Symbols
- #, comments in configuration statements 1
- ( ), in syntax descriptions 1
- < >, in syntax descriptions 1
- [ ], in configuration statements 1
- { }, in configuration statements 1
- | (pipe), in syntax descriptions 1
A
- accept
- firewall filters
- action 1
- accept-remote-nexthop statement 1
- usage guidelines 1
- accepted-prefix-limit statement 1
- usage guidelines 1
- access-profile statement
- routing instances 1
- action modifiers, firewall filters 1
- active aggregate routes 1
- active routes 1, 2
- active statement
- aggregate routes 1
- usage guidelines 1
- generated routes 1
- usage guidelines 1
- static routes 1
- usage guidelines 1
- address statement 1
- usage guidelines 1
- advertise statement 1
- usage guidelines 1
- advertise-external statement 1
- usage guidelines 1
- advertise-inactive statement 1
- usage guidelines 1
- advertise-peer-as statement 1
- usage guidelines 1
- advertise-unnumbered-interfaces statement
- OSPF
- usage guidelines 1
- aggregate routes 1, 2
- preferences 1
- aggregate statement 1
- usage guidelines 1
- aggregate-label statement 1
- usage guidelines 1
- aggregator path attribute, BGP See BGP, aggregator path attribute
- aggregator statement 1
- alert (system logging severity level) 1
- all (tracing flag) 1
- allow statement 1
- usage guidelines 1
- alternate preferences 1
- always-compare-med option 1, 2
- any-sender statement
- RIP 1
- usage guidelines 1
- area statement 1
- usage guidelines 1
- area-range statement 1
- usage guidelines 1
- AS external link advertisements 1
- as-override statement 1
- as-path (tracing flag) 1
- as-path statement 1
- aggregate routes
- usage guidelines 1
- generated routes
- usage guidelines 1
- static routes
- usage guidelines 1
- ASs 1
- configuring 1, 2, 3
- paths 1
- aggregate routes 1, 2
- generated routes 1, 2
- operations, tracing 1
- static routes 1, 2
- private, removing 1, 2
- auth (tracing flag) 1
- authentication
- algorithm
- BGP 1
- BGP 1
- keychains
- BGP 1
- MD5
- BGP 1
- OSPF 1
- OSPFv3 1
- simple
- RIP 1
- authentication configuration
- BFD 1, 2, 3, 4, 5
- authentication-algorithm statement
- BGP 1
- usage guidelines 1
- authentication-key statement
- BGP 1
- usage guidelines 1
- IS-IS 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- authentication-key-chain statement 1
- BGP
- usage guidelines 1
- usage guidelines 1
- authentication-type statement
- IS-IS 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- auto-export
- routing instance 1
- auto-export statement 1
- usage guidelines 1
- autonomous statement 1
- usage guidelines 1
- autonomous systems See ASs
- autonomous-system statement 1
- usage guidelines 1, 2
B
- bandwidth-based metrics
- OSPF 1
- bandwidth-based-metrics statement 1
- usage guidelines 1
- BFD
- authentication configuration 1, 2, 3, 4, 5
- protocol 1, 2, 3, 4, 5
- traceoptions statement
- usage guidelines 1
- bfd statement 1
- bfd-liveness-detection statement
- BGP 1
- usage guidelines 1
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- static routes 1
- usage guidelines 1, 2
- BGP
- aggregator path attribute 1, 2
- AS numbers, peers 1
- ASs See ASs
- authentication 1, 2, 3
- authentication algorithm 1
- authentication keychain 1
- autonomous system override 1
- best external route
- advertising 1
- BFD 1, 2
- CLNS 1
- communities
- aggregate routes 1
- generated routes 1
- static routes 1
- confederations 1, 2, 3
- configuration statements 1, 2, 3
- configuring EBGP groups 1
- description 1
- EBGP IPv6 peering 1
- enabling on router 1, 2, 3
- external (EBGP) 1
- graceful restart 1
- groups 1, 2
- hold time 1, 2, 3
- identifier 1, 2
- idle-after-switch-over statement 1
- internal (IBGP) 1
- IP address 1, 2
- IPsec 1, 2
- keepalive messages 1, 2
- local address 1, 2
- local AS 1
- local interface 1
- messages 1
- MP-BGP 1, 2
- MTU discovery 1
- multihop sessions 1
- multipath configuration 1
- multiprotocol reachability 1
- Multitopology Routing
- configuring 1
- neighbors BGP, peers See BGP, peers
- NLRI 1
- IPv4 VPN 1
- IPv6 VPN 1
- open messages 1, 2, 3
- outbound route filters
- interoperability 1
- overview 1
- packets, tracing 1
- passive mode 1
- path attributes 1, 2, 3
- peers 1, 2, 3
- policy, routing 1, 2
- precedence 1
- preferences 1, 2, 3
- prefix-limit
- accepted 1
- received 1
- resolve routes to other tables 1
- route reflection 1, 2, 3
- route target filtering 1, 2
- router identifier 1, 2
- routes 1
- routing instances
- configure 1
- routing tables
- delays in exchanging routes 1, 2
- nonactive routes 1, 2
- retaining routes 1
- set local AS number 1
- standards supported 1
- system log messages 1
- TCP 1
- TCP port block 1
- tracing operations 1
- type, group 1
- update messages 1
- version supported 1
- VRF export policy 1
- BGP Monitoring Protocol 1
- configuring 1
- bgp statement 1
- usage guidelines 1
- bgp-orf-cisco-mode statement 1
- bmp statement 1
- usage guidelines 1
- BOOTP
- accepting packets 1
- Border Gateway Protocol See BGP
- braces, in configuration statements 1
- brackets
- angle, in syntax descriptions 1
- square, in configuration statements 1
- brief statement 1
- aggregate routes
- usage guidelines 1
- generated routes
- usage guidelines 1
