Downloads
env

env

Syntax

env -T target

Release Information

Command supported by JUNOS Release 9.1 and later.

Description

(JCS management module CLI) Set the persistent environment for commands you enter in the JCS management module. Commands entered during the remainder of the login session apply to this target, unless you specify a new command target.

Options

-T target—Specify the target of the command. Command targets include:

system—JCS1200 platform. This is the default command target.
system:mm[x]—JCS management module. Replace x with a value of 1 or 2.
system:switch[x]—JCS switch module. Replace x with a value of 1 or 2.
system:blade[x]—JCS Routing Engine (blade). Replace x with a value of 1 through 12.
system:power[x]—JCS power supply. Replace x with a value of 1 through 4.
system:blower[x]—JCS fan (blower). Replace x with a value of 1 through 4.
system:mt[x]—JCS media tray. Replace x with a value of 1 or 2.

Required Privilege Level

operator

List of Sample Output

env (JCS Management Module)

Output Fields

When you enter this command, you are provided feedback on the status of your request. The command prompt changes to reflect the new command target.

Sample Output

env (JCS Management Module)

system> env –T system:mm[1]

OK
system:mm[1]>

env