• Downloads
• Setting the none Action on an Interface to Override a MAC Limit Applied to All Interfaces (CLI Procedure)    

• Related Topics
• Configuring MAC Limiting (CLI Procedure)
• Configuring MAC Limiting (J-Web Procedure)
• Example: Configuring Port Security, with DHCP Snooping, DAI, MAC Limiting, and MAC Move Limiting, on an EX Series Switch
• Verifying That MAC Limiting Is Working Correctly

Setting the none Action on an Interface to Override a MAC Limit Applied to All Interfaces (CLI Procedure)

If you set a MAC limit in your port security settings to apply to all interfaces on the EX Series switch, you can override that setting for a particular interface by specifying action none.

To use the none action to override a MAC limit setting:

1. Set the MAC limit—for example, a limit of 5 with action drop:
   
   

   [edit ethernet-switching-options secure-access-port]
user@switch# set interface all mac-limit 5 action drop

   
   
2. Then change the action for one interface (here, ge-0/0/2) with this command. You don't need to specify a limit value.
   
   

   [edit ethernet-switching-options secure-access-port]
user@switch# set interface ge–0/0/2 mac-limit action none