- broadcast mode, router discovery 1
- broadcast statement 1
- usage guidelines 1
C
- check-zero statement 1
- usage guidelines 1
- checksum statement 1
- usage guidelines 1
- cisco-non-deterministic option 1, 2
- class of service-based forwarding, configure 1
- CLNS 1
- BGP 1
- static routes 1
- clns-routing statement
- IS-IS 1
- usage guidelines 1
- cluster statement 1
- usage guidelines 1
- color statement
- aggregate routes 1
- usage guidelines 1
- generated routes 1
- usage guidelines 1
- static routes 1
- usage guidelines 1
- comments, in configuration statements 1
- communities
- aggregate routes 1, 2
- generated routes 1
- static routes 1, 2
- community statement
- aggregate routes 1
- usage guidelines 1
- generated routes 1
- usage guidelines 1
- Multitopology Routing 1
- usage guidelines 1
- static routes 1
- usage guidelines 1, 2
- complete sequence number PDUs, IS-IS See IS-IS, complete sequence number PDUs
- confederation statement 1
- usage guidelines 1, 2
- confederations 1, 2, 3
- config-internal (tracing flag) 1
- configuration mode, CLI
- statement hierarchy 1
- configuration statements
- ES-IS 1
- contributing routes
- aggregate routes 1
- generated routes 1
- conventions
- text and syntax 1
- count (firewall filter action) 1
- credibility-protocol-preference
- OSPF
- usage guidelines 1
- traffic engineering
- IS-IS 1
- critical (system logging severity level) 1
- cryptographic-address statement 1
- usage guidelines 1
- csn (tracing flag) 1
- csnp-interval statement 1
- usage guidelines 1
- curly braces, in configuration statements 1
- current-hop-limit statement 1
- usage guidelines 1
- customer support 1
- contacting JTAC 1
D
- damping 1, 2
- damping (tracing flag) 1
- damping statement 1
- usage guidelines 1
- database description packets 1
- dead-interval statement 1
- usage guidelines 1
- debug (system logging severity level) 1
- default-lifetime statement 1
- usage guidelines 1
- default-lsa statement 1
- usage guidelines 1
- default-metric statement 1
- usage guidelines 1
- defaults statement
- aggregate statement 1
- usage guidelines 1
- generate statement 1
- usage guidelines 1
- static statement 1
- usage guidelines 1
- delay statement
- IS-IS 1
- OSPF 1
- demand-circuit statement 1
- OSPF
- usage guidelines 1
- usage guidelines 1
- description statement 1, 2
- usage guidelines 1
- designated router
- IS-IS 1
- OSPF 1, 2
- destination-networks statement 1
- usage guidelines 1
- destination-port (firewall filter match condition) 1
- detail (tracing flag modifier) 1
- detection-time statement
- BFD 1
- BGP 1
- IS-IS 1
- DHCP
- accepting 1
- disable statement
- BGP 1
- usage guidelines 1
- ES-IS 1, 2
- usage guidelines 1
- graceful restart
- usage guidelines 1
- IS-IS 1
- graceful restart 1
- LDP synchronization 1
- usage guidelines 1, 2
- OSPF 1
- LDP synchronization 1
- usage guidelines 1
- router discovery 1
- routing options
- usage guidelines 1
- disabling multicast on an interface 1
- discard (firewall filter action) 1
- discard statement
- aggregate routes 1
- generated routes 1
- discard statement, in static statement
- usage guidelines 1
- documentation set
- comments on 1
- domain-id statement 1
- usage guidelines 1
- domain-vpn-tag statement 1
- usage guidelines 1
- dscp (firewall filter match condition) 1
- Dynamic Host Configuration Protocol DHCP See DHCP
- dynamic tunnels 1
- source 1
- dynamic-tunnels statement 1
- usage guidelines 1
E
- EBGP See BGP
- EBGP IPv6 peering, BGP 1
- emergency (system logging severity level) 1
- enable statement
- routing options 1
- usage guidelines 1
- enabling multicast on an interface 1
- end-system-configuration-timer statement 1
- usage guidelines 1
- equal-cost paths 1, 2
- error (system logging severity level) 1
- error (tracing flag)
- ES-IS 1
- IS-IS 1
- neighbor discovery 1
- OSPF 1
- RIP 1
- RIPng 1, 2
- router discovery 1
- ES-IS 1
- CLNS 1
- end system configuration timer 1
- errored packets 1
- graceful restart 1, 2, 3
- disable 1
- hello
- PDUs 1, 2
- hello interval 1
- preference 1
- esis statement 1
- usage guidelines 1
- Ethernet interfaces, unnumbered
- as next-hop interface for static routes 1
- configuration example 1
- except (firewall filter match condition) 1
- expiration (tracing flag) 1
- neighbor discovery 1
- explicit-null statement 1
- usage guidelines 1
- export statement
- BGP 1
- usage guidelines 1
- forwarding table 1
- usage guidelines 1, 2
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- export-rib statement 1
- usage guidelines 1
- external-preference statement
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- external-router-id option 1
F
- family statement
- BGP 1
- usage guidelines 1
- IS-IS 1
- usage guidelines 1
- fate-sharing statement 1
- usage guidelines 1
- FBF, configuring 1
- filter statement 1
- usage guidelines 1
- filter-based forwarding
- configuring 1
- Multitopology Routing 1
- flash (tracing flag) 1
- flood-reduction statement 1
- flooding (tracing flag) 1
- flow routes 1
- BGP 1
- flow statement 1, 2
- usage guidelines 1, 2
- font conventions 1
- forwarding table
- aggregate routes 1, 2, 3
- generated routes 1, 2
- overview 1
- policy, routing 1
- static routes 1, 2, 3, 4, 5, 6, 7, 8, 9
