[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Disabling Packet Capture

You must disable packet capture before opening the packet capture file for analysis or transferring the file to an external device. Disabling packet capture ensures that the internal file buffer is flushed and all the captured packets are written to the file.

To disable packet capture:

  1. Navigate to the top of the configuration hierarchy in either the J-Web or CLI configuration editor.
  2. Perform the configuration tasks described in Table 223.
  3. If you are finished configuring the device, commit the configuration.

Table 223: Disabling Packet Capture

Task

J-Web Configuration Editor

CLI Configuration Editor

Navigate to the Forwarding options level in the configuration hierarchy.
  1. In the J-Web interface, select Configuration>View and Edit>Edit Configuration.
  2. Next to Forwarding options, click Configure or Edit.

From the [edit] hierarchy level, enter

edit forwarding-options

Disable packet capture.
  1. Next to Packet capture, click Edit.
  2. Next to Disable, select Yes.
  3. Click OK until you return to the Configuration page.

Enter set packet-capture disable.
[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

[an error occurred while processing this directive]