Routing
To view information about routes in a routing table or for information about OSPF, BGP, RIP, or data link switching (DLSw), select Monitor>Routing in the J-Web interface.
The routing information includes information about the route's destination, protocol, state, and parameters. To view selective information, type or select information in one or more of the Narrow Search boxes, and click Search.
Table 1 shows a summary of the information displayed on the Routing pages and the corresponding CLI show commands that you can enter at the J-Web CLI terminal.
Table 1: Routing Information and the Corresponding CLI show Commands
Information Displayed | Corresponding CLI Command |
|---|---|
| Route Information | |
A high-level summary of the routes in the routing table. | show route terse |
Detailed information about the active entries in the routing tables. | show route detail |
| BGP Information | |
Summary about Border Gateway Protocol (BGP). | show bgp summary |
BGP peers. | show bgp neighbor |
| OSPF Information | |
Information about OSPF neighbors. | show ospf neighbors |
OSPF interfaces. | show ospf interfaces |
OSPF statistics. | show ospf statistics |
| RIP Information | |
Routing Information Protocol (RIP) statistics about messages sent and received on an interface, as well as information received from advertisements from other routers. | show rip statistics |
RIP neighbors. | show rip neighbors |
| DLSw Information | |
Data link switching (DLSw) capabilities of a specific remote peer or all peers. | show dlsw capabilities |
Configured DLSw circuits. | show dlsw circuits |
DLSw peer status. | show dlsw peers |
Media access control (MAC) and IP addresses of remote DLSw peers. | show dlsw reachability |