- synchronizing 1
- forwarding-cache statement 1
- usage guidelines 1
- forwarding-class (firewall filter action) 1
- forwarding-table statement 1
- usage guidelines 1
- fragment-offset (firewall filter match condition) 1
- full statement 1
- aggregate routes
- usage guidelines 1
- generated routes
- usage guidelines 1
G
- general (tracing flag) 1
- neighbor discovery 1
- RIPng 1
- generate statement 1
- usage guidelines 1, 2
- generated routes 1, 2
- preferences 1
- graceful restart 1
- graceful-restart (tracing flag) 1
- IS-IS 1
- OSPF 1
- graceful-restart statement
- BGP 1
- usage guidelines 1
- ES-IS 1
- usage guidelines 1
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- usage guidelines 1
- group statement
- BGP 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- usage guidelines 1
H
- hello (tracing flag)
- ES-IS 1, 2
- IS-IS 1
- hello packets
- IS-IS 1
- OSPF 1
- hello-authentication-key statement 1
- IS-IS
- usage guidelines 1
- hello-authentication-type statement 1
- usage guidelines 1
- hello-interval statement
- ES-IS 1
- usage guidelines 1
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- hello-padding statement 1
- usage guidelines 1
- helper-disable statement
- IS-IS 1
- usage guidelines 1
- hold-time statement
- BGP 1
- usage guidelines 1
- IS-IS 1
- LDP synchronization 1
- usage guidelines 1
- OSPF
- LDP synchronization 1
- holddown (tracing flag) 1, 2
- neighbor discovery 1
- holddown statement
- IS-IS 1
- OSPF 1
- RIP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- holddown-interval statement
- BFD
- static routes 1
- BFD (static routes
- usage guidelines 1
I
- IBGP See BGP
- ICMP router discovery 1
- icmp-code (firewall filter match condition) 1
- icmp-type (firewall filter match condition) 1
- icons defined, notice 1
- identifiers
- BGP See BGP, identifier
- router See router identifier
- idle-after-switch-over statement 1
- ignore statement 1, 2
- usage guidelines 1
- ignore-attached-bit statement 1
- usage guidelines 1
- ignore-lsp-metrics statement
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- import statement
- BGP 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- route resolution 1
- usage guidelines 1
- import-policy statement 1
- usage guidelines 1
- import-rib statement 1
- usage guidelines 1
- include-mp-next-hop statement 1
- usage guidelines 1
- independent-domain statement 1
- indirect next hop 1, 2
- indirect-next-hop statement 1
- usage guidelines 1
- ineligible statement 1, 2
- inet.0 routing table 1
- inet.1 routing table 1
- inet.2 routing table 1, 2
- inet.3 routing table 1
- inet6.0 routing table 1, 2
- info (system logging severity level) 1
- info (tracing flag) 1
- input statement 1
- usage guidelines 1
- install statement 1
- usage guidelines 1
- instance type, configuring 1
- instance-export statement 1
- usage guidelines 1
- instance-import statement 1
- usage guidelines 1
- instance-name.inet.0 routing table 1
- instance-type statement 1
- usage guidelines 1
- instances
- routing, multiple 1
- inter-area-prefix-export statement
- OSPFv3 1
- usage guidelines 1
- inter-area-prefix-import statement
- OSPFv3 1
- usage guidelines 1
- interface statement
- ES-IS 1
- usage guidelines 1
- IS-IS 1, 2
- usage guidelines 1
- multicast scoping 1
- usage guidelines 1
- multicast via static routes 1
- neighbor discovery 1
- usage guidelines 1
- OSPF 1, 2
- usage guidelines 1, 2
- router discovery 1
- routing options
- usage guidelines 1
- static routes
- usage guidelines 1
- interface-group (firewall filter match condition) 1
- interface-routes statement 1
- usage guidelines 1
- interface-type statement 1
- usage guidelines 1
- interfaces descriptive text 1
- Intermediate System-to-Intermediate System protocol See IS-IS
- Internet Control Message Protocol router discovery See router discovery
- ipsec-sa statement 1
- BGP 1
- OSPF
- usage guidelines 1
- usage guidelines 1, 2
- ipv4-multicast statement
- IS-IS 1
- usage guidelines 1
- ipv4-multicast-metric statement 1
- usage guidelines 1
- IPv6
- addressing 1
- representation 1
- structure 1
- types 1
- benefits 1
- EBGP link-local peering 1
- header fields 1
- ipv6-multicast statement
- IS-IS 1
- ipv6-multicast-metric statement 1
- ipv6-unicast statement 1
- usage guidelines 1
- ipv6-unicast-metric statement 1
- IS-IS
- addresses 1
- areas 1
- authentication 1, 2, 3
- CSNP 1
- hello 1
- PSNP 1
- BFD 1, 2
- checksum 1, 2
- CLNS 1, 2
- export BGP routes 1
- pure ISO network 1
- complete sequence number PDUs 1, 2, 3, 4, 5
- configuration statements 1
- designated router 1, 2
- disabling 1, 2, 3
- IPv4 multicast topology 1
- IPv4 routing 1
- IPv4 unicast topology 1
- IPv6 multicast topology 1
- IPv6 routing 1
- IPv6 unicast topology 1
- enabling 1, 2
- IPv4 routing 1
- IPv6 routing 1
- errored packets 1
- errored PDUs 1
- graceful restart 1, 2
- disable 1
- hello
- interval 1, 2
- packet authentication 1, 2
- packet authentication key 1
- PDUs 1, 2, 3
- hold time 1, 2
- hold-down timer
- disabling 1
- interfaces 1
- IP fast reroute 1
- IPv4 unicast topology 1
- IPv6 unicast topology 1, 2
- label-switched path 1
- LDP synchronization 1, 2
- hold time 1
- level properties
- global 1
- interfaces 1
- link protection
- IS-IS 1
