Symbols Numbers A B C D E F G H I J K L M N O P Q R S T U V W X Y
Symbols
- ? command
- for CLI online help 1
- in configuration mode 1
- in operational mode 1
- ? icon (J-Web) 1
- /cf/var/crash 1
- /cf/var/log 1
- /cf/var/tmp 1
- ( ), in syntax descriptions 1
- [ ], in configuration statements 1
- { }, in configuration statements 1
- *,G notation, for multicast forwarding states 1
- * (red asterisk) 1
- #, configuration mode command prompt 1
- #, in configuration statements 1
- < >, in syntax descriptions 1
- >, operational mode command prompt 1
- | (pipe), in syntax descriptions 1
- | (pipe) command 1
- lug 1
Numbers
- 10/100Base-TX ports 1
A
- ABRs 1
- access privileges
- denying and allowing commands 1
- permission bits for 1
- predefined 1
- specifying (Quick Configuration) 1
- accident, steps to take 1
- accounts 1
- AC plug types 1
- AC power 1
- AC power cords
- electrical specifications 1
- physical requirements 1
- plug types 1
- replacing (J2300 or J4300) 1
- replacing (J6300) 1
- action modifiers 1, 2
- actions
- default, routing policy 1
- final, routing policy 1
- NAT 1
- route list match types 1
- routing policy 1
- routing policy, summary of 1
- stateful firewall filters 1
- stateless firewall filters 1
- active routes
- displaying 1
- versus passive routes 1
- ad0 1
- ad2 1
- Add a RADIUS Server page 1
- Add a TACACS+ Server page 1
- Add a User Quick Configuration page 1
- Add button 1
- Add new entry link 1
- addresses
- 192.168.1.1/24 1
- attacking, displaying with IDS 1
- BGP external peer address (configuration editor) 1
- BGP internal peer address (configuration editor) 1
- BGP local address (Quick Configuration) 1
- BGP peer address (Quick Configuration) 1
- destination, displaying 1
- fe-0/0/0 for autoinstallation 1
- loopback 1
- management interface 1
- multicast ranges 1
- translating 1
- under attack, displaying with IDS 1
- address match conditions 1
- address translation 1
- administrative scoping 1
- advertisements 1
- AF 1
- agency approvals 1
- agents, SNMP 1
- aggregation, route 1
- airflow
- J2300 1
- J4300 and J6300 1
- space requirement 1
- ALARM LED 1, 2
- alarms
- active, displaying 1
- ALARM LED 1
- conditions, chassis 1
- displaying 1
- red, PIMs 1
- red, Routing Engine 1
- severity, displaying 1
- yellow, primary compact flash 1
- yellow, Routing Engine 1
- alert logging severity 1
- alternate mark inversion 1
- alternative boot media 1
- altitude requirement 1
- ambient temperature 1
- AMI (alternate mark inversion)
- E1 1
- T1 1
- antistatic mat 1
- any level statement 1
- any logging facility 1
- Apply button 1
- approvals, agency 1
- archiving system logs 1
- area border routers
- adding interfaces 1
- area ID (configuration editor) 1
- backbone area 1
- backbone area interface 1
- description 1
- areas 1
- arithmetic operators 1
- AS path
- description 1
- displaying 1
- forcing by MED 1
- prepending 1
- role in route selection 1
- ASs (autonomous systems)
- area border routers 1
- AS number (Quick Configuration) 1
- breaking into confederations 1
- description 1
- group AS number (configuration editor) 1
- individual AS number (configuration editor) 1
- sample BGP confederation 1
- stub areas 1
- sub-AS number 1
- AS number (configuration editor) 1
- assured forwarding 1
- attacks, detecting with IDS 1
- authentication
- adding a RADIUS server (Quick Configuration) 1
- adding a TACACS+ server (Quick Configuration) 1
- local password, by default 1
- login classes 1, 2
- methods 1, 2
- order of user authentication (configuration editor) 1
- OSPF, MD5 1
- OSPF, plain-text passwords 1
- RADIUS authentication (configuration editor) 1
- RIPv2, MD5 1
- RIPv2, plain-text passwords 1
- specifying access privileges (Quick Configuration) 1
- specifying a method (Quick Configuration) 1
- TACACS+ authentication (configuration editor) 1
- user accounts 1, 2
- authorization logging facility 1
- autoinstallation
- description 1
- enabling (CLI) 1
- for service providers 1
- overview 1
- requirements for end users 1
- Auto-RP 1
B
- backbone area
- area ID (configuration editor) 1
- area ID (Quick Configuration) 1
- area type (Quick Configuration) 1
- configuring 1
- description 1
- interface 1
- backup compact flash, removing 1
- backup router 1
- BA classifiers 1
- basic connectivity
- CLI configuration editor 1
- establishing 1
- J-Web configuration editor 1
- Quick Configuration 1
- requirements 1
- sample configuration 1
- verifying 1
- battery handling 1
- behavior aggregate classifiers 1
- best-effort service 1
- BGP (Border Gateway Protocol)
- AS path 1
- confederations 1
- enabling (Quick Configuration) 1
- external (EBGP) 1
- external neighbor (peer) address (configuration editor) 1
- full mesh requirement 1, 2
- injecting OSPF routes into BGP 1
- internal (IBGP) 1
- internal neighbor (peer) address (configuration editor) 1
- license, route reflectors 1
- local address (Quick Configuration) 1
- local preference 1
- MED metric 1
- origin value 1
- overview 1, 2
- peer address (Quick Configuration) 1
- peering sessions 1
- point-to-point internal peer session (configuration editor) 1
- point-to-point peer session (configuration editor) 1
- policy to make routes less preferable 1
- Quick Configuration 1
- requirements 1
- route reflectors 1
- route selection process 1
- routing policy (configuration editor) 1
- sample BGP peer network 1
- sample confederation 1
- sample full mesh 1
- sample route reflector 1
- scaling techniques 1
- session establishment 1
- session maintenance 1
- statistics 1
- status 1
- verifying BGP configuration 1
- verifying BGP groups 1
- verifying BGP peers (neighbors) 1
- verifying peer reachability 1
- AS number (Quick Configuration) 1
- peer AS number (Quick Configuration) 1
- router ID (Quick Configuration) 1
- route-flap damping 1
- external group type (configuration editor) 1
- internal group type (configuration editor) 1
- monitoring 1
- BGP confederations
- confederation number 1
- creating (configuration editor) 1
- description 1, 2
- route-flap damping 1
- sample network 1
- sub-AS number 1
- confederation members 1
- BGP groups
- cluster identifier (configuration editor) 1
- confederations (configuration editor) 1
- displaying 1
- external, creating (configuration editor) 1
- external group type (configuration editor) 1
- internal group type (configuration editor) 1
- verifying 1
- group AS number (configuration editor) 1
- internal, creating (configuration editor) 1
- internal, creating for a route reflector (configuration editor) 1
- BGP messages
- to establish sessions 1
- update, to maintain sessions 1
- BGP neighbors 1
- BGP page 1
- BGP peers
- directing traffic by local preference 1
- displaying 1, 2
- external (configuration editor) 1
- internal, sample full mesh 1
- internal, sample route reflector 1
- internal (configuration editor) 1
- peer address (Quick Configuration) 1
- peer AS number (Quick Configuration) 1
- point-to-point connections 1
- routing policy (configuration editor) 1
- sample peer network 1
- sessions between 1
- verifying 1, 2
- verifying reachability 1
- BGP route reflectors
- cluster of clusters 1
- creating (configuration editor) 1
- description 1, 2
- group type (configuration editor) 1
- license 1
- multiple clusters 1
- sample IBGP network 1
- cluster (configuration editor) 1
- cluster identifier (configuration editor) 1
- BGP sessions
- configured at both ends 1
- establishment 1
- maintenance 1
- point-to-point external (configuration editor) 1
- point-to-point internal (configuration editor) 1
- sample peering session 1
- status 1
- types 1
- binary operators 1
- bit-field logical operators
- stateless firewall filters 1
- bit-field match conditions 1
- bit-field synonym match conditions 1
- blank panel
- for empty PIM slot 1
- for power supply (J6300) 1
- blinking
- configuration LED state 1
- LAN port LED state 1
- POWER ON LED state 1
- boot devices 1
- boot process, backup router for 1
- boot sequence
- J2300 1
- J2400 1
- J6300 1
- Bootstrap Router 1
- Border Gateway Protocol 1
- bottom pane 1
- braces, in configuration statements 1
- brackets
- angle, in syntax descriptions 1
- square, in configuration statements 1
- branches 1
- browser interface 1
- BSR (Bootstrap Router) 1
- BTUs per hour 1
- buttons 1
- bytes transmitted 1
C
- cables
- arranging for safety 1
- connecting to network media 1
- console port, connecting 1
- console port, DB–9 connector pinouts 1
- console port, replacing 1
- disconnecting PIM cables 1
- disconnecting the power cord (J2300 or J4300) 1
- E1 RJ-48 pinouts 1
- Ethernet, connecting 1
- Ethernet, RJ-45 connector pinouts 1
- Ethernet rollover, connecting 1
- Ethernet rollover, replacing 1
- grounding 1
- PIM, installing 1
- PIM, removing 1
- power cord, replacing (J2300 or J4300) 1
- power cord, replacing (J6300) 1
- power cord specifications 1
- reducing radio frequency interference (RFI) 1
- serial EIA-530A DCE pinouts 1
- serial EIA-530A DTE pinouts 1
- serial PIM specifications 1
- serial RS-232 DCE pinouts 1
- serial RS-232 DTE pinouts 1
- serial RS-422/449 (EIA-449) DCE pinouts 1
- serial RS-422/449 (EIA-449) DTE pinouts 1
- serial V.35 DCE pinouts 1
- serial V.35 DTE pinouts 1
- serial X.21 DCE pinouts 1
- serial X.21 DTE pinouts 1
- T1 cable length 1
- T1 RJ-48 pinouts 1
- T3 cable length 1
- Cancel button
- J-Web configuration editor 1
- Quick Configuration 1
- canceling a commit 1, 2
- case number, for JTAC 1
- C-bit parity 1
- Challenge Handshake Authentication Protocol 1
- change-log logging facility 1
