseconds;holddown milliseconds;no-ignore-our-externals;rapid-runs number;}topology {disable;rib-group group-name;topology-id number;}traceoptions {file filename <files number> <size maximum-file-size> <world-readable | no-world-readable>;flag flag <flag-modifier> <disable>;}traffic-engineering {advertise-unnumbered-interfaces;credibiliity-protocol-preference;ignore-lsp-metrics;multicast-rpf-routes;no-topology;shortcuts <lsp-metric-into-summary>;}}}

Unsupported Statements in the [edit protocols ospf] Hierarchy Level

All statements in the [edit protocols ospf] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented with the following exceptions:

Table 1: Unsupported [edit protocols ospf] Configuration Statements on EX Series Switches

Statement

Hierarchy

Note: Variables, such as interface-name, are not shown in the statements or hierarchies.

backup-spf-options

[edit protocols ospf topology]

key-chain

[edit protocols ospf area interface bfd-liveness-detection authentication]

overload

[edit protocols ospf topology]

prefix-export-limit

[edit protocols ospf topology]

spf-options

[edit protocols ospf topology]

topology

[edit protocols ospf area interface]

 

Related Documentation

 

Published: 2014-04-23

Supported Platforms

 

Related Documentation

 

Published: 2014-04-23

Previous Page Next Page