Symbols
- #, comments in configuration statements 1
- ( ), in syntax descriptions 1
- < >, in syntax descriptions 1
- [ ], in configuration statements 1
- { }, in configuration statements 1
- | (pipe), in syntax descriptions 1
A
- across-the-network applications 1
- action statement 1
- usage guidelines 1
- address statement 1
- usage guidelines 1
- aggregated Ethernet interfaces
- CoS and 1
- example configuration 1
- aggregated interfaces
- scheduler modes 1
- aggregated SONET/SDH interfaces
- CoS and 1
- example configuration 1
- aliases, forwarding-class 1
- application-profile statement 1
- usage guidelines 1
- application-sets statement
- CoS 1
- usage guidelines 1
- applications statement
- CoS 1
- usage guidelines 1
- AS PIC
- CoS 1
- atm-options statement 1
- usage guidelines 1
- atm-scheduler-map statement 1
- usage guidelines 1
- ATM2 IQ interfaces
- CoS and 1
- copying the PLP to the CLP bit 1
- egress queues 1
- example configuration 1, 2
- linear RED profiles 1
- scheduler maps 1
- scheduling on the logical interface 1
- scheduling priority 1
- eight forwarding classes 1
- example configuration 1
B
- BA classification
- VPLS over ATM 1
- BA classifiers
- bridging 1
- inner VLAN tag 1
- bandwidth
- and delay buffer allocation 1
- guaranteed 1, 2, 3
- oversubscribing 1
- sharing excess 1
- bandwidth sharing
- for queue-level interfaces 1
- nonqueuing interfaces examples 1
- nonqueuing interfaces overview 1
- nonqueuing interfaces rate limits 1
- braces, in configuration statements 1
- brackets
- angle, in syntax descriptions 1
- square, in configuration statements 1
- bridging
- BA classifiers 1
- buffer size 1
- for slower interfaces 1
- example configuration 1
- buffer-size statement 1
- usage guidelines 1
C
- cbr statement 1
- usage guidelines 1
- channelized IQ interfaces
- CoS 1
- per-unit scheduling 1
- CIR 1
- configuring with PIR 1
- class statement 1
- usage guidelines 1, 2
- class-of-service statement 1
- usage guidelines 1
- classification
- AS PIC 1
- behavior aggregate 1
- applying DSCP IPv6 to an interface 1
- applying MPLS EXP to routing instances 1
- applying to an interface 1
- default forwarding classes and loss priorities 1
- defining custom 1
- example configuration 1, 2
- global classifiers 1
- overriding the default PLP 1
- types of BA classifiers 1
- wildcard routing instances 1
- by egress interface 1
- fixed 1
- for IEEE 802.1ad traffic 1
- multifield
- destination address 1
- example configuration 1, 2, 3, 4
- Layer 3 VPN 1
- VoIP 1
- VRF 1
- classification-override statement 1
- usage guidelines 1
- classifiers
- default for VPLS 1
- classifiers statement 1
- usage guidelines 1, 2
- code-point aliases 1
- code-point statement 1
- usage guidelines 1
- code-point-aliases statement 1
- usage guidelines 1
- code-points statement 1
- usage guidelines 1
- color-aware
- single-rate 1
- two-rate 1
- color-blind
- single-rate 1
- two-rate 1
- comments, in configuration statements 1
- configuration statements
- CoS 1
- conventions
- text and syntax 1
- copy-tos-to-outer-ip-header statement 1
- usage guidelines 1
- CoS
- action statements 1
- additional examples 1
- aggregated Ethernet interfaces 1
- example configuration 1
- aggregated SONET/SDH interfaces 1
- example configuration 1
- applications 1
- applications of 1
- applying traffic control profile examples 1
- AS PIC 1
- ATM and VPLS 1
- ATM2 IQ interfaces 1
- egress queues 1
- example configuration 1
- linear RED profiles 1
- scheduler maps 1
- scheduling on the logical interface 1
- scheduling priority 1
- buffer size 1
- channelized IQ interfaces 1
- CIR mode 1
- default scheduler 1
- drop profile 1, 2, 3
- drop profile examples 1
