- Downloads
- lacp
- Related Topics
- Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between a Virtual Chassis Access Switch and a Virtual Chassis Distribution Switch
- Configuring Aggregated Ethernet LACP (CLI Procedure)
- Configuring Aggregated Ethernet Interfaces (J-Web Procedure)
- Understanding Aggregated Ethernet Interfaces and LACP
- JUNOS Software Network Interfaces Configuration Guide at https://www.juniper.net/techpubs/software/junos/junos95/index.html
lacp
Syntax
- lacp mode {
- periodic interval;
- }
Hierarchy Level
- [edit interfaces aex aggregated-ether-options]
Release Information
Statement introduced in JUNOS Release 9.0 for EX Series switches.
Description
Configure the Link Aggregation Control Protocol (LACP).
Default
LACP is not enabled.
Options
-
mode —LACP mode:
- active—Initiate transmission of LACP packets
- passive—Respond to LACP packets
-
The remaining statement is explained separately.
Required Privilege Level
interface—To view this statement in the
configuration.
interface-control—To add this
statement to the configuration.