- channel number, in interface name 1
- CHAP (Challenge Handshake Authentication Protocol)
- enabling on E1 1
- enabling on serial interfaces 1
- enabling on T1 1
- enabling on T3 1
- E1 local identity 1
- serial interface local identity 1
- T1 local identity 1
- T3 local identity 1
- CHAP secret 1
- chassid process 1
- chassis
- alarm conditions and remedies 1, 2
- alarms, displaying 1
- component part numbers 1
- component serial number labels 1
- component serial numbers 1
- environment, displaying 1
- grounding 1
- identifiers, displaying 1
- J2300 1
- J4300 1
- J6300 1
- lifting guidelines 1
- monitoring 1
- temperature, displaying 1
- chassis software process 1
- checklist for site preparation 1
- checksum
- E1 frame 1
- T1 frame 1
- T3 frame 1
- classifiers
- applying BA classifiers 1, 2
- default BA classifiers 1
- description 1
- sample, for firewall filter 1
- sample BA classification 1
- sample BA classifier assignments 1
- class of service 1
- cleaning up files 1
- Clean Up Files page 1
- clear system commit command 1
- clear-text access 1
- clickable configuration 1
- CLI configuration editor 1
- clocking
- E1 1
- serial interface 1
- T1 1
- T3 1
- clock rate, serial interface 1
- clusters 1
- command completion
- description 1
- setting on and off 1
- command hierarchy 1
- command-line interface 1
- command prompts
- changing 1
- configuration mode (#) 1
- operational mode (>) 1
- comments, in configuration statements 1
- commit and-quit command 1
- commit at command 1
- Commit button 1
- commit check command 1
- commit command 1
- commit confirmed command 1
- committed configuration
- activating (CLI configuration editor) 1
- comparing two configurations 1
- confirming (CLI configuration editor) 1
- description 1
- J-Web configuration editor display 1
- replacing (CLI configuration editor) 1
- rescue configuration (CLI configuration editor) 1
- rescue configuration (J-Web) 1
- scheduling (CLI configuration editor) 1
- summaries 1
- verifying (CLI configuration editor) 1
- viewing previous (CLI configuration editor) 1
- canceling a commit (CLI configuration editor) 1
- methods 1
- storage location 1
- communities, SNMP 1
- compact flash
- backup , removing 1
- configuring 1
- configuring for failure snapshot storage 1
- copying a boot image with Cygwin 1
- copying a boot image with UNIX 1
- displaying size 1
- primary, description 1
- primary, installing 1
- primary, removing 1
- removable, description 1
- removable, installing 1
- removable, J4300 and J6300 1
- removable, LED states 1
- removable, removing 1
- displaying usage 1
- primary, yellow alarm 1
- compliance
- EMC requirements 1
- general standards 1
- components
- packing for shipment 1
- part numbers 1
- replacing 1
- serial number label 1
- serial numbers 1
- shipped 1
- troubleshooting 1
- confederations 1
- CONFIG button
- 15–second caution 1
- for factory configuration 1
- for rescue configuration 1
- configuration
- activating (CLI configuration editor) 1
- adding a statement (CLI configuration editor) 1
- basic 1
- changing part of a file (CLI configuration editor) 1
- CLI commands 1
- CLI configuration mode 1
- committed 1
- committing (CLI configuration editor) 1
- committing (J-Web) 1
- committing as a text file, with caution (J-Web) 1
- confirming (CLI configuration editor) 1
- copying a statement 1
- deactivating a statement 1
- deleting a statement 1
- discarding changes (J-Web) 1
- downgrading (CLI) 1
- downgrading (J-Web) 1
- downloading (J-Web) 1
- editing (J-Web) 1, 2
- editing as a text file, with caution (J-Web) 1
- factory, committing with the CONFIG button 1
- history 1
- inserting an identifier 1
- interfaces, displaying 1
- J-Web options 1
- loading new (CLI configuration editor) 1
- loading previous (CLI configuration editor) 1
- loading previous (J-Web) 1
- locked, with the configure exclusive command 1
- managing files (CLI configuration editor) 1
- managing files (J-Web) 1
- merging (CLI configuration editor) 1
- modifying (CLI configuration editor) 1
- modifying a statement (CLI configuration editor) 1
- overriding (CLI configuration editor) 1
- renaming an identifier 1
- replacing configuration statements (CLI configuration editor) 1
- requirements 1
- rescuing (CLI configuration editor) 1
- rescuing (J-Web) 1
- rollback (CLI configuration editor) 1
- rollback (J-Web) 1
- saving (CLI configuration editor) 1
- upgrading (CLI) 1
- upgrading (J-Web) 1
- uploading (J-Web) 1
- users-editors, viewing 1
- verifying (CLI configuration editor) 1
- viewing as a text file (J-Web) 1
- configuration database
- displaying size 1
- summary 1
- configuration editor 1
- configuration hierarchy
- J-Web display 1
- navigating 1
- configuration history
- comparing files 1
- database summary 1
- displaying 1
- downloading files 1
- summary 1
- users-editors, viewing 1
- Configuration History page 1
- configuration LED states 1
- configuration mode 1,
- commands 1
- entering and exiting 1
- prompt (#) 1
- using show commands in 1
- 1
- configuration text
- editing and committing, with caution 1
- viewing 1
- configuration tools 1
- configure command 1
- configure exclusive command 1
- Configure link 1
- configure private command 1
- Confirm File Delete page 1
- confirming a configuration 1
- congestion control, with DiffServ assured forwarding 1
- connection
- network cables 1
- power 1
- connectivity
- bidirectional (BGP) 1
- bidirectional (OSPF) 1
- hardware 1
- through J-Web 1
- through the CLI 1
- unidirectional (RIP) 1
- console port
- connecting through the CLI 1
- DB–9 connector pinouts 1
- description 1
- replacing the cable 1
- adapter 1
- settings 1
- container statements 1
- controlling user access 1
- conventions
- for interface names 1
- how to use this guide 1
- notice icons 1
- text and syntax 1
- cooling system
- airflow requirement 1
- J2300 1
- J4300 1
- J6300 1
- copy command 1
- cords 1
- CoS (class of service)
- assigning forwarding classes to output queues 1
- BA classifiers 1
- configuration tasks 1
- default BA classifiers 1
- default forwarding class queue assignments 1
- default scheduler settings 1
- DiffServ benefits 1
- DSCP rewrites 1
- DSCPs 1
- firewall filter for a multifield classifier 1
- JUNOS components 1
- JUNOS implementation 1
- policer for firewall filter 1
- preparation 1
- RED drop profiles 1
- rewrite rules 1
- sample BA classification 1
- scheduler maps 1
- schedulers 1
- uses 1
- verifying multicast session announcements 1
- virtual channels for rules 1
- cost, of a network path 1
- CPU usage, displaying 1
- crash files
- cleaning up (J-Web) 1
- displaying size 1
- downloading (J-Web) 1
- critical logging severity 1
- cron logging facility 1
- curly braces, in configuration statements 1
- customer support 1
- Cygwin environment 1
D
- daemon logging facility 1
- daemons 1
- Database Information page 1
- data inversion
- E1 1
- T1 1
- DB–9 connector pinouts 1
- deactivate command 1
- deactivating configuration statements or identifiers 1
- debug logging severity 1
- default gateway 1
- defaults
- BA classifiers 1
- CoS forwarding class assignments 1, 2
- junos-algs-outbound group, stateful firewall filters 1
- routing policy actions 1
- setting for static routes 1
- Delete button 1
- delete command 1
- Delete Configuration Below This Point radio button 1
- deleting
- crash files (J-Web) 1
- files, with caution 1
- log files (J-Web) 1
- network interfaces 1
- temporary files (J-Web) 1
- licenses (CLI) 1
- licenses (J-Web) 1
- denial-of-service attacks, preventing 1, 2
- dense routing mode, caution for use 1
- designated router (OSPF)
- controlling election 1
- description 1
- desk installation (J2300 only) 1
- destination address, displaying 1
- DHCP (Dynamic Host Configuration Protocol) 1
- DHCP server
- after initial configuration 1
- before initial configuration 1
- maintaining after initial setup 1
- diagnosis
- CLI command summary 1
- displaying firewall filter configurations 1, 2
- displaying firewall filter statistics 1, 2
- displaying static routes in the routing table 1
- hardware 1
- interfaces 1
- J-Web tools overview 1
- multicast paths 1
- network traffic 1
- ping command 1
- ping host (J-Web) 1
- preparation 1
- system operation 1
- traceroute (J-Web) 1
- traceroute command 1
- verifying BGP configuration 1
- verifying BGP groups 1
- verifying BGP peer reachability 1
- verifying BGP peers (neighbors) 1, 2
- verifying firewall filter actions 1, 2
- verifying firewall filter DoS protection 1, 2
- verifying firewall filter flood protection 1, 2
- verifying firewall filter handles fragments 1, 2
- verifying firewall filters with packet logs 1, 2
- verifying IPSec tunnel operation 1
- verifying multicast IGMP versions 1
- verifying multicast SAP and SDP configuration 1
- verifying OSPF-enabled interfaces 1
- verifying OSPF host reachability 1
- verifying OSPF neighbors 1
- verifying OSPF routes 1
- verifying PIM mode and interface configuration 1
- verifying PIM RPF routing table 1
- verifying PIM RPs 1
- verifying RIP-enabled interfaces 1
- verifying RIP host reachability 1
- verifying stateful firewall filters 1, 2
- diagnostic commands 1
- Differentiated Services 1
- DiffServ (Differentiated Services)
- assigning forwarding classes to output queues 1
- assured forwarding 1
- BA classifiers 1
- benefits for CoS 1
- code points 1
- configuration tasks 1
- default BA classifiers 1
- default forwarding class queue assignments 1
- default scheduler settings 1
- DSCP rewrites 1
- firewall filter for a multifield classifier 1
