[an error occurred while processing this directive] [an error occurred while processing this directive]

Displaying Inter-PSD Forwarding Information

Purpose

Display information about inter-PSD forwarding.

Action

Using the show interfaces xt-fpc/pic/slot command, display logical interfaces configured on the cross-connect interface. In the following example, the interface type is Inter-PSD-tunnel and there is one logical interface (xt-5/0/0.1).


user@psd2> show interfaces xt-5/0/0 
Physical interface: xt-5/0/0, Enabled, Physical link is Up 
  Interface index: 136, SNMP ifIndex: 644 
  Type: Inter-PSD-tunnel, Link-level type: Inter-PSD-tunnel, MTU: Unlimited, 
  Speed: 12800mbps 
  Device flags   : Present Running 
  Interface flags: Point-To-Point SNMP-Traps 
  Link type      : Full-Duplex 
  Link flags     : None 
  Physical info  : 13 
  Last flapped   : 2009-01-30 18:24:07 PST (19:14:07 ago) 
  Input rate     : 0 bps (0 pps) 
  Output rate    : 67128 bps (116 pps) 

  Logical interface xt-5/0/0.1 (Index 71) (SNMP ifIndex 645)  
    Flags: Point-To-Point SNMP-Traps 0x4000 DLCI 1 Encapsulation: FR-NLPID 
    Input packets : 0  
    Output packets: 7841 
    Protocol inet, MTU: Unlimited 
      Addresses, Flags: Is-Preferred Is-Primary 
        Destination: 10.0.0.2, Local: 10.0.0.1

Published: 2009-07-23

[an error occurred while processing this directive]