- eight forwarding classes 1
- example configuration 1
- Enhanced IQ interfaces 1, 2, 3, 4
- Enhanced Queuing DPC hardware 1
- EQ DPC interfaces 1
- example configuration 1
- for aggregated interfaces 1
- caveats 1
- example configuration 1
- for IEEE 802.1ad 1
- for IPsec tunnels 1
- for IQ2 PICs hierarchical schedulers 1
- for MPLS 1
- for MultiServices PIC tunnels 1
- for tunnels 1
- GRE ToS bits 1
- forwarding, next-hop selection 1
- defining and applying the policy 1
- example configuration 1, 2
- for IPv6 1
- forwarding-class aliases 1
- Gigabit Ethernet IQ interfaces 1
- hierarchical scheduler interface set 1, 2, 3
- hierarchical scheduler introduction 1
- hierarchical scheduler terms 1
- hierarchy examples 1
- ingress CoS on Enhanced Queuing DPC 1
- interface examples 1
- interface set examples 1
- interfaces
- sample configuration 1
- internal scheduler nodes 1
- IQ2 interfaces 1
- IQ2 PICs 1
- IQ2E interfaces 1
- IQ2E PICs 1
- IQE default rates 1
- IQE excess bandwidth 1
- IQE interfaces 1, 2
- IQE modes 1
- IQE terminology 1
- IQE traffic 1, 2
- low latency static policer 1
- M7i and M10i routers 1
- match conditions 1
- MDRR on Enhanced Queuing DPC 1
- MultiServices PIC 1
- on Enhanced Queuing DPC 1
- output shaping
- for DLCI or VLAN interface 1
- for physical interface 1
- overriding input classification 1
- PIR-only mode 1
- priority propagation 1
- protocol queue assignments
- changing 1
- defaults 1
- rate limit 1, 2
- RED 1
- rewrite rules 1
- applying a default 1
- applying to VLAN tags 1, 2, 3, 4
- assigning to interface 1
- defining custom 1
- EXP bits, by node 1, 2
- EXP bits, rewriting three labels 1
- IEEE bits, rewriting with MPLS value 1
- MPLS EXP and IEEE 802.1p 1
- MPLS EXP and IPv4 1, 2, 3
- rules 1
- scheduler examples 1
- scheduler map examples 1
- scheduler priority 1
- configuration example 1
- scheduling 1
- associating with an interface 1
- associating with DLCI or VLAN 1, 2
- associating with fabric priority 1, 2
- associating with physical interface 1
- buffer size 1, 2, 3, 4
- chassis 1
- configuration example 1
- configuring a map 1
- default settings 1
- drop profile 1
- maximum delay per queue 1
- output interface 1, 2
- packet forwarding component 1, 2, 3
- platform differences 1
- priority 1, 2, 3
- strict-high priority 1
- transmission rate 1
- simple filter on Enhanced Queuing DPC 1
- traffic control profile examples 1
- transmission rate 1
- unclassified traffic 1
- WRED on Enhanced Queuing DPC 1
- CoS features
- PICs compared 1
- CoS packet flow
- MX Series 1
- CoS queues
- packet forwarding component 1
- CoS values 1
- CoS-based forwarding 1
- example configuration 1, 2
- curly braces, in configuration statements 1
- customer support 1
- contacting JTAC 1
D
- data statement 1
- usage guidelines 1
- delay buffer 1
- calculating 1, 2, 3
- maximum delay per queue 1
- shaping rate 1, 2, 3
- delay-buffer-rate statement 1
- usage guidelines 1, 2
- destination address classification 1, 2
- destination statement 1
- usage guidelines 1
- destination-address statement
- CoS 1
- usage guidelines 1
- DiffServ 1, 2, 3
- discard statement 1
- usage guidelines 1
- DLCIs
- excess bandwidth 1
- documentation set
- comments on 1
- DPCs
- applying traffic control profile examples 1
- drop profile examples 1
- hierarchical CoS introduction 1
- hierarchy examples 1
- interface examples 1
- interface set examples 1
- internal scheduler nodes 1
- scheduler examples 1
- scheduler map examples 1
- traffic control profile examples 1
- drop-probability statement 1, 2
- usage guidelines 1
See also RED- drop-profile statement 1
- RED 1
See also RED
- usage guidelines 1
- drop-profile-map statement 1
- usage guidelines 1, 2