- forwarding service classes 1
- interoperability 1
- JUNOS implementation 1
- policer for firewall filter 1
- preparation 1
- RED drop profiles 1
- rewrite rules 1
- sample BA classification 1
- scheduler maps 1
- schedulers 1
- uses 1
- virtual channels for rules 1
- digital certificate, for encrypted access 1
- disabling system logs 1
- Discard All Changes radio button 1
- Discard button 1
- Discard Changes Below This Point radio button 1
- discarded packets 1
- discarding configuration changes 1
- discard rule
- stateful firewall filters 1
- stateless firewall filters 1
- Distance Vector Multicast Routing Protocol 1
- distance-vector routing protocols 1
- DNS (Domain Name System) 1
- DNS server
- address, displaying 1
- defining (Quick Configuration) 1
- function 1
- defining (configuration editor) 1
- documentation set
- comments on 1
- domain name 1, 2
- Domain Name System 1
- domain search
- defining (Quick Configuration) 1
- defining (configuration editor) 1
- DoS (denial-of-service) attacks, preventing 1, 2
- downgrading
- with J-Web 1
- with the CLI 1
- downloading
- configuration files (J-Web) 1
- crash files (J-Web) 1
- log files (J-Web) 1
- software upgrades 1
- temporary files (J-Web) 1
- licenses (J-Web) 1
- download URL 1
- downstream interfaces 1
- DRAM modules
- installing 1
- removing 1
- dropped packets 1
- dry chemical fire extinguishers, prohibited 1
- DS3 ports 1
- DSCPs (DiffServ code points)
- corresponding forwarding service classes 1
- default forwarding class queue assignments 1
- description 1
- replacing with rewrite rules 1
- rewrites 1
- sample BA classification 1
- DVMRP (Distance Vector Multicast Routing Protocol) 1
- Dynamic Host Configuration Protocol 1
- dynamic routing 1
E
- E1 ports
- CHAP 1
- clocking 1
- configuring 1
- data inversion 1
- encapsulation type 1
- fractional, channel number 1
- frame checksum 1
- framing 1
- logical interfaces 1
- RJ-48 cable pinouts 1
- time slots 1
- license 1
- MTU 1
- earth ground 1
- earthquakes
- rack-mount requirements 1
- seismic requirements 1
- EBGP (external BGP)
- description 1
- route-flap damping 1
- sample network 1
- edit command 1
- Edit Configuration page 1
- Edit Configuration Text page 1
- Edit link 1
- EGPs 1
- EIA-530A DCE cable pinouts 1
- EIA-530A DTE cable pinouts 1
- electricity
- safety warnings 1
- wiring guidelines 1
- electromagnetic compatibility (EMC)
- compliance with requirements 1
- preventing problems with 1
- standards 1
- electromagnetic interference (EMI)
- compliance with requirements 1
- standards 1
- suppressing 1
- electrostatic bag, for storing components 1
- electrostatic discharge, preventing 1
- EMC
- compliance with requirements 1
- preventing problems with 1
- standards 1
- emergency logging severity 1
- EMI
- compliance with requirements 1
- standards 1
- suppressing 1
- encapsulation type
- E1 1
- serial interfaces 1
- T1 1
- T3 1
- encrypted access through SSH 1
- end-user requirements, for autoinstallation 1
- environment, CLI
- displaying 1
- setting 1
- environmental requirements for operation 1
- EPROM 1, 2
- error logging severity 1
- ESD (electrostatic discharge), preventing 1
- ESD wrist strap
- verifying resistance, for safety 1
- wearing during installation 1, 2
- Ethernet cable
- connecting the Services Router to a management device 1
- RJ-45 connector pinouts 1
- Ethernet rollover cable
- DB–9 connector pinouts 1
- replacing 1
- connecting the Services Router to a management device 1
- exact route list match type 1
- exit command 1,
- to navigate the configuration hierarchy 1
- 1
- exit configuration-mode command 1
- export statement, for routing policies 1
- exterior gateway protocols (EGPs) 1
- external BGP 1
F
- facility none statement 1
- factory configuration, committing with the CONFIG button 1
- failures
- PIM 1
- Routing Engine fan 1
- fans
- J2300 1
- J4300 1
- J6300 1
- Fast Ethernet ports
- configuring 1
- J2300 1
- J4300 1
- J6300 1
- LED states 1, 2
- PORT 0 1
- PORT 0, connecting through J-Web 1
- license, for PIM ports 1
- logical interfaces 1
- no license required for LAN ports 1
- fe-0/0/0 1, 2
- fe-0/0/1 1, 2
- feature licenses 1
- feature overview 1
- features, licensed, displaying 1
- field-replaceable units, replacing 1
- file management
- configuration files (CLI configuration editor) 1
- configuration files (J-Web) 1
- crash files (J-Web) 1
- log files (J-Web) 1
- temporary files (J-Web) 1
- filtering command output 1
- fire extinguishers
- prohibited 1
- required 1
- fire safety requirements 1
- fire suppression
- equipment required 1
- shutdown requirement 1
- Firewall/NAT application page 1, 2
- Firewall/NAT page 1, 2
- firewall filters
- applying CoS rules to logical interfaces 1
- displaying configurations 1, 2
- displaying statistics 1, 2
- multifield classifier filter terms 1
- overview 1
- policer for 1
- sample classifier terms 1
- stateful firewall filters 1
- stateless firewall filters 1
- term number caution 1
- verifying configuration 1, 2
- verifying flood protection 1, 2
- verifying fragment handling 1, 2
- verifying packet logging 1, 2
- flap damping 1
- flapping 1
- Flexible PIM Concentrator 1
- flooding, preventing 1, 2
- flow control actions, routing policies 1
- font conventions 1
- forwarding classes
- assigning to output queues 1
- default queue assignments 1
- description 1
- mapping to schedulers 1
- policy to group source and destination prefixes 1
- sample BA classification 1
- sample mappings 1
- forwarding policy options
- description 1
- forwarding software process 1
- forwarding states, multicast notation 1
- forwarding table
- controlling OSPF routes in 1
- controlling static routes in 1, 2
- description 1
- MED to determine routes in 1
- FPC (Flexible PIM Concentrator)
- temperature 1
- number in interface name 1
- framing
- E1 1
- T1 1
- T3 1
- framing errors 1
- from statement, routing policy match conditions 1
- front panel
- J2300 1
- J4300 1
- J6300 1
- FRUs (field-replaceable units)
- PIMs, installing 1
- PIMs, removing 1
- replacing 1
- full mesh requirement
- description 1
- fulfilling with confederations 1
- fulfilling with route reflectors 1
- sample network 1
- fwdd process 1
G
- gateway
- default 1
- local and remote, for IPSec service sets 1
- get requests 1
- glossary
- basic connectivity 1
- configuration 1
- CoS 1
- diagnostic 1
- firewall filters 1
- monitoring 1
- multicast 1
- network interfaces 1
- routing 1
- routing policies 1
- system management 1
- graceful shutdown 1
- graphical user interface 1
- grounding
- cable 1
- chassis 1
- connection 1
- equipment warning 1
- grounding lug
- connecting 1
- specifications 1
- groups
- BGP 1
- default junos-algs-outbound group, for stateful firewall filters 1
- for SNMP traps 1
- OSPF areas 1
- RIP routers 1
- GUI 1
H
- halt immediately
- with J-Web 1
- with the CLI 1
- halting
- with J-Web 1
- with the CLI 1
- handling packet fragments 1, 2
- hardware
- installation and connection 1
- maintenance 1
- replacing components 1
- returning 1
- troubleshooting components 1
- version, displaying 1
- hardware features 1
- help
- JUNOS CLI 1
- J-Web interface 1
- help icon (?) 1
- help reference command 1
- help topic command 1
- hierarchy 1
- History 1
- hold time, to maintain a session 1
- hop count 1
- hostname 1, 2
- host reachability
- ping command 1
- ping host (J-Web) 1
- verifying for an OSPF network 1
- verifying for a RIP network 1
- how to use this guide 1
- humidity requirement 1
- Hyperterminal, for terminal emulation 1
I
- IBGP (internal BGP)
- description 1
- full mesh (configuration editor) 1
- full mesh requirement 1
- sample network 1
- sample route reflector 1
- ICMP (Internet Control Message Protocol) policers 1, 2
- ICMP policers 1, 2
- identifier link 1
- identifiers, configuration
- adding or modifying 1
- deactivating 1
- deleting 1
- inserting 1
- renaming 1
- idle time
- displaying 1
- setting for a CLI session 1
- IDS (intrusion detection service)
- information, displaying 1
- search-narrowing characteristics 1
- monitoring 1
- ifd process 1
- IGMP (Internet Group Management Protocol)
- IGMPv2 1
- IGMPv3 1
- setting the version 1
- IGMPv1 1
- IGMP (Internet Group Membership Protocol)
- verifying the version 1
- IGPs 1
- IKE (Internet Key Exchange)
- description 1
- preshared key (configuration editor) 1
- preshared key (Quick Configuration) 1
- immunity standards 1
- import statement, for routing policies 1
- incoming metric (RIP), modifying 1
- inet routing table 1
- info logging severity 1
- initial configuration requirements 1
- injecting routes 1
- injury, steps to take 1
- insert command 1
- inserting configuration identifiers 1
- installation
- desk (J2300 only) 1
- DRAM modules 1
- initial 1
- PIM cables 1
- PIMs 1
- power supplies (J6300) 1
- preparation 1
- primary compact flash 1
- rack 1
- removable compact flash 1
- requirements 1
- safety guidelines and warnings 1
- site checklist 1
- site guidelines 1
- software upgrades, from a remote server (Quick Configuration) 1
- software upgrades, uploading (Quick Configuration) 1
- software upgrades (CLI) 1
- tools and equipment 1
- USB drive 1
- wall (J2300 only) 1
- licenses (CLI) 1
- licenses (J-Web) 1
- Install Remote page 1
- interactive-commands logging facility 1
- interface naming conventions 1
- interfaces 1
- interface software process 1
- Interfaces page 1
- interior gateway protocols (IGPs) 1
- internal BGP 1
- Internet Group Management Protocol 1
- Internet Key Exchange 1
- Internet routing, with BGP 1
