Related Documentation
Enabling Tunnel and Global Counters for SNMP Statistics Collection
By default, SNMP polling is disabled for L2TP statistics. As a consequence, the L2TP tunnel and global counters listed in Table 1 have a default value of zero.
Table 1: SNMP Counters for L2TP Statistics
Counter Name | Type |
|---|---|
jnxL2tpTunnelStatsDataTxPkts | Tunnel |
jnxL2tpTunnelStatsDataRxPkts | Tunnel |
jnxL2tpTunnelStatsDataTxBytes | tunnel |
jnxL2tpTunnelStatsDataRxBytes | Tunnel |
jnxL2tpStatsPayloadRxOctets | Global |
jnxL2tpStatsPayloadRxPkts | Global |
jnxL2tpStatsPayloadTxOctets | Global |
jnxL2tpStatsPayloadTxPkts | Global |
You can enable collection of these statistics by including the enable-snmp-tunnel-statistics statement at the [edit services l2tp] hierarchy level. When enabled, the L2TP process polls for these statistics every 30 seconds for 1000 sessions. The potential age of the statistics increases with the number of subscriber sessions; the data is refreshed more quickly as the number of sessions decreases. For example, with 60,000 sessions, none of these statistics can be more than 30 minutes old.
 | Best Practice: The system load can increase when you enable these counters and also use RADIUS interim accounting updates. We recommend you enable these counters when you are using only SNMP statistics. |
To enable L2TP statistics collection for SNMP:
- Enable statistics collection.[edit services l2tp]user@host1# set enable-snmp-tunnel-statistics