- link-protection statement 1
- link-state PDUs See IS-IS, LSPs
- loop-free alternate routes 1
- loose authentication 1, 2
- LSPs 1, 2, 3, 4
- errored 1
- generation 1
- interval 1, 2
- lifetime 1, 2
- tracing 1, 2
- mesh groups 1, 2, 3
- metrics 1, 2, 3
- IPv6 1
- multicast 1, 2
- normal 1
- traffic engineering 1
- wide 1, 2
- multicast reverse-path forwarding 1
- multicast topologies 1, 2, 3
- IPv4 1
- IPv6 1
- network PDUs 1
- no-eligible-backup statement 1
- node link protection 1, 2
- NSAP 1
- overloaded, marking router as 1, 2, 3
- packets See IS-IS, PDUs
- padding 1, 2
- partial sequence number PDUs 1, 2, 3
- PDUs 1
- point-to-point interface 1, 2
- policy, routing 1, 2
- preferences 1, 2, 3, 4, 5, 6
- prefix limit 1, 2, 3
- protocol data units See IS-IS, PDUs
- protocol task processing 1
- protocol timer processing 1
- route tagging 1
- routing domains 1
- routing instances
- configure 1
- routing instances minimum configuration 1
- RSVP LSP backup paths 1
- SPF delay calculations 1, 2
- standards supported 1
- state transitions 1
- topology 1
- tracing operations 1, 2
- traffic engineering
- lsp metrics 1
- traffic engineering support 1, 2, 3, 4, 5, 6
- wide metrics 1
- isis statement 1
- usage guidelines 1
- ISO
- addresses 1
- system identifier 1
- iso-vpn statement 1
- usage guidelines 1
K
- keep statement 1
- usage guidelines 1
- keepalive (tracing flag)
- BGP 1
- keepalive messages 1
- kernel (tracing flag) 1
- key-length statement 1
- usage guidelines 1
- key-pair statement 1
- usage guidelines 1
- keychain
- BGP 1
L
- label-switched-path statement
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- labeled-unicast statement 1
- usage guidelines 1
- last resort, route of generated routes See generated routes
- Layer 2 VPN
- routing instances
- minimum configuration 1
- LDP
- routing instances
- configure multiple 1
- minimum configuration 1
- ldp-synchronization statement
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- level statement
- IS-IS
- interfaces 1
- protocol 1
- usage guidelines 1
- lifetime statement 1
- usage guidelines 1
- link-protection statement 1
- link-protection-statement
- usage guidelines 1
- link-state acknowledgment packets See OSPF, link-state acknowledgment packets
- link-state advertisements See OSPF, link-state advertisements
- link-state PDUs See IS-IS, LSPs
- load sharing 1
- local AS
- BGP 1
- local statement
- OSPF 1
- usage guidelines 1
- local-address statement
- BFD 1
- usage guidelines 1
- BGP 1
- usage guidelines 1
- local-as statement 1
- usage guidelines 1
- local-interface statement
- BGP 1
- usage guidelines 1
- local-preference statement 1
- usage guidelines 1
- log (firewall filter action) 1
- log-updown statement 1
- BGP
- usage guidelines 1
- logging
- routing protocol process 1
- logging, routing protocol process 1
- logical system 1
- configuration statements 1
- minimum configuration 1
- overview 1
- logical-systems statement 1
- usage guidelines 1
- loose-authentication-check statement
- IS-IS 1
- usage guidelines 1
- loss-priority (firewall filter action) 1
- LSAs See OSPF, link-state advertisements
- lsp (tracing flag) 1
- lsp-generation (tracing flag) 1
- lsp-interval statement 1
- usage guidelines 1
- lsp-lifetime statement 1
- usage guidelines 1
- lsp-metric-into-summary statement 1
- OSPF
- usage guidelines 1
- lsp-next-hop statement 1
- usage guidelines 1, 2
- lsp-next-hop, static routes 1, 2
- LSPs 1
- MPLS, fate-sharing 1
See also IS-IS, LSPs, MPLS
M
- managed-configuration statement 1
- usage guidelines 1
- manuals
- comments on 1
- martian addresses 1, 2, 3
- martians statement 1
- usage guidelines 1, 2
- match conditions
- firewall filters
- overview 1
- max-advertisement-interval statement 1, 2
- ICMP
- usage guidelines 1
- neighbor discovery
- usage guidelines 1
- max-areas statement 1
- usage guidelines 1
- maximum-paths statement 1
- usage guidelines 1
- maximum-prefixes statement 1
- usage guidelines 1
- MD5 authentication 1
- BGP 1
- OSPF 1
- md5 statement
- OSPF 1
- MED See BGP
- med-igp-update-interval statement 1
- usage guidelines 1
- med-plus-igp statement 1
- usage guidelines 1
- members statement
- usage guidelines 1
- mesh groups 1, 2
- mesh-group statement 1
- usage guidelines 1
- message-size statement 1
- usage guidelines 1
- metric statement
- aggregate routes 1
- usage guidelines 1
- CLNS
- usage guidelines 1
- generated routes 1
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1, 2
- qualified next hop 1
- usage guidelines 1
- static routes 1
- usage guidelines 1, 2
- metric-in statement
- RIP 1
- RIPng 1
- usage guidelines 1
- usage guidelines 1
- metric-out statement
- BGP 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- metric-type statement 1
- usage guidelines 1, 2
- metrics
- IS-IS 1, 2, 3
- OSPF 1, 2, 3
- RIP 1
- RIPng 1, 2
- static routes 1
- min-advertisement-interval statement 1, 2
- neighbor discovery
- usage guidelines 1
- usage guidelines 1
- minimum-interval statement
- BFD 1
- usage guidelines 1
- BGP 1
- IS-IS 1
- OSPF 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- minimum-receive-interval statement
- BFD 1
- usage guidelines 1
- BFD (BGP)
- usage guidelines 1
- BGP 1