- intrusion detection service 1
- IN USE LED states 1
- invalid configuration, replacing
- with J-Web 1
- with the CLI configuration editor 1
- invalid routes, rejecting 1
- IPSec (IP Security)
- IKE 1
- monitoring 1
- security associations 1
- statistics 1
- tunnels 1
- verifying tunnels 1
- VPN license 1
- IPSec security associations 1
- IPSec tunnels
- displaying 1
- IKE key (configuration editor) 1
- IKE key (Quick Configuration) 1
- incoming traffic filters 1
- IPSec rule (configuration editor) 1
- local endpoint (Quick Configuration) 1
- NAT pools (configuration editor) 1
- outgoing traffic filters 1
- overview 1
- private addresses (Quick Configuration) 1
- Quick Configuration 1
- remote endpoint (Quick Configuration) 1
- requirements 1
- services interfaces (configuration editor) 1
- services sets (configuration editor) 1
- stateful firewall filter (configuration editor) 1
- verifying 1
- IPSec Tunnels page 1
- IP Security 1
J
- J2300
- boot devices 1
- boot sequence 1
- chassis 1
- components shipped 1
- cooling system 1
- electrical specifications 1
- fans 1
- feature overview 1
- front panel 1
- hardware 1
- hardware components 1
- installation 1
- physical specifications 1
- PIM 1
- power cord, replacing 1
- power system 1
- Routing Engine 1
- USB port 1
- J4300
- boot devices 1
- boot sequence 1
- chassis 1
- components shipped 1
- cooling system 1
- electrical specifications 1
- fans 1
- feature overview 1
- front panel 1
- hardware 1
- hardware components 1
- installation 1
- physical specifications 1
- PIM 1
- power cord, replacing 1
- power system 1
- removable compact flash 1
- Routing Engine 1
- USB port 1
- J6300
- boot devices 1
- boot sequence 1
- chassis 1
- components shipped 1
- cooling system 1
- electrical specifications 1
- fans 1
- feature overview 1
- front panel 1
- hardware 1
- hardware components 1
- installation 1
- physical specifications 1
- PIM 1
- power cord, replacing 1
- power supplies 1
- removable compact flash 1
- Routing Engine 1
- USB port 1
- J-Flow license 1
- J-series
- BGP routing 1
- configuration tools 1
- CoS overview 1
- CoS with DiffServ 1
- establishing software connectivity 1
- feature summary 1
- firewall filter overview 1
- firewall filters 1
- hardware 1
- hardware replacement 1
- hardware return 1
- installation and connection 1
- IPSec tunnels 1
- JUNOS Internet software overview 1
- licenses 1
- managing users and operations 1
- models available 1
- monitoring and diagnosis 1
- multicast 1
- multicast overview 1
- NAT 1
- network cables and connectors 1
- network interfaces 1
- network management 1
- OSPF routing 1
- release notes, URL 1
- RIP routing 1
- routing policies 1
- routing policy overview 1
- routing protocols overview 1
- safety and compliance 1
- site preparation 1
- software upgrades 1
- static routing 1
- user interfaces 1, 2
- VPNs 1
- JTAC (Juniper Networks Technical Assistance Center)
- contacting 1
- contacting for hardware return 1
- information required for hardware return 1
- hardware information for 1
- Juniper Networks Technical Assistance Center 1
- junos-algs-outbound group, for stateful firewall filters 1
- JUNOS CLI 1
- JUNOScope application 1
- JUNOScript API
- management access 1
- defining access (Quick Configuration) 1
- JUNOS Internet software
- CoS components 1
- CoS functions 1
- DiffServ implementation 1
- establishing connectivity 1
- licenses 1
- overview 1
- Packet Forwarding Engine 1
- processes 1
- release notes, URL 1
- Routing Engine 1
- upgrading 1
- version, displaying 1
- junos-jseries package 1
- J-Web configuration editor 1
- J-Web interface 1
- J-Web Quick Configuration 1
K
- keepalive messages, for session hold time 1
- kernel 1
- kernel logging facility 1
- key sequences, editing, in CLI 1
L
- labels, serial number 1
- LAN ports 1
- laptop 1, 2
- lasers
- beam warning 1
- Class 1 product warning 1
- open aperture warning 1
- safety guidelines 1
- leaf statements 1
- leaves 1
- LEDs
- ALARM 1
- Class 1 product warning 1
- configuration 1
- Fast Ethernet port status 1
- IN USE, for removable compact flash 1
- J6300 power supply 1
- LAN port status 1
- PIM status 1
- POWER ON 1
- safety warnings 1
- license keys
- components 1
- displaying (CLI) 1
- displaying (J-Web) 1
- status 1
- version 1
- licenses
- BGP route reflectors 1
- displaying (CLI) 1
- displaying (J-Web) 1
- displaying usage 1
- E1 ports 1
- Fast Ethernet LAN ports (no license required) 1
- Fast Ethernet PIM ports 1
- features requiring a license 1
- installed 1
- IPSec VPNs 1
- J-Flow traffic analysis 1
- JUNOS Internet software 1
- key 1
- managing (CLI) 1
- managing (J-Web) 1
- NAT 1
- overview 1
- preparation for 1
- serial ports 1
- stateful firewall filters 1
- T1 ports 1
- traffic analysis 1
- adding (CLI) 1
- adding (J-Web) 1
- deleting (CLI) 1
- deleting (J-Web) 1
- downloading (J-Web) 1
- saving (CLI) 1
- verifying 1
- Licenses page 1
- lifting guidelines 1
- lightening activity warning 1
- lights 1
- line buildout
- T1 1
- T3 1
- line speed, serial interface 1
- link-state advertisements 1
- link states
- displaying 1
- verifying 1
- lo0.0 1
- load command 1
- loading a configuration file
- CLI configuration editor 1
- downloading (J-Web) 1
- rollback (J-Web) 1
- rollback command 1
- uploading (J-Web) 1
- without specifying full hierarchy 1
- load merge command 1
- load override command 1
- load patch command 1
- load replace command 1
- local password
- default authentication method 1
- order of user authentication (configuration editor) 1
- specifying for authentication (Quick Configuration) 1
- local preference
- description 1
- high value preferred 1
- role in route selection 1
- local template accounts 1
- local tunnel endpoint, IPSec 1
- locked configuration 1
- Log Files page (Download) 1
- logging facilities 1
- logging severity levels 1
- logical interfaces
- adding (configuration editor) 1
- CoS rules for 1
- E1 1
- Fast Ethernet 1
- inside services interface, IPSec 1
- outside services interface, IPSec 1
- serial 1
- T1 1
- T3 1
- virtual channels for 1
- logical operators 1
- logical units
- adding (configuration editor) 1
- E1 interface 1
- Fast Ethernet interface 1
- serial interface 1
- T1 interface 1
- T3 interface 1
- number in interface name 1
- login classes
- defining (configuration editor) 1
- permission bits for 1
- predefined permissions 1
- specifying (Quick Configuration) 1
- login time, displaying 1
- log messages 1
- logs 1
- long buildout 1
- longer route list match type 1
- loopback address 1
- loopback interfaces, applying stateless firewall filters to (configuration editor) 1, 2
- loss priority
- description 1
- LSAs (link-state advertisements)
- three-way handshake 1
M
- MAC (media access control) address
- hardware, displaying 1
- configured, displaying 1
- maintenance
- DRAM modules 1
- PIMs 1
- power cord, replacing (J2300 or J4300) 1
- power system (J6300) 1
- primary compact flash 1
- removable compact flash 1
- tools and parts required 1
- USB drive 1
- warnings 1
- management access 1
- management device
- connecting through J-Web 1
- connecting through the CLI 1
- connecting to J-Web 1
- Management Information Bases 1
- management interface address
- after initial configuration 1
- before initial configuration 1
- displaying 1
- during initial configuration 1
- defining (configuration editor) 1
- defining (Quick Configuration) 1
- management interfaces
- administrative states 1
- Fast Etherrnet 1
- fe-0/0/0 1
- loopback 1
- monitoring 1, 2
- PORT 0 1
- statistics 1
- configuration, displaying 1
- disabling PIM on 1
- management software process 1
- managing users and operations 1
- manuals
- comments on 1
- mapping, CoS forwarding classes to schedulers 1
- match conditions
- routing policy 1
- routing policy, summary of 1
- stateful firewall filter and NAT 1
- stateless firewall filters 1
- stateless firewall filters, summary of 1
- match types 1
- maximum configuration weight
- J4300 1
- J6300 1
- maximum hop count, RIP 1
- maximum transmission unit 1
- MED (multiple exit discriminator)
- description 1
- role in route selection 1
- memory 1
- memory usage, displaying 1
- merging a configuration file 1
- messages 1
- metrics 1
- MF classifier 1
- mgd process 1
- MIBs (Management Information Bases)
- controlling access (configuration editor) 1
- enterprise 1
- standard 1
- system identification (configuration editor) 1
- views (configuration editor) 1
- microkernel 1
- middle pane 1
- midplane, J4300 and J6300 1
- minimum configuration weight
- J4300 1
- J6300 1
- monitor file command 1
- monitoring 1
- monitor interface command 1,
- controlling output 1
- 1
- monitor interface traffic command 1,
- controlling output 1
- 1
- monitor traffic command 1
- monitor traffic matching command 1
- monoammonium phospate 1
- mounting brackets
- J2300 rack installation 1
- J4300 and J6300 rack installation 1
- wall installation (J2300 only) 1
- mounting holes, spacing 1
- MSDP (Multicast Source Discovery Protocol) 1
- mtrace-from-source command 1
- mtrace monitor command 1
- MTU (maximum transmission unit)
- displaying 1
- E1 1
- T1 1
- T3 1, 2
- multiarea network, OSPF 1
- multicast
- *,G notation 1
- administrative scoping 1
- architecture 1
- Auto-RP 1
- BSR 1
- downstream interface 1
- DVMRP 1
- forwarding state notation 1
- IGMP 1
- IP address ranges 1
- MSDP 1
- network elements 1
- overview 1
- PGM 1
- PIM dense mode 1
- PIM source-specific multicast (SSM) 1
- PIM sparse mode 1
- preparation 1
- preventing routing loops 1
