Navigation
Configuring SONET/SDH Framing Mode
To configure framing on a per-port basis:
- In configuration mode, go to the [edit interfaces] hierarchy level.[edit]user@host# edit interfaces
- Configure the SONET/SDH interface.[edit interfaces]user@host# edit so-fpc/pic/port
- Configure the framing option in SDH mode or in SONET mode.[edit interfaces so-fpc/pic/port]user@host# set framing (sdh | sonet)
 | Note: For a channelized MIC, replace so with coc3/cstm1 when configuring the framing option as sonet. Similarly, replace so with coc12/cstm4 when configuring the framing option as sdh. |
To view interface information, use the show interfaces so-fpc/pic/port operational mode command.
