Management Port Connector Pinouts for the QFX Series
The 1000BASE-T RJ-45 management ports use an RJ-45 connector to connect either to the control plane and management network in a QFabric system, or to a management device for out-of-band management.
Table 1 provides the pinout information of the RJ-45 management port connector. An RJ-45 cable is supplied with the QFX Series device.
The RJ-45 pinout information in Table 1 also applies to the QFX5100-48T device 10GBASE-T access ports.
Table 1: RJ-45 Management Port Connector Pinouts for the QFX Series
Pin | Signal | Description |
|---|---|---|
1 | TRP1+ | Transmit/receive data pair 1 |
2 | TRP1– | Transmit/receive data pair 1 |
3 | TRP2+ | Transmit/receive data pair 2 |
4 | TRP3+ | Transmit/receive data pair 3 |
5 | TRP3– | Transmit/receive data pair 3 |
6 | TRP2– | Transmit/receive data pair 2 |
7 | TRP4+ | Transmit/receive data pair 4 |
8 | TRP4– | Transmit/receive data pair 4 |
