 |
Note: For the complete [edit interfaces] hierarchy, see the JUNOS Network Interfaces Configuration Guide. This listing includes only the statements used in configuring services. |
To configure services interfaces, include the following statements at the [edit interfaces] hierarchy level of the configuration. The statements can also be configured at the [edit logical-systems logical-system-name interfaces] hierarchy level.
|
Note: For the complete [edit interfaces] hierarchy, see the JUNOS Network Interfaces Configuration Guide. This listing includes only the statements used in configuring services. |
- [edit interfaces]
- interface-name {
-
- (atm-options | fastether-options | gigether-options | sonet-options)
{
-
- mpls {
-
- pop-all-labels {
- required-depth number;
- }
- }
- }
- encapsulation type;
-
- lsq-failure-options {
- no-termination-request;
- trigger-link-failure interface-name;
- }
-
- mlfr-uni-nni-bundle-options {
- acknowledge-retries number;
- acknowledge-timer milliseconds;
- action-red-differential-delay (disable-tx | remove-link);
- drop-timeout milliseconds;
- fragment-threshold bytes;
- cisco-interoperability send-lip-remove-link-for-link-reject;
- hello-timer milliseconds;
- lmi-type (ansi | itu);
- minimum-links number;
- mrru bytes;
- n391 number;
- n392 number;
- n393 number;
- red-differential-delay milliseconds;
- t391 number;
- t392 number;
- yellow-differential-delay milliseconds;
- encapsulation type;
- }
- passive-monitor-mode;
-
- unit logical-unit-number {
- clear-dont-fragment-bit;
-
- compression {
-
- rtp {
- f-max-period number;
- maximum-contexts number <force>;
-
- port {
- minimum port-number;
- maximum port-number;
- }
- queues [ queue-numbers ];
- }
- }
- compression-device interface-name;
- copy-tos-to-outer-ip-header;
- disable-mlppp-inner-ppp-pfc;
- dlci dlci-identifier;
- drop-timeout milliseconds;
-
- dial-options {
- ipsec-interface-id name;
- l2tp-interface-id name;
- (dedicated | shared);
- }
-
- dynamic-call-admission-control {
- activation-priority priority;
- bearer-bandwidth-limit kilobits-per-second;
- }
- encapsulation type;
-
- family family {
-
- accounting {
- destination-class-usage;
- source-class-usage direction;
- }
-
- address address {
- destination address;
- }
- bundle (ml-fpc/pic/port | ls-fpc/pic/port);
- ipsec-sa ipsec-sa;
- multicast-only;
- receive-options-packets;
- receive-ttl-exceeded;
- sampling direction;
-
- service {
-
- input {
- service-set service-set-name <service-filter filter-name>;
- post-service-filter filter-name;
- }
-
- output {
- service-set service-set-names <service-filter filter-name>;
- }
- }
- }
- fragment-threshold bytes;
- interleave-fragments;
- minimum-links number;
- mrru bytes;
- multicast-dlci dlci-identifier;
- peer-unit unit-number;
- reassemble-packets;
- rpm client;
- service-domain (inside | outside);
- short-sequence;
-
- tunnel {
- allow-fragmentation;
- backup-destination address;
- destination destination-address;
- do-not-fragment;
- key number;
-
- routing-instance {
- destination routing-instance-name;
- }
- source-address address;
- ttl number;
- }
- twamp-server;
- }
-
- multiservice-options {
- (core-dump | no-core-dump);
- (syslog | no-syslog);
- }
-
- services-options {
- inactivity-timeout seconds;
- open-timeout seconds;
-
- syslog {
-
- host hostname {
- services severity-level;
- facility-override facility-name;
- log-prefix prefix-value;
- }
- }
- }
- }
- rlsqnumber {
-
- redundancy-options {
- hot-standby | warm-standby;
- primary lsq-fpc/pic/port;
- secondary lsq-fpc/pic/port;
- }
- }
- rspnumber {
-
- redundancy-options {
- primary sp-fpc/pic/port;
- secondary sp-fpc/pic/port;
- }
- }
- so-fpc/pic/port {
-
- unit logical-unit-number {
- passive-monitor-mode;
- }
- }