- protocols 1
- reverse-path forwarding (RPF) 1
- routing modes 1
- S,G notation 1
- SAP and SDP 1
- session announcements 1
- shortest-path tree (SPT) 1
- static RP 1
- subnetwork leaves and branches 1
- trace operations, displaying 1
- tracing paths 1
- upstream interface 1
- verifying IGMP versions 1
- verifying PIM mode and interface configuration 1
- verifying PIM RPF routing table 1
- verifying PIM RPs 1
- verifying SAP and SDP configuration 1
- multicast routing modes
- dense mode 1
- sparse mode 1
- dense mode, caution for use 1
- Multicast Source Discovery Protocol 1
- multifield classifier 1
- multiple exit discriminator 1
- multiple routers
- rack order 1
- using snapshots to replicate configurations 1
N
- names, of network interfaces 1
- NAPT 1
- NAT (Network Address Translation)
- actions 1
- applying to an interface (configuration editor) 1, 2
- configuration editor 1, 2, 3, 4
- description 1
- displaying pools 1
- enabling (Quick Configuration) 1, 2
- license 1
- match conditions 1
- monitoring pools 1
- pools for IPSec tunnels (configuration editor) 1
- preparation 1, 2
- Quick Configuration 1, 2
- sample rules 1, 2
- verifying 1, 2
- neighbors 1
- Network Address Port Translation 1
- Network Address Translation 1
- network cable pinouts 1
- network interfaces
- adding 1
- administrative states 1
- configuration, displaying 1
- deleting 1
- DS3 configuration 1
- E1 configuration 1
- enabling RIP on 1
- Fast Ethernet configuration 1
- monitoring 1, 2
- monitoring traffic 1
- multicast, upstream and downstream 1
- naming conventions 1
- overview 1
- preparation 1
- serial configuration 1
- statistics 1
- supported 1
- T1 configuration 1
- T3 configuration 1
- verifying PIM on 1
- verifying properties 1
- verifying RIP on 1
- enabling PIM on 1
- network management 1
- networks
- description 1
- designated router 1
- path cost metrics 1
- sample BGP AS path 1
- sample BGP confederation 1
- sample BGP confederations 1
- sample BGP external and internal links 1
- sample BGP local preference use 1
- sample BGP MED use 1
- sample BGP peer network 1
- sample BGP peer session 1
- sample BGP route reflector (one cluster) 1, 2
- sample BGP route reflectors (cluster of clusters) 1
- sample BGP route reflectors (multiple clusters) 1
- sample distance-vector routing 1
- sample multiarea OSPF routing 1
- sample OSPF backbone area 1
- sample OSPF multiarea network 1
- sample OSPF network with stubs and NSSAs 1
- sample OSPF single-area network 1
- sample OSPF stub areas and NSSAs 1
- sample OSPF topology 1
- sample poison reverse routing 1
- sample RIP network with incoming metric 1
- sample RIP network with outgoing metric 1
- sample RIP topology 1
- sample route advertisement 1
- sample route aggregation 1
- sample split horizon routing 1
- sample static route, preferred path 1
- sample stub network for static routes 1
- sample topology 1
- sample unidirectional routing 1
- static routing 1
- trusted 1
- untrusted 1
- Network Time Protocol (NTP) server 1
- next hop
- address for static routes 1
- defining for static routes 1
- qualified, defining for static routes 1
- qualified, for static routes 1
- service set, for IPSec tunnels 1
- displaying 1
- notice icons 1
- notice logging severity 1
- notifications 1
- not-so-stubby areas 1
- no-world-readable statement 1
- NSSAs (not-so-stubby areas)
- area ID (Quick Configuration) 1
- creating (configuration editor) 1
- description 1
- sample topology 1
- area ID (configuration editor) 1
- area type (Quick Configuration) 1
- example 1
- NTP server 1
- numeric range match conditions 1
O
- object identifiers (OIDs) 1
- OIDs (object identifiers) 1
- OK button
- J-Web configuration editor 1
- Quick Configuration 1
- ON button 1
- Open Shortest Path First protocol 1
- operating system 1
- operational mode
- commands 1
- entering during configuration 1, 2
- filtering command output 1
- prompt (>) 1
- operator login class permissions 1
- operators
- arithmetic, binary, and relational operators 1
- logical 1
- origin, of BGP route 1
- orlonger route list match type 1
- OSPF (Open Shortest Path First)
- area border routers 1
- areas 1, 2
- area type (Quick Configuration) 1
- authenticating exchanges (OSPFv2 only) 1
- backbone area 1
- controlling designated router election 1
- controlling route cost 1
- designated router 1
- enabling, description 1
- enabling (Quick Configuration) 1
- ensuring efficient operation 1
- injecting OSPF routes into BGP 1
- LSAs 1
- multiarea network (configuration editor) 1
- NSSAs 1
- overview 1, 2
- path cost metrics 1
- Quick Configuration 1
- requirements 1
- route preferences 1
- router ID (configuration editor) 1, 2
- sample multiarea network 1
- sample network topology 1
- sample NSSAs 1
- sample single-area network 1
- sample stub areas 1
- single-area network (configuration editor) 1
- statistics 1
- stub areas 1
- three-way handshake 1
- tuning an OSPF network 1
- verifying host reachability 1
- verifying neighbors 1
- verifying RIP-enabled interfaces 1
- verifying routes 1
- supported versions 1
- designating OSPF interfaces (Quick Configuration) 1
- router ID (configuration editor) 1
- router ID (Quick Configuration) 1
- designating OSPF interfaces (configuration editor) 1, 2
- monitoring 1
- OSPF interfaces
- displaying 1
- enabling 1
- status 1
- verifying 1
- enabling, for area border routers 1
- enabling (configuration editor) 1, 2
- OSPF neighbors
- displaying 1
- status 1
- verifying 1
- OSPF page 1
- outgoing metric (RIP), modifying 1
- output queues
- assigning forwarding classes 1
- sample assignments 1
- overriding a configuration file 1,
- example 1
- 1
P
- packet encapsulation
- E1 interfaces 1
- serial interfaces 1
- T1 interfaces 1
- T3 interfaces 1
- Packet Forwarding Engine 1
- packets
- applying CoS scheduling rules 1
- discarded 1
- dropped 1
- handling packet fragments 1, 2
- handling packet fragments (configuration editor) 1, 2
- multicast, tracking 1
- RIP, description 1
- tracking with J-Web traceroute 1
- tracking with the traceroute command 1
- packing materials
- packing a Services Router for shipment 1
- packing components for shipment 1
- saving 1
- pages, layout in J-Web 1
- parentheses, in syntax descriptions 1
- partitioning a boot medium 1
- part numbers 1
- passive routes, rejection, in static routing 1
- password 1
- patching a configuration file 1
- path cost metrics
- description 1, 2
- for OSPF routes 1
- paths, multicast, tracing 1
- path-vector protocol 1
- PC 1, 2
- PCI bus 1, 2
- peering sessions 1
- permanent routes, adding 1
- permission bits, for login classes 1
- permissions
- denying and allowing commands 1
- predefined 1
- personnel warning 1
- PGM (Pragmatic General Multicast) 1
- Physical Interface Modules 1
- PIC 1
- PIM (Protocol Independent Multicast)
- disabling on the network management interface 1
- RPF routing table group 1
- source-specific multicast (SSM) 1
- sparse mode 1
- static RP router 1
- verifying the mode 1
- verifying the RP 1
- supported versions 1
- dense mode 1
- PIM LED states 1
- PIMs (Physical Interface Modules)
- blank panel for empty slot 1
- cables and connectors 1
- installing 1
- installing cables 1
- J2300 PIM 1
- J4300 PIMs 1
- J6300 PIMs 1
- LED states 1
- midplane to Routing Engine 1
- red alarm 1
- removing 1
- replacing cables 1
- serial number label 1
- number in interface name 1
- failure 1
- temperature 1
- ping
- host reachability (CLI) 1
- host reachability (J-Web) 1
- indications 1
- results 1
- verifying link states 1
- ping command 1, 2, 3
- Ping Host page 1
- ping trusted-nw-trusted-host 1, 2
- ping untrusted-nw-untrusted-host command 1, 2
- pinouts
- DB–9 connector 1
- EIA-530A DCE serial cable 1
- EIA-530A DTE serial cable 1
- RJ-45 connector 1
- RJ-48 connector to DB–15 connector (crossover) 1
- RJ-48 connector to DB–15 connector (straight) 1
- RJ-48 connector to RJ-48 connector (crossover) 1
- RJ-48 connector to RJ-48 connector (straight) 1
- RS-232 DCE serial cable 1
- RS-232 DTE serial cable 1
- RS-422/449 (EIA-449) DCE serial cable 1
- RS-422/449 (EIA-449) DTE serial cable 1
- V.35 DCE serial cable 1
- V.35 DTE serial cable 1
- X.21 DCE serial cable 1
- X.21 DTE serial cable 1
- pipe (|) command, to filter output 1
- plug types, AC 1
- poison reverse technique 1
- policers
- description 1
- for firewall filter 1
- for stateless firewall filters 1, 2
- ports
- cables, PIM, installing 1
- cables, WAN, removing 1
- configuration, displaying 1
- console 1
- DS3 1
- E1 1
- Fast Ethernet 1, 2
- J2300 LAN 1
- J2300 USB 1
- J4300 LAN 1
- J4300 USB 1
- J6300 LAN 1
- J6300 USB 1
- licenses 1
- lo0.0 1
- monitoring 1
- number in interface name 1
- PORT 0 1
- T1 1
- T3 1
- power 1
- power cords 1
- POWER ON LED states 1
- power supplies, J6300
- blank panel required in empty slot 1
- dedicated AC power feed requirement 1
- description 1
- installing 1
- LED states 1
- redundancy 1
- removing 1
- serial number label 1
- power system
- connecting 1
- J2300 1
- J4300 1
- J6300 1
- fan 1
- Pragmatic General Multicast 1
- preferences
- for OSPF routes 1
- for static routes 1
- setting for static routes 1
- prefix-length-range match type 1
- preparing for installation 1
- primary compact flash 1
- processes, software
- chassis process 1
- forwarding process 1
- interface process 1
- management process 1
- routing protocols process 1
- product disposal 1
- product overview 1
- prompt 1
- propagation, suppressing 1
- properties
- system, monitoring 1
- verifying for network interfaces 1