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- minimum-receive-ttl statement
- BFD 1
- BFD (static routes)
- usage guidelines 1
- MP-BGP 1, 2, 3
- MPLS
- ultimate-hop popping 1
- mpls.0 routing table 1
- MSDP
- configuring multiple instances 1
- MSDP routing instances, minimum configuration 1
- mtu-discovery statement 1
- BGP
- usage guidelines 1
- multiarea adjacency
- OSPF 1
- multicast
- scoping 1
- multicast statement 1
- router discovery 1
- usage guidelines 1
- routing options
- usage guidelines 1
- multicast-rpf-routes statement 1
- IS-IS
- usage guidelines 1
- OSPF
- usage guidelines 1
- multihop statement 1
- usage guidelines 1
- multipath statement 1
- multiple active routes 1
- multiplier statement
- BFD 1
- usage guidelines 1
- BFD (BGP)
- usage guidelines 1
- BGP 1
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- multiprotocol BGP (MP-BGP) 1, 2
- Multitopology Routing
- BGP
- configuring 1
- community statement 1
- filter-based forwarding 1
- OSPF
- configuring 1
- overview 1
- static routes 1
- topologies
- configuring 1
N
- neighbor discovery
- autoconfiguration 1
- autonomous 1
- basics 1
- configuration statements 1, 2
- enabling 1
- frequency 1
- hop limit 1
- neighbor solicitation, frequency 1
- onlink 1
- preferred lifetime 1
- prefix information 1
- reachable time 1
- router advertisements 1
- router lifetime 1
- standards documents 1
- valid lifetime 1
- neighbor statement
- BGP 1
- usage guidelines 1, 2
- OSPF 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- neighbor-discovery statement 1
- usage guidelines 1
- neighbors
- BGP 1
- OSPF 1
- RIP 1
- RIPng 1
- network layer reachability information See BGP, NLRI
- network link advertisements 1
- network PDUs 1
- network protocol data units See IS-IS, network PDUs
- network service access point 1
- network-summary-export statement 1
- usage guidelines 1
- network-summary-import statement 1
- usage guidelines 1
- next-hop statement
- CLNS
- usage guidelines 1
- next-table statement
- usage guidelines 1
- NLRI, BGP 1
- no-adaptation
- BFD (BGP)
- usage guidelines 1
- no-adaptation statement
- BFD 1
- BFD (IS-IS)
- usage guidelines 1
- BFD (static routes)
- usage guidelines 1
- BGP 1
- IS-IS 1
- OSPF 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- no-adjacency-holddown statement 1
- usage guidelines 1
- no-advertise-peer-as statement
- usage guidelines 1
- no-aggregator-id statement 1
- usage guidelines 1
- no-authentication-check statement 1
- usage guidelines 1
- no-autonomous statement
- usage guidelines 1
- no-check-zero statement 1
- usage guidelines 1
- no-client-reflect statement 1
- usage guidelines 1
- no-csnp-authentication statement 1
- usage guidelines 1
- no-eligible-backup statement 1
- no-hello-authentication statement 1
- usage guidelines 1
- no-indirect-next-hop statement
- usage guidelines 1
- no-install statement 1
- usage guidelines 1
- no-ipv4-multicast statement 1
- usage guidelines 1
- no-ipv4-routing statement 1
- usage guidelines 1
- no-ipv6-multicast statement 1
- usage guidelines 1
- no-ipv6-routing statement 1
- usage guidelines 1
- no-ipv6-unicast statement 1
- no-managed-configuration statement 1
- usage guidelines 1
- no-nssa-abr statement 1
- OSPF
- usage guidelines 1
- no-on-link statement
- usage guidelines 1
- no-other-stateful-configuration statement
- usage guidelines 1
- no-prepend-global-as statement
- usage guidelines 1
- no-psnp-authentication statement 1
- usage guidelines 1
- no-readvertise statement 1
- usage guidelines 1
- no-retain statement 1
- usage guidelines 1
- no-rfc-1583 statement 1
- usage guidelines 1
- no-unicast-topology statement 1
- usage guidelines 1
- no-validate statement 1
- no-vrf-advertise statement 1
- usage guidelines 1
- node-link-protection statement 1
- usage guidelines
- IS-IS 1
- nonstop-routing statement 1
- usage guidelines 1
- normal (tracing flag) 1
- neighbor discovery 1
- RIPng 1
- notice (system logging severity level) 1
- notice icons defined 1
- NPDUs See IS-IS, network PDUs
- NSAP 1
- nssa statement 1
- usage guidelines 1
O
- on-link statement 1
- usage guidelines 1
- open messages, BGP 1
- Open Shortest Path First See OSPF
- options statement 1
- usage guidelines 1
- OSPF
- adjacencies 1
- area border routers 1
- areas
- configuring 1
- nonbackbone 1
- AS external link advertisements 1
- authentication 1, 2
- md5 1
- simple 1
- backbone 1, 2
- bandwidth-based metrics 1
- configuring 1
- BFD 1, 2
- configuration statements 1
- configuring 1
- cost See OSPF, metrics
- database description packets 1
- default route 1
- demand circuits 1
- designated router 1, 2, 3
- domain ID
- configuring 1
- enabling 1, 2, 3, 4, 5, 6
- error packets 1
- flood-reduction statement 1
- graceful restart 1, 2
- hello interval 1, 2, 3
- hello packets 1
- interface types 1
- label-switched path 1
- LDP synchronization 1, 2
- hold time 1
- link-state
- acknowledgment packets 1
- advertisements 1, 2, 3, 4
- flooding packets 1
- request packets 1
- update packets 1
- LSAs See OSPF, link-state advertisements
- metric-type statement
- usage guidelines 1
- metrics 1, 2, 3, 4
- traffic engineering 1
- multiarea adjacency
- configuring 1
- NBMA networks 1
- neighbors 1, 2, 3
- network link advertisements 1
