- Download PDFs
-
lacp
- Related Topics
- JUNOS Software Network Interfaces Configuration Guide at https://www.juniper.net/techpubs/software/junos/junos90/index.html
- Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between a Virtual Chassis Access Switch and a Virtual Chassis Distribution Switch
- Configuring Aggregated Ethernet LACP (CLI Procedure)
- Configuring Link Aggregation (J-Web Procedure)
- Understanding Aggregated Ethernet Interfaces and LACP
lacp
Syntax
- lacp mode {
-
periodic
interval;
- }
Hierarchy Level
- [edit interfaces ae-chassis/slot/port
aggregated-ether-options]
Release Information
Statement introduced in JUNOS Release 9.0 for EX-series switches.
Description
Configure the Link Aggregation Control Protocol (LACP).
Default
LACP is not enabled.
Options
-
mode —LACP mode:
- active—Initiate transmission of LACP packets
- passive—Respond to LACP packets
-
The remaining statement is explained separately.
Required Privilege Level
interface—To view this statement in the
configuration.
interface-control—To add this
statement to the configuration.