Navigation
Related Documentation
Configuring an Incrementing STM ID
To configure an incrementing STM ID explicitly.
- In configuration mode, go to the [edit interfaces interface-name sonet-options] hierarchy level, where
the interface-name is so-fpc/pic/port.[edit]user@host# edit interfaces so-fpc/pic/port sonet-options
- Configure an incrementing STM ID rather than a static
one in the SDH overhead with the z0-increment. Note that
you should include this option only for SDH mode. [edit interfaces so-fpc/pic/port sonet-options]user@host# set z0-increment
- Configure the no-z0-increment option explicitly
to disable incrementing of the STM ID.[edit interfaces so-fpc/pic/port sonet-options]user@host# set no-z0-increment
To explicitly disable incrementing of the STM ID.
- In configuration mode, go to the [edit interfaces interface-name sonet-options] hierarchy level, where
the interface-name is so-fpc/pic/port.[edit]user@host# edit interfaces so-fpc/pic/port sonet-options
- Configure the no-z0-increment option explicitly
to disable incrementing of the STM ID.[edit interfaces so-fpc/pic/port sonet-options]user@host# set no-z0-increment
