Rate and give feedback:  Feedback Received. Thank You!

Rate and give feedback: 

X

This document helped resolve my issue

Yes No

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:  

E-mail: 

Enter a valid Email ID

Need product assistance? Contact Juniper Support

Submit

This site is protected by hCaptcha and its Privacy Policy and Terms of Service apply.

English  

English

Managing Configuration Files Through the Configuration History (J-Web Procedure)

1. Displaying Configuration History
2. Displaying Users Editing the Configuration
3. Comparing Configuration Files with the J-Web Interface
4. Downloading a Configuration File with the J-Web Interface
5. Loading a Previous Configuration File with the J-Web Interface

Displaying Configuration History

To manage configuration files with the J-Web interface, select Maintain > Config Management > History. The main pane displays History — Database Information page.

Table 1 summarizes the contents of the display.

The configuration history display allows you to:

• View a configuration.
• Compare two configurations.
• Download a configuration file to your local system.
• Roll back the configuration to any of the previous versions stored on the switch.

Displaying Users Editing the Configuration

To display a list of users editing the switching platform configuration, select Config Management > History. The list is displayed as Database Information in the main pane. Table 2 summarizes the Database Information display.

Comparing Configuration Files with the J-Web Interface

To compare any two of the past 50 committed configuration files:

1. Select Config Management > History. A list of the current and the previous 49 configurations is displayed as Configuration History in the main pane.
2. Select the check boxes to the left of the two configuration versions you want to compare.
3. Click Compare.

   The main pane displays the differences between the two configuration files at each hierarchy level as follows:

   • Lines that have changed are highlighted side by side in green.
   • Lines that exist only in the more recent configuration file are displayed in red on the left.
   • Lines that exist only in the older configuration file are displayed in blue on the right.

Downloading a Configuration File with the J-Web Interface

To download a configuration file from the switch to your local system:

1. Select Config Management > History. A list of current and previous 49 configurations is displayed as Configuration History in the main pane.
2. In the Action column, click Download for the version of the configuration you want to download.
3. Select the options your Web browser provides that allow you to save the configuration file to a target directory on your local system.

   The file is saved as an ASCII file.

Loading a Previous Configuration File with the J-Web Interface

To load (roll back) and commit a previous configuration file stored on the switching platform:

1. Select Config Management > History. A list of current and previous 49 configurations is displayed as Configuration History in the main pane.
2. In the Action column, click Rollback for the version of the configuration you want to load.

   The main pane displays the results of the rollback operation.

   Note: When you click Rollback, the switch loads and commits the selected configuration. This behavior is different from the switch's behavior that occurs after you enter the rollback configuration mode command from the CLI. In the latter case, the configuration is loaded but not committed.