- drop-profiles statement 1
- usage guidelines 1
- drop-timeout statement 1
- usage guidelines 1
- DSCP 1
- over Layer 3 VPNs 1
- dscp statement 1
- usage guidelines 1, 2, 3, 4, 5, 6
- dscp-code-point statement 1
- dscp-ipv6 statement 1
- usage guidelines 1, 2, 3, 4
E
- egress-shaping-overhead statement 1
- eight forwarding classes 1
- example configuration 1
- Enhanced IQ interfaces
- CoS and 1
- Enhanced IQ PICs
- interface speeds 1
- ToS translation 1
- Enhanced IQ PICs compared 1
- epd-threshold statement 1
- usage guidelines 1
- EQ DPCs
- rate limit 1
- Ethernet IQ2 PIC
- schedulers 1
- Ethernet IQ2 PICs
- RTT delay buffer values 1
- Excess bandwidth
- DLCIs 1
- excess bandwidth
- MS-PIC 1
- excess-bandwidth statement
- configuration guidelines 1
- excess-bandwidth-share statement 1
- usage guidelines 1
- excess-priority statement 1
- usage guidelines 1
- excess-rate statement 1
- usage guidelines 1
- EXP bits 1, 2
- exp statement 1
- usage guidelines 1, 2, 3, 4
- exp-push-push-push statement 1
- usage guidelines 1
- exp-swap-push-push statement 1
- usage guidelines 1
- explicit-null statement
- with MPLS EXP classifiers 1
F
- fabric priority queuing 1
- overriding 1
- fabric statement 1
- usage guidelines 1
- family statement
- ATM interfaces 1
- usage guidelines 1
- MF classifier
- usage guidelines 1
- MF classifiers 1
- fill-level statement 1
- usage guidelines 1
- filter statement 1
- usage guidelines 1
- firewall statement 1
- usage guidelines 1
- fixed classification 1
- font conventions 1
- forwarding classes 1
- assigning multiple to a queue 1
- assigning multiple to single queue 1
- assigning to an interface 1
- classifying packets by egress interface 1
- configuring up to 16 1
- example configuration 1
- default settings 1
- defining custom 1
- fragmentation 1
- overriding fabric priority queuing 1
- forwarding policy options 1
- forwarding, next-hop selection 1
- example configuration 1, 2
- for IPv6 1
- overriding the input classification 1
- forwarding-class aliases 1
- forwarding-class statement 1
- usage guidelines 1, 2, 3, 4, 5
- forwarding-classes statement 1
- usage guidelines 1, 2
- forwarding-classes-interface-specific statement 1
- usage guidelines 1
- forwarding-policy statement 1
- usage guidelines 1
- four loss priorities 1
- fragment-threshold statement 1
- usage guidelines 1
- fragmentation
- example configuration 1
- forwarding classes 1
- fragmentation-map statement 1
- usage guidelines 1
- fragmentation-maps statement 1
- usage guidelines 1
- from statement
- CoS 1
- usage guidelines 1
- stateful firewall
- usage guidelines 1
- ftp statement 1
- usage guidelines 1
G
- Gigabit Ethernet IQ interfaces
- CoS 1
- buffer sizes 1, 2
- guaranteed rate 1
- configuring with a shaping rate 1
- guaranteed-rate statement 1
- usage guidelines 1, 2
H
- hardware
- Enhanced Queuing DPC 1
- hierarchical scheduling
- Enhanced IQ interfaces 1
- hierarchical-scheduler statement 1
- high-plp-max-threshold statement 1
- usage guidelines 1
- high-plp-threshold statement 1
- usage guidelines 1
- host-outbound traffic statement 1
I
- icons defined, notice 1
- IEEE 802.1ad
- CoS classification of traffic 1
- ieee-802.1 statement 1
- usage guidelines 1
- ieee-802.1ad statement 1
- if-exceeding statement 1
- import statement 1
- usage guidelines 1
- in-the-box applications 1
- inet-precedence statement 1
- usage guidelines 1, 2, 3, 4
- ingress CoS
- on Enhanced Queuing DPC 1
- ingress-shaping-overhead statement 1
- usage guidelines 1
- input-excess-bandwidth-share statement 1
- usage guidelines 1
- input-policer statement 1
- input-scheduler-map statement 1
- usage guidelines 1
- input-shaping-rate statement 1
- usage guidelines 1
