[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Disabling Dialing Out Through Dialer Interfaces

The JUNOS ISDN dialer services process manages dialing out through dialer interfaces. You can disable dialing out through all dialer interfaces by disabling the dialer services process.

Caution: Never disable a software processes unless instructed to do so by a Customer Support engineer.

To disable dialing out through dialer interfaces:

  1. Navigate to the top of the configuration hierarchy in either the J-Web or CLI configuration editor.
  2. Perform the configuration tasks described in Table 73.
  3. If you are finished configuring the router, commit the configuration.

Table 73: Disabling Dialing Out Through Dialer Interfaces

Task

J-Web Configuration Editor

CLI Configuration Editor

Navigate to the Processes level in the configuration hierarchy.
  1. In the J-Web interface, select Configuration>View and Edit>Edit Configuration.
  2. Next to System, click Edit.
  3. Next to Processes, click Configure.
  4. Next to Dialer services, click Configure.

From the [edit] hierarchy level, enter

set system processes dialer-services disable

Disable dialing out through dialer interfaces.
  1. Select the Disable check box.
  2. Click OK.
 
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

[an error occurred while processing this directive]