- Protocol Independent Multicast 1
- protocols
- Auto-RP 1
- BGP 1
- BSR 1
- distance vector 1
- DVMRP 1
- EGPs 1
- IGMP 1
- IGPs 1
- MSDP 1
- originating, displaying 1
- OSPF 1
- overview 1
- path vector 1
- PGM 1
- PIM dense mode 1
- PIM source-specific multicast (SSM) 1
- PIM sparse mode 1
- RIP 1
- SAP and SDP 1
Q
- queuing rules, CoS 1
- Quick Configuration
- Add a RADIUS Server page 1
- Add a TACACS+ Server page 1
- Add a User page 1
- adding users 1
- authentication method 1
- basic settings 1
- BGP page 1
- buttons 1
- capabilities 1
- E1 Interfaces page 1
- Fast Ethernet Interfaces page 1
- initial configuration 1
- Install Remote page 1
- Interfaces page 1
- IPSec Tunnels page 1
- network interfaces 1
- OSPF page 1
- overview 1
- RADIUS server 1
- RIP page 1
- serial Interfaces page 1
- Set Up page 1
- SNMP page 1
- Static Routes page 1
- Summary page 1
- T1 Interfaces page 1
- T3 (DS3) Interfaces page 1
- TACACS+ server 1
- Upload Package page 1
- user management 1
- Users page 1
R
- rack ears 1
- rack installation
- general requirements 1
- J2300 1
- J2300 mounting brackets 1
- J4300 1
- J4300 and J6300 mounting brackets 1
- J6300 1
- mounting holes, spacing 1
- order of multiple routers 1
- safety guidelines and warnings 1
- securing rack to building 1
- size requirements 1
- support for front-mount rack 1
- ventilation requirement 1
- radio buttons
- Delete Configuration Below This Point 1
- Discard All Changes 1
- Discard Changes Below This Point 1
- radio frequency interference (RFI), reducing 1
- RADIUS
- adding a server (Quick Configuration) 1
- authentication (configuration editor) 1
- order of user authentication (configuration editor) 1
- secret (configuration editor) 1
- secret (Quick Configuration) 1
- specifying for authentication (Quick Configuration) 1
- ramp angle requirement 1
- random early detection 1
- reactivate command 1
- read-only login class permissions 1
- read or write error, Routing Engine 1
- reboot immediately
- with J-Web 1
- with the CLI 1
- rebooting
- with J-Web 1
- with the CLI 1
- RED (random early detection)
- drop profiles 1
- red alarm
- Routing Engine 1
- PIMs 1
- red asterisk (*) 1
- RED drop profiles 1
- redistributing routes 1
- redundant J6300 power supplies 1
- Refresh button 1
- registration form, for software upgrades 1
- regulatory compliance 1
- rejecting invalid routes 1
- relational operators 1
- relative option 1
- release notes, URL 1
- remote accounts 1
- remote server, upgrading from 1
- remote template accounts 1
- remote tunnel endpoint, IPSec 1
- removable compact flash 1
- rename command 1
- renaming configuration identifiers 1
- replacement
- DRAM modules 1
- PIMs 1
- power cord, replacing (J2300 or J4300) 1
- power system (J6300) 1
- primary compact flash 1
- removable compact flash 1
- tools and parts required 1
- USB drive 1
- replacing a configuration file 1
- request chassis pic fpc-slot command 1
- request system configuration rescue save command 1
- request system halt command 1
- request system license add command 1
- request system license delete command 1
- request system license save command 1
- request system reboot command 1, 2
- request system snapshot command 1
- request system snapshot media removable-compact-flash command 1
- request system snapshot media usb command 1
- request system software add validate command 1
- request system software delete-backup command 1
- request system software rollback 1
- request system software rollback command 1
- required entry (J-Web) 1
- rescue configuration
- CONFIG button on front panel 1
- deleting (J-Web) 1
- setting (J-Web) 1
- viewing (CLI configuration editor) 1
- viewing (J-Web) 1
- setting (CLI configuration editor) 1
- restart after upgrade prompt 1
- returning hardware 1
- Return Materials Authorization 1
- reverse-path forwarding 1
- reverting to a previous configuration file (J-Web) 1
- rewrite rules
- description 1
- replacing DSCPs 1
- sample rules 1
- when applied 1
- RIB 1
- RIP (Routing Information Protocol)
- authentication (RIPv2 only) 1
- authentication (RIPv2 only), configuring 1
- basic network (configuration editor) 1
- distance vector protocol 1
- efficiency techniques 1
- enabling (Quick Configuration) 1
- maximum hop count 1
- overview 1, 2
- packets 1
- poison reverse technique 1
- Quick Configuration 1
- requirements 1
- sample network with incoming metric 1
- sample network with outgoing metric 1
- sample topology 1
- split horizon technique 1
- statistics 1
- supported versions 1
- traffic control with metrics 1
- traffic control with metrics, configuring 1
- unidirectional limitations 1
- verifying host reachability 1
- verifying RIP-enabled interfaces 1
- designating RIP interfaces 1
- monitoring 1
- RIP neighbors
- displaying 1
- status 1
- verifying 1
- RIP page 1
- RJ-45 connector pinouts 1
- RJ-45 to DB-9 serial port adapter 1
- RJ-48 connector to DB–15 connector (crossover) pinouts 1
- RJ-48 connector to DB–15 connector (straight) pinouts 1
- RJ-48 connector to RJ-48 connector (crossover) pinouts 1
- RJ-48 connector to RJ-48 connector (straight) pinouts 1
- RMA (Return Materials Authorization) 1
- rollback ? command 1
- rollback command 1
- rollback rescue command 1
- rolling back a configuration file
- during configuration (CLI configuration editor) 1
- during configuration (J-Web) 1
- to downgrade software (CLI) 1
- root password
- characteristics 1
- defining (configuration editor) 1
- defining (Quick Configuration) 1
- rotating files 1
- route advertisements
- AS path in 1
- BGP, update messages 1
- description 1
- external, EBGP 1
- LSAs 1
- stub areas and NSSAs, to control 1
- internal, IBGP 1
- route aggregation 1
- route-flap damping 1
- route injection 1
- route list match types 1
- route manipulation actions, routing policies 1
- router 1
- route redistribution 1
- route reflectors 1
- route selection
- BGP, determining by AS path 1
- BGP, determining by local preference 1
- BGP, determining by MED metric 1
- BGP, lowest origin value preferred 1
- BGP process 1
- static routes, defining 1
- routing 1
- Routing Engine
- fan failure 1
- handling packet fragments for (configuration editor) 1, 2
- J2300 functions and components 1
- J4300 functions and components 1
- J6300 functions and components 1
- kernel 1
- midplane to PIMs 1
- protecting against DoS attacks (configuration editor) 1, 2
- protecting against untrusted services and protocols (configuration editor) 1, 2
- read or write error 1
- red alarm 1
- software component 1
- temperature 1
- too hot 1
- too warm 1
- yellow alarm 1
- fan 1
- routing information base 1
- Routing Information Protocol 1
- routing policies
- actions 1
- applying 1
- components 1
- configuration tasks 1
- default actions 1
- export statement 1
- final actions 1
- forwarding class with source and destination 1
- grouping source and destination prefixes 1
- import statement 1
- injecting routes from one protocol into another 1
- making BGP routes less preferable 1
- match conditions 1
- overview 1
- policy name 1
- preparation 1
- prepending AS paths 1
- reducing update messages with flap damping 1
- rejecting invalid routes 1
- route-flap damping 1
- route redistribution 1
- terms 1
- terms, creating 1
- BGP routing policy (configuration editor) 1
- export, displaying 1
- import, displaying 1
- routing protocols 1
- routing protocols software process 1
- routing solutions
- BGP confederations, for scaling problems 1
- BGP route reflectors, for scaling problems 1
- BGP scaling techniques 1
- controlling designated router election 1
- controlling OSPF route cost 1
- controlling OSPF route selection 1
- controlling RIP traffic with the incoming metric 1
- controlling RIP traffic with the outgoing metric 1
- CoS with DiffServ 1, 2
- designated router, to reduce flooding 1
- directing BGP traffic by local preference 1
- filtering unwanted services and protocols 1, 2
- firewall filters and NAT 1, 2
- handling packet fragments 1, 2
- handling packet fragments (configuration editor) 1, 2
- making BGP routes less preferable 1
- multicast administrative scoping 1
- multicast reverse-path forwarding (RPF) 1
- multicast shortest-path tree (SPT) 1
- NSSAs, to control route advertisement 1
- path cost metrics, for packet flow control 1
- poison reverse, for traffic reduction 1
- preventing multicast routing loops 1
- protecting against DoS attacks 1, 2
- reducing update messages with flap damping 1
- rejecting invalid routes 1
- routing policies 1, 2
- securing OSPF routing (OSPFv2 only) 1
- split horizon, for traffic reduction 1
- static route control techniques 1
- stub areas, to control route advertisement 1
- VPNs 1
- routing table
- controlling static routes in 1, 2
- description 1
- displaying static routes in 1
- monitoring 1
- RPF group, for multicast 1
- sample distance-vector routing 1
- updates, limitations in RIP 1
- verifying for RPF 1
- verifying OSPF routes 1
- displaying 1
- RP (rendezvous point)
- static 1
- verifying 1
- rpd process 1
- RPF (reverse-path forwarding)
- description 1
- routing table group 1
- verifying the routing table 1
- RS-232 DCE cable pinouts 1
- RS-232 DTE cable pinouts 1
- RS-422/449 (EIA-449) DCE cable pinouts 1
- RS-422/449 (EIA-449) DTE cable pinouts 1
- rubber feet 1
- run command 1
S
- S,G notation, for multicast forwarding states 1
- safety guidelines and warnings
- AC power 1
- battery handling 1
- electrical 1
- general 1
- grounded equipment 1
- in case of electrical accident 1
- installation 1
- jewelry removal 1