- input-three-color statement 1
- input-traffic-control-profile statement 1
- usage guidelines 1, 2
- input-traffic-control-profile-remaining statement 1
- usage guidelines 1
- interface-set statement 1
- interfaces
- aggregated Ethernet and SONET/SDH 1
- caveats 1
- example configuration 1
- ATM, VC tunnel CoS 1
- egress queues 1
- linear RED profiles 1
- scheduler maps 1
- scheduling on the logical interface 1
- scheduling priority 1
- CoS classifiers on 1
- Enhanced IQ CoS 1
- link services 1
- interfaces statement
- CoS 1
- usage guidelines 1
- internal-node statement 1
- usage guidelines 1
- interpolate statement 1
- usage guidelines 1
- introduction
- hierarchical schedulers 1
- IPsec
- and CoS 1
- IPv4 or IPv6 packets
- overriding input classification 1
- IQ PICs compared 1
- IQ2 PICs
- enhanced 1
- rate limit 1
- IQ2 PICs compared 1
- IQ2E PICs
- rate limit 1
- IQE PIC
- excess bandwidth 1
- interface modes 1
- queue default rates 1
- traffic calculation 1
- Traffic calculation 1
- traffic terminology 1
- IQE PICs
- excess bandwidth sharing 1
- L2 policing 1
- low latency static policer 1
- IRB statement
- usage guidelines 1
- irb statement
- CoS 1
L
- Layer 2 policer
- applying to interface 1
- example configurations 1
- Layer 3 VPN
- multifield classification 1
- layer2-policer statement 1
- usage guidelines 1
- linear-red-profile statement 1
- usage guidelines 1
- linear-red-profiles statement 1
- usage guidelines 1
- link services interfaces 1
- CoS components 1
- logical bandwidth policer
- example 1
- logical-bandwidth-policer statement 1
- usage guidelines 1
- logical-interface-policer statement 1
- usage guidelines 1
- loss-priority statement 1
- usage guidelines 1
- low-plp-max-threshold statement 1
- usage guidelines 1
- low-plp-threshold statement 1
- usage guidelines 1
- lsp-next-hop statement 1
- usage guidelines 1
- LSPs
- CoS values 1
M
- M320 and T Series PICs compared 1
- M320 router
- FPCs and CoS 1
- manuals
- comments on 1
- match-direction statement
- CoS 1
- usage guidelines 1
- max-queues-per-interface statement 1
- usage guidelines 1
- maximum delay per queue 1
- MDRR
- on Enhanced Queuing DPC 1
- member-link-scheduler
- usage guidelines 1
- member-link-scheduler statement 1
- mode statement 1
- usage guidelines 1
- MPLS
- CoS values 1
- EXP bits 1
- with CoS 1
- MPLS EXP classifiers
- for explicit-null labels 1
- routing instances 1
- example configuration 1
- MS-PIC
- excess bandwidth 1
- transmit rate limiting 1
- multilink-class statement 1
- usage guidelines 1
- MultiServices PIC
- CoS 1
- DLCI excess bandwidth 1
- MultiServices PICs
- CoS and 1
- ToS translation 1
- MX Series routers
- capabilities and limits 1
- CoS 1, 2, 3, 4, 5
- CoS packet flow 1
- IRB statement 1
N
- NAT
- CoS configuration 1
- next-hop selection
- example configuration 1, 2
- next-hop statement 1
- usage guidelines 1
- next-hop-map statement 1
- usage guidelines 1
- no-fragmentation statement 1
- usage guidelines 1
- non-lsp-next-hop statement 1
- usage guidelines 1
- nonqueuing
- bandwidth sharing examples 1
- bandwidth sharing overview 1
- bandwidth sharing rate limits 1
- notice icons defined 1
O
- one-rate four-color marking 1
- output-forwarding-class-map statement 1
- usage guidelines 1
- output-policer statement 1
- output-three-color statement 1
- output-traffic-control-profile statement 1
- usage guidelines 1, 2, 3
- output-traffic-control-profile-remaining statement 1
- usage guidelines 1
- oversubscription 1, 2
P
- packet forwarding component
- CoS queues 1
- packet loss priority See PLP
- parentheses, in syntax descriptions 1
- per-session-scheduler statement 1
- per-unit scheduling 1
- compared to shared scheduling 1
