See the following sections:
- [edit services services pgcp gateway gateway-name h248-properties traffic-management]
Statement introduced in JUNOS Release 9.2.
maximum and minimum options introduced in JUNOS Release 9.5.
Configure the peak data rate for gate streams of any protocol.
The BGF uses the default value of 10,000 bytes per second if the Policy command in H.248 messages is ON and both of the following apply:
default bytes-per-second—Default peak data rate.
maximum bytes-per-second—Maximum peak data rate.
minimum bytes-per-second—Minimum peak data rate.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
JUNOS Multiplay Solutions Guide
- [edit services services pgcp gateway gateway-name h248-properties traffic-management]
Statement introduced in JUNOS Release 9.2.
Configure the peak data rate for RTP/RTCP gate streams. You can configure this rate as a fixed value or as a percentage of the RTP gate’s rate.
The PG uses the default value of 5 percent of the RTP gate's rate if the Policy command in H.248 messages in ON and both of the following apply:
fixed-value —Value entered is a fixed number of bits per second.
bytes-per-second—Peak data rate.
percentage bytes-per-second—Value entered is a percentage of the RTP’s gate rate..
percentage—Value entered is a percentage of the RTP’s gate rate..
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
JUNOS Multiplay Solutions Guide