- lasers and LEDs 1
- levels 1
- lightening activity 1
- maintenance and operation 1
- multiple power supplies (J6300 only) 1
- operating temperature 1
- power disconnection 1
- product disposal 1
- rack-mounting 1
- ramps 1
- read installation instructions 1
- telecommunications cord 1
- TN power system 1
- safety standards 1
- samples
- configuration, for basic connectivity 1
- firewall filter configurations 1, 2
- network topologies 1
- SAP (Session Announcement Protocol)
- description 1
- session announcements 1
- verifying 1
- saving
- configuration files 1
- licenses (CLI) 1
- scaling BGP 1
- schedulers
- assigning resources 1
- default settings 1
- description 1
- mapping to forwarding classes 1
- sample mappings 1
- sample schedulers 1
- scheduling a commit 1
- scheduling a reboot
- with J-Web 1
- with the CLI 1
- scoping, administrative 1
- screen length, CLI, setting 1
- screen width, CLI, setting 1
- screw and anchor capacity, for wall installation 1
- SDP (Session Discovery Protocol)
- session announcements 1
- verifying 1
- description 1
- SDX application 1
- search, IDS 1
- secret 1
- security
- access privileges 1, 2
- IDS intrusion detection 1
- IPSec tunnels 1
- MD5 authentication for OSPF 1
- MD5 authentication for RIPv2 1
- password authentication for OSPFv2 1
- password authentication for RIPv2 1
- user accounts 1, 2
- user authentication 1
- security association 1
- serial number
- chassis components, label 1
- PIMs 1
- power supply 1
- chassis components 1
- Services Router 1
- serial ports
- cables and connectors 1
- CHAP 1
- clocking 1
- clock rate 1
- configuring 1
- EIA-530A DCE pinouts 1
- EIA-530A DTE pinouts 1
- encapsulation type 1
- line speed 1
- logical interfaces 1
- RS-232 DCE pinouts 1
- RS-232 DTE pinouts 1
- RS-422/449 (EIA-449) DCE pinouts 1
- RS-422/449 (EIA-449) DTE pinouts 1
- V.35 DCE pinouts 1
- V.35 DTE pinouts 1
- X.21 DCE pinouts 1
- X.21 DTE pinouts 1
- license 1
- service classes
- corresponding DSCPs 1
- service provider requirements, for autoinstallation 1
- service sets, for IPSec tunnels 1
- services interfaces
- applying a NAT rule to (configuration editor) 1, 2
- applying a stateful firewall filter to (configuration editor) 1, 2
- for IPSec tunnels 1
- Services Router
- backup 1
- BGP routing 1
- configuration tools 1
- CoS overview 1
- CoS with DiffServ 1
- dimensions 1
- establishing software connectivity 1
- firewall filter overview 1
- firewall filters 1
- grounding 1
- halting (CLI) 1
- halting (J-Web) 1
- hardware 1
- hardware replacement 1
- hardware return 1
- installation and connection 1
- IPSec tunnels 1
- licenses 1
- managing users and operations 1
- monitoring and diagnosis 1
- multicast 1
- multicast overview 1
- NAT 1
- network cables and connectors 1
- network interfaces 1
- network management 1
- operating environment 1
- OSPF routing 1
- overview 1, 2
- packing for shipment 1
- powering on and off 1
- preparation checklist 1
- rebooting (CLI) 1
- rebooting (J-Web) 1
- RIP routing 1
- routing policies 1
- routing policy overview 1
- routing protocols overview 1
- safety and compliance 1
- serial number, displaying 1
- site preparation 1
- software 1
- software upgrades 1
- static routing 1
- unpacking 1
- user interfaces 1, 2
- VPNs 1
- Session Announcement Protocol 1, 2
- sessions
- announcements, multicast 1
- BGP session establishment 1
- BGP session maintenance 1
- J-Web 1
- telnet 1
- set cli commands 1
- set requests 1
- set system dump device command 1,
- options 1
- 1
- setup
- configuration editor 1
- Quick Configuration 1
- requirements 1
- Set Up Quick Configuration page 1
- severity levels
- for alarms, displaying 1
- for system logs 1
- shipping carton
- contents 1
- packing components for shipment 1
- packing a Services Router for shipment 1
- saving 1
- shortest path first algorithm 1
- shortest-path tree 1
- show bgp group command 1
- show bgp neighbor command 1, 2
- show bgp summary command 1, 2
- show chassis alarms command 1, 2
- show chassis environment command 1
- show chassis hardware command 1, 2
- show cli command 1
- show cli history command 1
- show command 1
- show firewall command 1, 2
- show firewall filter protect-RE command 1, 2, 3, 4
- show firewall log 1, 2
- show igmp interface command 1
- show interfaces detail command 1, 2
- show interfaces interface-name command 1
- show interfaces lo0 command 1, 2
- show interfaces terse command 1
- show log command 1
- show multicast rpf command 1
- show ospf interface command 1
- show ospf interfaces command 1
- show ospf neighbor command 1
- show ospf neighbors command 1
- show ospf route command 1
- show ospf statistics command 1
- show pim interface command 1
- show pim rps command 1
- show rip neighbor command 1
- show rip neighbors command 1
- show rip statistics command 1
- show route detail command 1
- show route summary command 1, 2, 3, 4
- show route terse command 1, 2
- show sap listen command 1, 2
- show services command 1, 2
- show services ids destination-table command 1
- show services ids pair-table command 1
- show services ids source-table command 1
- show services ipsec-vpn ike command 1
- show services ipsec-vpn ipsec command 1
- show services ipsec-vpn ipsec statistics command 1
- show services nat pool command 1
- show services stateful-firewall conversations command 1
- show services stateful-firewall flows command 1
- show snmp statistics command 1
- show system license command 1, 2
- show system license keys command 1
- show system processes command 1, 2
- show system reboot command 1
- show system storage command 1, 2
- show system uptime command 1
- show system users command 1
- shutdown 1, 2
- side pane 1
- signaling limitations 1
- Simple Network Management Protocol 1
- single-area network, OSPF 1
- site preparation
- checklist 1
- electrical wiring guidelines 1
- fire safety 1
- for desktop and wall installation 1
- for rack installation 1
- guidelines 1
- operating environment 1
- power requirements 1
- size
- J2300 1
- J4300 1
- J6300 1
- requirements for rack installation 1
- SMI (Structure of Management Information) 1
- snapshots
- configuring for failure snapshot storage 1
- to replace primary compact flash, for multiple routers 1
- SNMP (Simple Network Management Protocol)
- agents 1
- communities 1
- controlling access (configuration editor) 1, 2
- get requests 1
- managers 1
- MIBs 1
- overview 1
- preparation 1
- Quick Configuration 1
- set requests 1
- system identification (configuration editor) 1
- traps 1
- views (configuration editor) 1
- SNMP agents 1
- SNMP communities
- creating (configuration editor) 1
- Quick Configuration 1
- description 1
- SNMP managers 1
- SNMP page 1
- SNMP traps
- creating groups for (configuration editor) 1
- description 1
- Quick Configuration 1
- software
- features 1
- halting immediately (CLI) 1
- halting immediately (J-Web) 1
- licenses 1
- upgrades 1
- version, displaying 1
- source-specific multicast 1
- sp-0/0/0
- for IPSec tunnels (configuration editor) 1
- no stateful firewall filters 1
- sparse mode 1
- specifications
- electrical 1
- electrical connection 1
- environmental 1
- grounding cable 1
- grounding lug 1
- J2300 hardware 1
- J4300 hardware 1
- J6300 hardware 1
- power cords 1
- serial PIM cables and connectors 1
- SPF (shortest path first) algorithm 1
- split horizon technique 1
- SPT (shortest-path tree) 1
- SSH
- accessing remote accounts (CLI) 1
- defining (configuration editor) 1
- defining access (Quick Configuration) 1
- management access 1
- ssh command 1, 2, 3
- standards compliance 1
- startup
- JUNOS CLI 1
- J-Web interface 1
- Services Router 1
- stateful firewall filters
- actions 1
- applying to an interface (configuration editor) 1, 2
- automatic discard rule 1
- configuration editor 1, 2, 3, 4
- configuration overview 1
- description 1
- displaying 1
- do not apply to sp-0/0/0 1
- enabling (Quick Configuration) 1, 2
- for IPSec tunnels (configuration editor) 1
- junos-algs-outbound default group 1
- match conditions 1
- monitoring 1
- preparation 1, 2
- Quick Configuration 1, 2
- sample rules 1, 2
- untrusted network 1
- verifying 1, 2
- verifying actions 1, 2
- license 1
- flow status 1
- stateless firewall filters
- actions and action modifiers 1
- applying to an interface (configuration editor) 1, 2
- automatic discard rule 1
- bit-field logical operators 1
- handling packet fragments 1, 2
- handling packet fragments (configuration editor) 1, 2
- match conditions 1
- planning 1, 2, 3
- policers for 1, 2
- preparation 1, 2
- protecting the Routing Engine against ICMP floods (configuration editor) 1, 2
- protecting the Routing Engine against TCP floods (configuration editor) 1, 2
- protecting the Routing Engine against untrusted protocols (configuration editor) 1, 2
- protecting the Routing Engine against untrusted services (configuration editor) 1, 2
- sample terms, to filter fragments 1, 2
- sample terms, to filter services and protocols 1, 2
- sample terms, to protect against DoS attacks 1, 2
- typical, planning 1, 2
- description 1
- statements
- adding or modifying 1
- copying 1
- deactivating 1
- deleting 1
- replacing 1
- types 1
- static routes
- configuring basic routes (configuration editor) 1
- controlling 1
- controlling in routing and forwarding tables 1
- default properties 1
- default properties, setting 1
- defining route selection 1
- preferences 1
- preventing readvertisement 1
- qualified next hops 1
- Quick Configuration 1
- rejecting passive traffic 1
- requirements 1
- route retention 1