- on channelized IQ interfaces 1
- per-unit-scheduler statement 1
- usage guidelines 1
- PICs
- and hierarchical schedulers 1
- and hierarchical terms 1
- CoS features compared 1
- IQ2 unclassified traffic 1
- M320, T Series, IQ, IQ2 and Enhanced IQ compared 1
- queuing compared 1
- schedulers compared 1, 2
- ToS translation 1
- PIR 1
- configuring with CIR 1
- PLP 1
- plp-to-clp statement 1
- usage guidelines 1
- plp1 statement
- usage guidelines 1
- policer
- IQE interfaces 1
- Layer 2
- applying to interface 1
- example configurations 1
- policer statement
- firewall 1
- policers
- and shaping rate changes 1
- priority
- CoS propagation 1
- priority queuing, CoS 1
- priority statement 1
- usage guidelines
- ATM scheduler map 1
- CoS scheduling 1
- fabric priority queuing 1, 2
- priority, CoS
- configuration example 1
- protocol statement 1
- usage guidelines 1
- protocols
- CoS queue assignments
- changing 1
- defaults 1
Q
- q-pic-large-buffer statement 1
- usage guidelines 1
- queue level
- bandwidth sharing 1
- queue statement 1
- usage guidelines 1, 2
- queue-depth statement 1
- usage guidelines 1
- queue-num statement
- usage guidelines 1
- queuing
- PICs compared 1
- queuing priority, CoS 1
R
- random early detection mechanism See RED
- rate limit
- EQ DPC interfaces 1
- IQ2 interfaces 1
- IQ2E interfaces 1
- RED
- drop-probability statement
- usage guidelines 1, 2
- drop-profiles statement
- usage guidelines 1
- dropping packets 1, 2
- weighted
- configuring 1
- examples 1
- RED buffer occupancy weight
- configuring 1
- red-buffer-occupancy statement 1
- usage guidelines 1
- reflexive statement 1
- reflexive | reverse statement
- usage guidelines 1
- replicate
- scheduler mode 1
- restricted-queues statement 1
- usage guidelines 1
- reverse statement 1
- usage guidelines 1
- rewrite rules 1
- applying a default 1
- applying to VLAN tags 1, 2
- example configuration 1, 2
- assigning to interface 1
- defining custom 1
- EXP bits
- by node 1
- rewriting three labels 1
- EXP bits, by node 1
- IEEE bits
- applying to VLAN tags 1, 2
- example configuration 1, 2
- rewriting with MPLS value 1
- IPv6 packets 1
- MPLS EXP and IPv4 1
- example configuration 1
- rewrite-rules statement 1
- usage guidelines 1
- RFC 2698 1
- routing instances
- MPLS EXP classifier 1
- example configuration 1
- routing-instance statement
- usage guidelines 1
- routing-instances statement 1
- usage guidelines 1
- rtvbr statement 1
- usage guidelines 1
- rule statement
- CoS 1
- usage guidelines 1
- rule-set statement
- CoS 1
- usage guidelines 1
S
- scale
- scheduler mode 1
- scheduler
- shared input 1
- scheduler modes
- on aggregated interfaces 1
- replicate or scale 1
- scheduler statement 1
- usage guidelines 1
- scheduler-map statement 1
- usage guidelines 1, 2, 3, 4, 5
- scheduler-map-chassis statement 1
- usage guidelines 1
- scheduler-maps statement
- for ATM2 IQ interfaces 1
- usage guidelines 1
- for most non-ATM2 IQ interfaces 1
- usage guidelines 1
- schedulers
- applying traffic control profile examples 1
- drop profile examples 1
- Ethernet IQ2 PIC 1
- hierarchical 1
- hierarchical examples 1
- hierarchical introduction 1
- hierarchical terms 1
- hierarchy examples 1
- interface
- configuration example 1
- interface examples 1
- interface set application 1
- interface set caveats 1
- interface set configuration 1
- interface set examples 1
- internal nodes 1
- PICs compared 1, 2
- PIR-only and CIR mode 1
- priority propagation 1
- scheduler map examples 1
- traffic control profile examples 1
- unclassified traffic and 1
- schedulers statement 1
- usage guidelines 1, 2
- scheduling 1
- associating with an interface 1