- nonbroadcast, multiaccess networks 1
- NSSAs 1, 2
- overload bit 1
- packets 1, 2, 3
- passive mode 1, 2
- passive traffic-engineering mode 1
- peer interfaces 1
- peer-interfaces 1
- policy, routing 1, 2, 3
- network summaries 1
- route install priority. 1
- preferences 1, 2, 3
- prefix limit 1, 2, 3
- route cost See OSPF, metrics
- route summarization 1, 2
- route-type-community statement 1
- usage guidelines 1
- router dead interval 1
- router identifier 1
- router link advertisements 1
- routing algorithm 1
- routing instances, configure multiple 1, 2
- sham link 1, 2, 3
- SPF 1, 2
- standards documents 1
- stub areas 1, 2, 3
- summary link advertisements 1
- tags
- aggregate routes 1, 2
- generated routes 1, 2
- static routes 1, 2
- timers 1
- topological database 1
- tracing operations 1
- traffic engineering features 1
- traffic engineering support 1, 2
- transmission delay 1, 2
- transmit interval 1
- virtual links 1, 2
- ospf statement 1
- usage guidelines 1, 2
- ospf3 statement 1
- OSPFv2
- authentication, configuring 1
- OSPFv3
- authentication 1, 2
- enabling 1
- multiple address families
- configuring 1
- routing instances, configure multiple 1
- other-stateful-configuration statement 1
- usage guidelines 1
- out-delay statement 1
- usage guidelines 1
- outbound-route-filter statement
- BGP 1
- overload statement
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
P
- p2mp-lsp-next-hop statement 1
- usage guidelines 1
- packet-dump (tracing flag) 1
- packet-length (firewall filter match condition) 1
- packets (tracing flag)
- BGP 1
- IS-IS 1
- neighbor discovery 1
- OSPF 1
- RIP 1
- RIPng 1
- router discovery 1
- parentheses, in syntax descriptions 1
- parse (tracing flag) 1
- partial sequence number PDUs See IS-IS, partial sequence number PDUs
- passive statement 1
- aggregate routes 1
- usage guidelines 1
- BGP 1
- usage guidelines 1
- generated routes 1
- usage guidelines 1
- IS-IS 1
- usage guidelines 1, 2
- OSPF
- usage guidelines 1
- static routes 1
- usage guidelines 1
- path attributes, BGP 1, 2, 3, 4
- path-selection statement 1
- usage guidelines 1
- PDUs See IS-IS, PDUs
- peer-as statement 1
- usage guidelines 1
- peer-interface statement 1
- usage guidelines 1
- per-packet load balancing 1
- physical interfaces, descriptive text 1
- PIM
- configuring multiple instances 1
- PIM routing instances, minimum configuration 1
- point-to-point statement 1
- usage guidelines 1
- policers
- firewall filter action 1
- policy (tracing flag) 1
- neighbor discovery 1
- RIPng 1
- policy statement
- aggregate routes 1
- usage guidelines 1
- generated routes 1
- usage guidelines 1
- policy, routing
- aggregate routes 1
- BGP 1, 2
- description 1
- forwarding table 1
- generated routes 1
- IS-IS 1, 2
- OSPF 1, 2, 3
- network summaries 1
- precedence 1
- RIP 1, 2
- RIPng 1, 2
- routing instance 1
- policy-based instance export, configuring 1
- poll-interval statement 1
- usage guidelines 1
- port (firewall filter match condition) 1
- ppm statement 1
- usage guidelines 1
- precedence (firewall filter match condition) 1
- preference statement
- aggregate routes 1
- usage guidelines 1
- BGP 1
- usage guidelines 1
- CLNS static routes
- usage guidelines 1
- ES-IS 1
- usage guidelines 1
- generated routes 1
- usage guidelines 1
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- static routes 1
- usage guidelines 1, 2, 3
- preferences
- active routes 1, 2
- aggregate routes 1, 2
- generated routes 1
- alternate preferences 1
- default 1
- generated routes 1
- IS-IS 1, 2, 3, 4
- modifying
- with configuration statements 1
- OSPF 1, 2
- overview 1
- RIP 1
- static routes 1, 2, 3, 4, 5, 6
- tie-breaker preferences 1
- preferred-lifetime statement 1
- usage guidelines 1
- prefix limit
- IS-IS 1, 2
- OSPF 1, 2
- prefix statement 1
- neighbor discovery 1
- usage guidelines 1
- usage guidelines 1
- prefix-export-limit statement
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- prefix-limit statement 1
- usage guidelines 1, 2
- primary routing tables 1
- priority statement
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- router discovery 1
- protocol data units 1, 2
See also IS-IS, PDUs
- protocol-independent routing properties See aggregate routes
- protocols
- firewall filter match condition 1
- match condition
- firewall filters 1
- protocols statement 1
- psn (tracing flag) 1
- PSNP IS-IS See IS-IS, partial sequence number PDUs
Q
- qualified-next-hop statement 1
- CLNS
- usage guidelines 1
- usage guidelines 1
R
- rapid-runs statement
- IS-IS 1
- OSPF 1
- reachable-time statement 1
- usage guidelines 1
- readvertise statement 1
- usage guidelines 1
- realm statement 1
- usage guidelines 1
- receive (tracing flag modifier) 1
- receive routes 1
- receive statement
- RIP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- static routes
- usage guidelines 1
- redirect (tracing flag) 1
- redirected routes 1
- reference-bandwidth statement 1
- IS-IS 1
- usage guidelines 1, 2
- regex-parse (tracing flag) 1
- reject
- firewall filters
- action 1
- reject option to static statement 1
- usage guidelines 1
- remove-private statement 1
- usage guidelines 1
- resolution statement 1
- usage guidelines 1
