[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Modifying the IP Address of the TGM550

Caution: The TGM550 is reset when you commit the configuration after modifying the IP address. Before modifying the TGM550 IP address, take the following precautions:

  • Log into the TGM550 and enter copy running-config startup-config to save the TGM550 configuration. (For login instructions, see Accessing and Administering the TGM550 CLI.)
  • Ensure that the TGM550 is not currently handling voice traffic.

To modify the IP address of the TGM550:

  1. Navigate to the top of the interfaces configuration hierarchy in either the J-Web or CLI configuration editor.
  2. Perform the configuration tasks described in Table 110.
  3. If you are finished configuring the router, commit the configuration.

Table 110: Modifying the IP Address of the TGM550

Task

J-Web Configuration Editor

CLI Configuration Editor

Navigate to the Interfaces level in the configuration hierarchy.

  1. In the J-Web interface, select Configuration>View and Edit>Edit Configuration.
  2. Next to Interfaces, click Edit.

From the [edit] hierarchy level, enter

edit interfaces vp-3/0/0 unit 0

Select the logical VoIP interface—for example, vp-3/0/0.0.
  1. In the Interface name column, click the VoIP interface name vp-3/0/0.
  2. In the Interface unit number box, click 0.
 

Modify the destination IP address for the TGM550 to a different address—for example, 10.10.10.80.

For guidelines, see TGM550 IP Addressing Guidelines.

Note: You cannot specify more than one IP address.
  1. Under Family, next to Inet, click Edit.
  2. Under Address, in the Broadcast column, click Edit.
  3. In the Destination box, type 10.10.10.80.
  4. Click OK.

Enter

set family inet address 10.10.10.1/32 destination 10.10.10.80

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

[an error occurred while processing this directive]