- sample preferred path 1
- sample stub network 1
- verifying 1
- Static Routes page 1
- static routing 1
- static RP router 1
- statistics
- BGP 1
- firewall filters 1, 2
- interfaces 1
- IPSec 1
- IPSec tunnels 1
- OSPF 1
- RIP 1
- status 1
- status command 1
- Structure of Management Information (SMI) 1
- stub areas
- area ID (configuration editor) 1
- area type (Quick Configuration) 1
- controlling OSPF route cost 1
- creating (configuration editor) 1
- description 1
- example 1
- sample topology 1
- area ID (Quick Configuration) 1
- sub-ASs, BGP 1
- subautonomous systems, BGP 1
- subnetworks
- description 1
- multicast leaves and branches 1
- route aggregation 1
- Summary Quick Configuration page 1
- superuser login class permissions 1
- super-user login class permissions 1
- support, technical 1
- syntax conventions 1
- syslog 1
- system identification, displaying 1
- system log messages
- displaying at a terminal (configuration editor) 1
- sending to a file (configuration editor) 1
- system logs 1
- system management 1
- system overview
- hardware 1
- software 1
- system storage, displaying 1
- system time 1
T
- T1 ports
- cable length 1
- CHAP 1
- clocking 1
- configuring 1
- data inversion 1
- encapsulation type 1
- frame checksum 1
- framing 1
- logical interfaces 1
- RJ-48 cable pinouts 1
- time slots 1
- fractional, channel number 1
- license 1
- MTU 1
- T3 ports
- cable length 1
- C-bit parity 1
- CHAP 1
- clocking 1
- configuring 1
- encapsulation type 1
- frame checksum 1
- framing 1
- logical interfaces 1
- MTU 1, 2
- TACACS+
- adding a server (Quick Configuration) 1
- authentication (configuration editor) 1
- order of user authentication (configuration editor) 1
- specifying for authentication (Quick Configuration) 1
- secret (configuration editor) 1
- secret (Quick Configuration) 1
- task bar 1
- TCP, policers for 1, 2
- technical support
- contacting JTAC 1
- contacting JTAC for hardware return 1
- hardware information for 1
- information required for hardware return 1
- telecommunications line wire gauge 1
- telnet
- accessing remote accounts (CLI) 1
- defining access (Quick Configuration) 1
- management access 1
- telnet command 1, 2, 3
- telnet session 1
- temperature
- chassis, displaying 1
- required for operation 1
- Routing Engine, too hot 1
- Routing Engine, too warm 1
- warning 1
- templates accounts
- description 1
- local accounts (configuration editor) 1
- remote accounts (configuration editor) 1
- temporary files
- cleaning up (J-Web) 1
- displaying size 1
- downloading (J-Web) 1
- terminal type, setting 1
- terminology
- basic connectivity 1
- configuration 1
- CoS 1
- diagnostic 1
- firewall filters 1
- monitoring 1
- multicast 1
- network interfaces 1
- routing 1
- routing policies 1
- system management 1
- terms
- firewall filter, for multifield classifier 1
- in a routing policy 1
- in a routing policy, creating 1
- thermal output 1
- three-way handshake 1
- through route list match type 1
- time 1
- time slots
- E1 1
- number in interface name 1
- T1 1
- time to live 1
- time zone 1
- TN power system 1
- tolerances, environmental 1
- tools and equipment
- for component replacement 1
- for hardware return 1
- for installation 1
- top command 1
- topology
- sample BGP AS path 1
- sample BGP confederation 1
- sample BGP confederations 1
- sample BGP external and internal links 1
- sample BGP local preference use 1
- sample BGP MED use 1
- sample BGP peer network 1
- sample BGP peer session 1
- sample BGP route reflector (one cluster) 1, 2
- sample BGP route reflectors (cluster of clusters) 1
- sample BGP route reflectors (multiple clusters) 1
- sample distance-vector routing 1
- sample multiarea OSPF routing 1
- sample network 1
- sample OSPF backbone area 1
- sample OSPF multiarea network 1
- sample OSPF network 1
- sample OSPF network with stubs and NSSAs 1
- sample OSPF single-area network 1
- sample OSPF stub areas and NSSAs 1
- sample poison reverse routing 1
- sample RIP network 1
- sample RIP network with incoming metric 1
- sample RIP network with outgoing metric 1
- sample route advertisement 1
- sample route aggregation 1
- sample split horizon routing 1
- sample static route 1
- sample static route, preferred path 1
- sample stub network for static routes 1
- sample unidirectional routing 1
- topology database, OSPF 1
- top pane 1
- to statement, routing policy match conditions 1
- trace files
- monitoring 1
- multicast, monitoring 1
- traceroute
- CLI command 1
- indications 1
- J-Web tool 1
- results 1
- TTL increments 1
- traceroute command 1
- Traceroute page 1
- traffic
- controlling with incoming RIP metric 1
- controlling with outgoing RIP metric 1
- incoming, securing 1
- multicast, tracking 1
- outgoing, securing 1
- tracking with J-Web traceroute 1
- tracking with the traceroute command 1
- traffic analysis license 1
- transmission speed, displaying 1
- transmit clock source 1
- troubleshooting a Services Router 1, 2
- trusted networks, firewall filter protection 1
- TTL (time to live)
- default, in multicast path-tracking queries 1
- increments, in traceroute packets 1
- in ping requests 1
- threshold, in multicast trace results 1
- total, in multicast trace results 1
- TTY, displaying 1
- tunneling through a public network 1
- tunnels 1
- turning on a Services Router 1
- Type C fire extinguishers 1
- types
- of configuration statements 1
- of network interfaces 1
U
- unauthorized login class permissions 1
- universal serial bus 1
- unpacking the router 1
- untrusted networks, firewall filter actions on 1
- up command 1
- upgrades
- downloading 1
- installing (CLI) 1
- installing by uploading (Quick Configuration) 1
- installing from remote server (Quick Configuration) 1
- overview 1
- requirements 1
- uploading a configuration file 1
- Upload package page 1
- upstream interfaces 1
- upto route list match type 1
- URLs
- release notes 1
- return and repair policies 1
- software downloads 1
- support 1
- USB (universal serial bus)
- configuring 1
- configuring for failure snapshot storage 1
- copying a boot image with Cygwin 1
- copying a boot image with UNIX 1
- drive, installing 1
- drive, removing 1
- J2300 USB port 1
- J4300 USB port 1
- J6300 USB port 1
- usb0 1
- user accounts
- authentication order (configuration editor) 1
- contents 1
- creating (configuration editor) 1
- for local users 1
- for remote users 1
- predefined login classes 1
- templates for 1, 2
- user interfaces
- feature comparison 1
- JUNOS command-line interface (CLI) 1
- JUNOScope application 1
- J-Web graphical user interface (GUI) 1
- overview 1
- preparation 1
- SDX application 1
- user logging facility 1
- username
- description 1
- displaying 1
- specifying (Quick Configuration) 1
- users
- access privileges 1, 2
- accounts 1
- adding (Quick Configuration) 1
- displaying 1
- login classes 1, 2
- predefined login classes 1
- template accounts 1
- usernames 1
- Users Quick Configuration page 1
V
- V.35 DCE cable pinouts 1
- V.35 DTE cable pinouts 1
- ventilation requirement 1
- verification
- active licenses 1
- basic connectivity 1
- BGP configuration 1
- BGP groups 1
- BGP peer reachability 1
- BGP peers (neighbors) 1
- configuration syntax 1
- destination path (J-Web) 1
- firewall filter actions 1, 2
- firewall filter flood protection 1, 2
- firewall filter handles fragments 1, 2
- firewall filter operation 1, 2
- firewall filters 1, 2
- firewall statistics 1, 2
- host reachability (CLI) 1
- host reachability (J-Web) 1
- IGMP version 1
- IPSec tunnel operation 1
- license usage 1
- multicast SAP and SDP 1
- multicast session announcements 1
- network interfaces 1
- OSPF-enabled interfaces 1
- OSPF host reachability 1
- OSPF neighbors 1
- OSPF routes 1
- PIM mode and interface configuration 1
- PIM RP address 1
- PIM RPF routing table 1
- RIP-enabled interfaces 1
- RIP host reachability 1
- SNMP 1
- stateful firewall filters 1, 2
- static routes in the routing table 1
- traceroute command 1
- tracing multicast paths 1
- licenses 1
- version
- hardware, displaying 1
- license key 1
- OSPF, supported 1
- RIP, supported 1
- software, displaying 1
- View Configuration Text page 1
- views, SNMP 1
- virtual channels
- applying CoS rules to logical interfaces 1
- virtual link, through the backbone area 1
- virtual private network license 1
- VPN license 1
W
- wall installation (J2300 only) 1
- warning logging severity 1
- warnings
- battery handling 1
- earthed mains socket (Norway and Sweden only) 1
- electrical 1
- ESD strap to prevent router damage 1, 2
- general 1
- grounded equipment 1
- installation 1
- jewelry removal 1
- laser and LED 1
- levels defined 1
- lightening activity 1
- maintenance and operational 1
- multiple power supply disconnection 1
- operating temperature 1
- personnel 1
- power disconnection 1
- product disposal 1
- rack-mounting requirements 1
- ramp angle 1
- read installation instructions 1
- telecommunications lines 1
- TN power system 1
- weight
- J2300 1
- J2300 two-person installation requirement 1
- J4300 1
- J4300 and J6300 two-person installation requirement 1
- J6300 1
- rack-mount requirements 1
- wire gauge
- for telecommunications lines 1
- for grounding cable 1
- wiring guidelines
- radio frequency interference (RFI) 1
- signaling limitations 1
- suppressing electromagnetic interference (EMI) 1
- working directory, setting 1
- world-readable statement 1
X
- X.21 DCE cable pinouts 1
- X.21 DTE cable pinouts 1
Y
- yellow alarm
- Routing Engine 1
- alternative boot device 1