Navigation
Supported Platforms
Related Documentation
- ACX, EX, M, MX, SRX, T Series
- action-profile
- ACX, EX, M, MX, T Series
- IEEE 802.3ah OAM Link-Fault Management Overview
- Configuring IEEE 802.3ah OAM Link-Fault Management
- Enabling IEEE 802.3ah OAM Support
- Configuring Link Discovery
- Configuring the OAM PDU Interval
- Configuring the OAM PDU Threshold
- Configuring Threshold Values for Local Fault Events on an Interface
- Disabling the Sending of Link Event TLVs
- Detecting Remote Faults
- Specifying the Actions to Be Taken for Link-Fault Management Events
- Monitoring the Loss of Link Adjacency
- Monitoring Protocol Status
- Configuring Threshold Values for Fault Events in an Action Profile
- Applying an Action Profile
- Setting a Remote Interface into Loopback Mode
- Example: Configuring IEEE 802.3ah OAM Support on an Interface
- ACX, EX, MX, T Series
- Enabling Remote Loopback Support on the Local Interface
- Additional Information
- Ethernet Interfaces
Configuring an OAM Action Profile
You can create an action profile to define event fault flags and thresholds and the action to be taken. You can then apply the action profile to one or more interfaces.
To configure an action profile, include the action-profile statement at the [edit protocols oam ethernet link-fault-management] hierarchy level:
action-profile profile-name {action {syslog;link-down;send-critical-event;}event {link-adjacency-loss;link-event-rate {frame-error count;frame-period count;frame-period-summary count;symbol-period count;}protocol-down;}}
Related Documentation
- ACX, EX, M, MX, SRX, T Series
- action-profile
- ACX, EX, M, MX, T Series
- IEEE 802.3ah OAM Link-Fault Management Overview
- Configuring IEEE 802.3ah OAM Link-Fault Management
- Enabling IEEE 802.3ah OAM Support
- Configuring Link Discovery
- Configuring the OAM PDU Interval
- Configuring the OAM PDU Threshold
- Configuring Threshold Values for Local Fault Events on an Interface
- Disabling the Sending of Link Event TLVs
- Detecting Remote Faults
- Specifying the Actions to Be Taken for Link-Fault Management Events
- Monitoring the Loss of Link Adjacency
- Monitoring Protocol Status
- Configuring Threshold Values for Fault Events in an Action Profile
- Applying an Action Profile
- Setting a Remote Interface into Loopback Mode
- Example: Configuring IEEE 802.3ah OAM Support on an Interface
- ACX, EX, MX, T Series
- Enabling Remote Loopback Support on the Local Interface
- Additional Information
- Ethernet Interfaces
Published: 2013-08-28
Supported Platforms
Related Documentation
- ACX, EX, M, MX, SRX, T Series
- action-profile
- ACX, EX, M, MX, T Series
- IEEE 802.3ah OAM Link-Fault Management Overview
- Configuring IEEE 802.3ah OAM Link-Fault Management
- Enabling IEEE 802.3ah OAM Support
- Configuring Link Discovery
- Configuring the OAM PDU Interval
- Configuring the OAM PDU Threshold
- Configuring Threshold Values for Local Fault Events on an Interface
- Disabling the Sending of Link Event TLVs
- Detecting Remote Faults
- Specifying the Actions to Be Taken for Link-Fault Management Events
- Monitoring the Loss of Link Adjacency
- Monitoring Protocol Status
- Configuring Threshold Values for Fault Events in an Action Profile
- Applying an Action Profile
- Setting a Remote Interface into Loopback Mode
- Example: Configuring IEEE 802.3ah OAM Support on an Interface
- ACX, EX, MX, T Series
- Enabling Remote Loopback Support on the Local Interface
- Additional Information
- Ethernet Interfaces
