• Downloads
• reset    

• Related Topics

reset

Syntax

reset -T target

Release Information

Command supported by JUNOS Release 9.1 and later.

Description

(JCS management module CLI) Reset a specified Routing Engine (blade), JCS switch module, or JCS management module.

Options

-T target—Specify the target of the reset command. Valid targets for this command are:

• system:blade[x]—Specify a Routing Engine as the command target. Replace x with the Routing Engine slot number (1 through 12).
• system:switch[x]—Specify a JCS switch module as the command target. Replace x with the switch number (1 or 2).
• system:mm[x]—Specify a JCS management module as the command target. Replace x with the primary management module number (1 or 2).

Required Privilege Level

supervisor

List of Sample Output

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output

OK