- resolution-ribs statement 1
- usage guidelines 1
- resolve statement 1
- usage guidelines 1
- resolve-vpn statement 1
- usage guidelines 1
- restart-duration statement 1
- ES-IS 1
- usage guidelines 1
- graceful restart
- usage guidelines 1
- IS-IS 1
- usage guidelines 1
- retain statement 1
- usage guidelines 1, 2
- retransmit-interval statement 1
- usage guidelines 1
- retransmit-timer statement 1
- usage guidelines 1
- rib statement
- BGP 1
- Multitopology Routing
- static routes 1
- route resolution 1
- usage guidelines 1
- routing tables 1
- usage guidelines 1
- rib-group statement 1
- BGP 1
- usage guidelines 1
- IS-IS 1
- OSPF 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- usage guidelines 1
- rib-groups statement 1
- usage guidelines 1
- RIB-groups, static routes 1
- RIP
- authentication 1, 2
- BFD 1
- configuration statements 1
- disable graceful restart 1
- disabling address checks 1
- enabling 1, 2
- graceful restart 1, 2
- groups 1
- hold-down timer 1
- metrics 1, 2
- neighbors 1, 2
- packets 1
- policy, routing 1, 2
- preferences 1, 2, 3
- reserved fields 1
- rib-group messages 1
- rib-group statement
- usage guidelines 1
- route timeout 1
- routing instances, configure multiple 1
- standards documents 1
- tracing operations 1
- UDP, use of 1
- update interval 1
- update messages 1, 2, 3
- rip statement 1
- usage guidelines 1
- RIPng
- configuration statements 1
- disable restart 1
- enabling 1
- graceful restart 1, 2
- groups 1
- holddown timer 1
- metrics 1, 2, 3
- neighbors 1, 2
- overview 1
- packets 1
- policy, routing 1, 2, 3
- preferences 1, 2
- route timeout 1
- standards documents 1
- tracing operations 1
- UDP, use of 1
- update interval 1
- ripng statement 1
- usage guidelines 1
- route
- aggregate statement
- usage guidelines 1
- generate statement
- usage guidelines 1
- static statement 1
- route (tracing flag)
- neighbor discovery 1
- RIPng 1
- routing 1
- route distinguisher 1
- route limit, configuring 1
- paths 1
- prefix 1
- route of last resort See generated routes
- route recording 1
- route resolution 1
- BGP 1
- route statement
- aggregate statement 1
- generate statement 1
- static statement
- usage guidelines 1
- route-distinguisher statement 1
- usage guidelines 1
- route-distinguisher-id statement 1
- usage guidelines 1
- route-record statement 1
- usage guidelines 1
- route-target statement 1
- usage guidelines 1
- route-timeout statement
- RIP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- route-type-community statement 1
- usage guidelines 1
- router advertisements 1, 2, 3, 4
- router discovery
- configuration statements 1
- designated router, configuring 1
- router advertisements 1, 2, 3
- router solicitations 1
- server operation 1
- server, enabling 1, 2
- standards documents 1
- tracing operations 1, 2, 3
- router identifier 1, 2
- router link advertisements 1
- router-advertisement statement 1
- router-discovery (tracing flag) 1
- router-discovery statement 1
- usage guidelines 1
- router-id statement 1
- usage guidelines 1, 2
- routes
- aggregate See aggregate routes
- contributing 1, 2
- static See static routes
- Routing Information Protocol See RIP
- Routing Information Protocol next generation See RIPng
- routing instances
- BGP 1
- configure 1
- IS-IS 1
- configuration example 1
- LDP 1, 2
- MSDP 1
- multiple 1
- router 1
- second router 1
- multiprotocol BGP-based multicast VPNs 1
- OSPF 1, 2
- configuration example 1
- OSPFv3 1
- PIM 1, 2
- policy-based
- auto-export configuration example 1
- instance-import configuration example 1
- RIP 1, 2
- router identifier 1
- routing protocol databases 1
- routing tables 1
- BGP, delays in exchanging routes 1
- creating 1, 2, 3
- default 1
- default unicast 1
- export local routes 1
- flow routes 1
- group 1, 2, 3, 4, 5, 6, 7, 8, 9
- import policy 1
- inet.0 1
- inet.1 1
- inet.2 1, 2
- inet.3 1
- inet6.0 1, 2
- instance-name.inet.0 1
- instance-name.inetflow.0 1
- instance-name.init.0 1
- mpls.0 1
- nonactive routes, exchanging with BGP 1, 2
- overview 1
- policy, routing 1
- primary 1
- secondary 1
- synchronizing 1
- routing-instance (firewall filter action) 1
- routing-instances statement 1
- usage guidelines 1, 2, 3, 4
- routing-options statement 1
- usage guidelines 1
- RSVP
- preferences 1
S
- sample (firewall filter action) 1
- scope statement 1
- usage guidelines 1
- scoping, multicast 1, 2
- secondary import and export policies, configure 1
- secondary routing tables 1
- secondary statement
- OSPF interface 1
- usage guidelines 1
- Secure Neighbor Discovery
- cryptographic addresses
- configuring 1
- cryptographic-address statement 1
- enabling 1
- neighbor-discovery statement 1
- security-level statement 1
- timestamp statement 1
- secure statement 1
- security-level statement 1
- send (tracing flag modifier) 1
- send statement
- RIP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- sham-link statement 1
- usage guidelines 1
- sham-link-remote statement 1
- usage guidelines 1
- shortcuts statement
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- simple-password statement 1
- source-address statement 1
- usage guidelines 1
- source-port (firewall filter match condition) 1
- source-routing statement 1
