Navigation
Configuring Fractional T1 IQ Interfaces
By default, all the time slots on a channelized T1 interface are used. To configure a fractional T1 interface on a Channelized OC3 IQ or IQE PIC, you must perform the following tasks:
- Configure a T1 interface on the Channelized OC3 IQ or IQE PIC. For more information, see Configuring T1 and NxDS0 Interfaces.
- Configure the number of time slots allocated to the T1
IQ interface by including the timeslots statement at the [edit interfaces t1-fpc/pic/port<:channel> t1-options] hierarchy level: [edit interfaces t1-fpc/pic/port<:channel> t1-options]timeslots time-slot-range;
For channelized T1 IQ interfaces, the time-slot range is from 1 through 24. You can designate any combination of time slots. To configure ranges, use hyphens. To configure discontinuous time slots, use commas. Do not include spaces. For more information, see Configuring Fractional T1 Time Slots.
Example: Configuring Fractional T1 IQ Interfaces
Configure a fractional T1 interface that uses time slots 1 through 5 and 10:
[edit interfaces coc3-0/0/0]partition 1 oc-slice 1 interface-type coc1;[edit interfaces coc1-0/0/0:1]partition 1 interface-type t1;[edit interfaces t1-0/0/0:1:1 t1-options]timeslots 1-5,10;
For a full configuration example, see the Junos OS Feature Guides.
