read
Syntax
read -config chassis -T system:mm[x]
Release Information
Command supported by JUNOS Release 9.1 and later.
Description
(JCS management module CLI) Restore the JCS management module configuration from an image previously saved to the JCS chassis with the write command. This command is useful for restoring a backup copy of the JCS management module configuration.
Options
-config chassis—Specify the location from which the configuration is restored.
-T system:mm[x]—Specify the management module as the target of the command (the configuration to be saved). Replace x with a value of 1 or 2.
Required Privilege Level
supervisor
List of Sample Output
readOutput Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
system> read —config chassis –T
system:mm[1]OK Configuration restore from the chassis was successful. Restart the MM for the new settings to take effect.