- usage guidelines 1
- SPF 1, 2
- spf (tracing flag)
- IS-IS 1
- OSPF 1
- spf-options statement
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- SSM
- groups, IGMP 1
- ssm-groups statement 1
- usage guidelines 1
- state (tracing flag)
- neighbor discovery 1
- RIPng 1
- routing protocols 1
- static options
- static routes 1
- static routes 1, 2, 3
- BFD 1, 2
- Multitopology Routing 1
- preferences 1
- static statement 1
- usage guidelines 1
- stub areas 1
- stub statement 1
- usage guidelines 1
- summaries statement 1
- usage guidelines 1
- summary LSA 1
- support, technical See technical support
- synchronizing routing information 1
- syntax conventions 1
- syslog (firewall filter action) 1
- syslog statement
- routing options 1
- usage guidelines 1
- system ID See ISO, system identifier
- system identifier See ISO, system identifier
- system log messages
- routing protocol process 1, 2
T
- tag statement 1
- aggregate routes
- usage guidelines 1
- generated routes
- usage guidelines 1
- static routes
- usage guidelines 1
- task (tracing flag) 1
- neighbor discovery 1
- RIPng 1
- tcp-mss statement 1
- BGP
- usage guidelines 1
- te-metric statement
- IS-IS 1
- OSPF 1
- usage guidelines 1, 2
- technical support
- contacting JTAC 1
- threshold statement 1
- BFD (BGP)
- usage guidelines 1
- BGP 1
- IS-IS 1
- usage guidelines 1
- OSPF
- usage guidelines 1
- RIP
- usage guidelines 1
- usage guidelines 1
- tie-breaker preferences 1
- timer (tracing flag) 1, 2
- neighbor discovery 1
- timers
- OSPF 1
- timestamp statement 1
- topologies statement
- IS-IS 1
- Multitopology Routing 1
- usage guidelines 1
- topology statement
- filter-based forwarding
- Multitopology Routing 1
- usage guidelines 1
- Multitopology Routing 1
- OSPF 1
- OSPF interface 1
- usage guidelines 1
- topology-id statement
- Multitopology Routing 1
- traceoptions
- BFD 1
- traceoptions statement
- BFD 1
- usage guidelines 1
- BGP 1
- usage guidelines 1
- ES-IS 1
- usage guidelines 1
- IS-IS 1
- usage guidelines 1
- neighbor discovery 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
- router discovery 1
- usage guidelines 1
- routing protocols 1
- usage guidelines 1
- Secure Neighbor Discovery 1
- tracing flags
- all 1
- as-path 1
- auth 1
- config-internal 1
- csn 1
- damping 1
- error
- ES-IS 1
- IS-IS 1
- neighbor discovery 1
- OSPF 1
- RIP 1
- RIPng 1, 2
- router discovery 1
- expiration 1
- neighbor discovery 1
- flash 1
- flooding 1
- general 1
- neighbor discovery 1
- RIPng 1
- graceful restart
- IS-IS 1
- OSPF 1
- graceful-restart 1
- hello
- ES-IS 1, 2
- IS-IS 1
- holddown 1, 2
- neighbor discovery 1
- info 1
- keepalive
- BGP 1
- kernel 1
- lsp 1
- lsp-generation 1
- modifiers
- detail 1
- receive 1
- send 1
- normal 1
- neighbor discovery 1
- RIPng 1
- packet-dump 1
- packets
- BGP 1
- IS-IS 1
- neighbor discovery 1
- OSPF 1
- RIP 1
- RIPng 1
- router discovery 1
- parse 1
- policy 1
- neighbor discovery 1
- RIPng 1
- psn 1
- redirect 1
- regex-parse 1
- route
- neighbor discovery 1
- RIPng 1
- routing 1
- router-discovery 1
- spf
- IS-IS 1
- OSPF 1
- state
- neighbor discovery 1
- RIPng 1
- routing protocols 1
- task 1
- neighbor discovery 1
- RIPng 1
- timer 1
- neighbor discovery 1
- RIPng 1
- trigger 1, 2
- neighbor discovery 1
- update
- neighbor discovery 1
- RIP 1
- RIPng 1
- tracing operations
- BGP 1
- ES-IS 1
- IS-IS 1, 2
- neighbor discovery 1
- OSPF 1
- RIP 1, 2
- RIPng 1, 2
- router discovery 1, 2, 3
- routing protocols 1, 2
- traffic engineering database
- OSPF support 1
- traffic-engineering statement
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- OSPF passive TE mode 1
- usage guidelines 1
- transit-delay statement 1
- usage guidelines 1
- transmit-interval statement 1
- BFD 1, 2
- BGP 1
- IS-IS 1
- OSPF
- usage guidelines 1
- trigger (tracing flag) 1, 2
- neighbor discovery 1
- tunnel-type statement 1
- usage guidelines 1
- type statement 1
- usage guidelines 1
- type-7 statement 1
- usage guidelines 1
U
- unicast reverse path check 1
- unicast RPF
- example configuration 1
- fail filters 1
- unicast-reverse-path statement 1
- usage guidelines 1
- unnumbered Ethernet interfaces
- as next-hop interface for static routes 1
- configuration example 1
- update (tracing flag)
- neighbor discovery 1
- RIP 1
- RIPng 1
- update messages
- BGP 1
- update-interval statement
- RIP 1
- usage guidelines 1
- RIPng 1
- usage guidelines 1
V
- valid-lifetime statement 1
- usage guidelines 1
- validation statement
- usage guidelines 1
- version statement
- BFD 1
- usage guidelines 1
- BFD (BGP)
- usage guidelines 1
- BGP 1
- IS-IS 1
- usage guidelines 1
- OSPF 1
- usage guidelines 1
- RIP 1
- usage guidelines 1
- virtual-link statement 1
- usage guidelines 1
- VPLS
- routing instances
- minimum configuration 1
- vpn-apply-export statement 1
- usage guidelines 1
- VRF export policy 1
- VRF table label, configuring 1
- VRF target, configuring 1
- vrf-export statement 1
- usage guidelines 1
- vrf-import statement 1
- usage guidelines 1
- vrf-table-label statement 1
- usage guidelines 1
- vrf-target statement 1
- usage guidelines 1
W
- warning (system logging severity level) 1
- wide-metrics-only statement 1
- usage guidelines 1