reset

Syntax

reset -T target

Release Information

Command supported by JUNOS Release 9.1 and later.

Description

(JCS management module CLI) Reset a specified Routing Engine (blade), JCS switch module, or JCS management module.

Options

-T target—Specify the target of the reset command. Valid targets for this command are:

• system:blade[x]—Specify a Routing Engine as the command target. Replace x with the Routing Engine slot number (1 through 12).
• system:switch[x]—Specify a JCS switch module as the command target. Replace x with the switch number (1 or 2).
• system:mm[x]—Specify a JCS management module as the command target. Replace x with the primary management module number (1 or 2).

Required Privilege Level

supervisor

Related Topics

• Getting Help on JCS Commands

power

List of Sample Output

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output

OK