TechLibrary

Navigation

Supported Platforms

EX Series

[edit switch-options] Configuration Statement Hierarchy on EX Series Switches

This topic lists supported and unsupported configuration statements in the [edit switch-options] hierarchy level on EX Series switches.

Supported statements are those that you can use to configure some aspect of a software feature on the switch.
Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them.
Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, see EX Series Switch Software Features Overview.

This topic lists:

Supported Statements in the [edit switch-options] Hierarchy Level

The following hierarchy shows the [edit switch-options] configuration statements supported on EX Series switches:

switch-options {authentication-whitelist mac-address {interface interface-name;vlan-assignment (vlan-id | vlan-name);}interface interface-name {interface-mac-limit number {packet-action action;}no-mac-learning;persistent-learning}no-mac-learning; redundant-trunk-group {group name {description text;interface interface-name {primary;}preempt-cutover-timer seconds}} unknown-unicast-forwarding { vlan (all | vlan-name | vlan-tag) { interface interface-name;}} voip { interface (all | [interface-name | access-ports]) { forwarding-class (assured-forwarding | best-effort | expedited-forwarding | mcast-af | mcast-be | mcast-ef | mcast-nc | network-control); vlan vlan-name;}}}

Unsupported Statements in the [edit switch-options] Hierarchy Level

All statements in the [edit switch-options] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented with the following exceptions:

Table 1: Unsupported [edit switch-options] Configuration Statements on EX Series Switches

Statement	Hierarchy Level
Note: Variables, such as filename, are not shown in the statements or hierarchies.
port-error-disable	[edit switch-options]
disable-timeout	[edit switch-options port-error-disable]

Published: 2014-04-24

Supported Platforms

EX Series