- associating with DLCI or VLAN 1
- example configuration 1
- associating with fabric priority 1
- example configuration 1
- associating with physical interface 1
- buffer size 1
- for NxDS0 interfaces 1
- for slower interfaces 1, 2
- configuration example 1
- configuring a map 1
- default settings 1
- drop profile 1
- maximum delay per queue 1
- packet forwarding component 1
- assigning custom 1
- example configuration 1
- per-unit and shared, differences 1
- priority 1
- example configuration 1
- hardware mappings 1
- platform differences 1
- strict-high priority 1
- transmission rate 1
- services
- AS PIC
- CoS configuration 1
- MultiServices PIC
- CoS configuration 1
- services statement
- CoS 1
- usage guidelines 1
- shaping
- calculations 1
- Gigabit Ethernet IQ2 PICs and 1
- input and output 1
- example configuration 1
- output
- example configuration 1
- for DLCI or VLAN 1
- for physical interface 1
- shared 1
- with a guaranteed rate 1
- shaping rate
- changes and policers 1
- shaping statement 1
- usage guidelines 1
- shaping-rate statement 1
- usage guidelines 1, 2, 3
- shared scheduling 1
- compared to per-unit scheduling 1
- shared-instance statement 1
- shared-scheduler statement 1
- usage guidelines 1
- signaled LSPs
- CoS values 1
- simple filter
- on Enhanced Queuing DPC 1
- simple-filter statement
- interfaces 1
- usage guidelines 1
- sip statement 1
- usage guidelines 1
- source-address statement
- CoS 1
- usage guidelines 1
- stateful firewall
- CoS configuration 1
- strict-high priority, explained 1
- support, technical See technical support
- syntax conventions 1
- syslog statement
- CoS 1
- usage guidelines 1
T
- technical support
- contacting JTAC 1
- term statement
- CoS 1
- usage guidelines 1
- firewall
- normal filter 1
- simple filter 1
- usage guidelines 1
- then statement
- CoS 1
- usage guidelines 1
- stateful firewall
- usage guidelines 1
- three-color-policer statement 1
- usage guidelines 1
- ToS translation
- MultiServices PICs 1
- traffic-control-profiles statement 1
- usage guidelines 1, 2, 3
- traffic-manager statement 1
- translation-table statement 1
- usage guidelines 1
- transmission rate, CoS 1
- transmit rate limiting
- MS-PIC 1
- transmit-rate statement 1
- usage guidelines 1
- transmit-weight statement 1
- usage guidelines 1
- tri-color statement 1
- usage guidelines 1
- tricolor marking
- filter, applying to 1
- single-rate
- color-aware mode 1
- color-blind mode 1
- two-rate
- color-aware mode 1
- color-blind mode 1
- tricolor marking policer 1
- configuring 1
- enabling 1
- example configuration 1, 2, 3
- filter, applying to 1
- interface, applying to 1
- verifying your configuration 1
- with BA classifier 1
- with drop-profile map 1
- with MF classifier 1
- with rewrite rule 1
- tunnels
- CoS and 1
- CoS and IPsec 1
- two-rate tricolor marking 1
- configuring the policer 1
- enabling 1
- example configuration 1, 2, 3
- interface, applying to 1
- verifying your configuration 1
- with BA classifier 1
- with drop-profile map 1
- with MF classifier 1
- with rewrite rule 1
U
- unit statement
- CoS 1
- usage guidelines 1
- usage guidelines 1
V
- vbr statement 1
- usage guidelines 1
- VC tunnel CoS
- ATM2 IQ interfaces 1
- vc-cos-mode statement 1
- usage guidelines 1
- vci statement 1
- usage guidelines 1
- video statement 1
- usage guidelines 1
- VLAN tag
- BA classifiers 1
- VLAN tags
- application of rewrite rules to 1, 2
- example configuration 1, 2
- vlan-tag statement 1
- usage guidelines 1, 2
- voice statement 1
- usage guidelines 1
- VoIP traffic classification 1
- VPLS
- BA classifiers 1
- default classifiers for 1
W
- weighted RED
- configuring 1
- examples 1
- WRED
- on Enhanced Queuing DPC 1