|
host
|
Pings the hostname or IP address you specify.
|
|
interface source-interface
|
(Optional) Sends the ping requests on the interface you specify.
If you do not include this option, ping requests are sent on all interfaces.
|
|
bypass-routing
|
(Optional) Bypasses the routing tables and sends the ping requests
only to hosts on directly attached interfaces. If the host is not
on a directly attached interface, an error message is returned.
Use this option to ping a local system through an interface
that has no route through it.
|
|
countnumber
|
(Optional) Limits the number of ping requests to send. Specify
a count from 1 through 2,000,000,000. If you do
not specify a count, ping requests are continuously sent until you
press Ctrl-C.
|
|
do-not-fragment
|
(Optional) Sets the Don't Fragment (DF) bit in the IP header
of the ping request packet.
|
|
inet
|
(Optional) Forces the ping requests to an IPv4 destination.
|
|
inet6
|
(Optional) Forces the ping requests to an IPv6 destination.
|
|
interval seconds
|
(Optional) Sets the interval between ping requests, in seconds.
Specify an interval from 0.1 through 10,000. The
default value is 1 second.
|
|
loose-source [hosts]
|
(Optional) For IPv4, sets the loose source routing option in
the IP header of the ping request packet.
|
|
no-resolve
|
(Optional) Suppresses the display of the hostnames of the hops
along the path.
|
|
pattern string
|
(Optional) Includes the hexadecimal string you specify, in the
ping request packet.
|
|
rapid
|
(Optional) Sends ping requests rapidly. The results are reported
in a single message, not in individual messages for each ping request.
By default, five ping requests are sent before the results are reported.
To change the number of requests, include the count option.
|
|
record-route
|
(Optional) For IPv4, sets the record route option in the IP
header of the ping request packet. The path of the ping request packet
is recorded within the packet and displayed on the screen.
|
|
routing-instance routing-instance-name
|
(Optional) Uses the routing instance you specify for the ping
request.
|
|
size bytes
|
(Optional) Sets the size of the ping request packet. Specify
a size from 0 through 65,468. The default value
is 56 bytes, which is effectively 64 bytes because 8 bytes
of ICMP header data are added to the packet.
|
|
source source-address
|
(Optional) Uses the source address that you specify, in the
ping request packet.
|
|
strict
|
(Optional) For IPv4, sets the strict source routing option in
the IP header of the ping request packet.
|
|
strict-source [hosts]
|
(Optional) For IPv4, sets the strict source routing option in
the IP header of the ping request packet, and uses the list of hosts
you specify for routing the packet.
|
|
tos number
|
(Optional) Sets the type-of-service (TOS) value in the IP header
of the ping request packet. Specify a value from 0 through 255.
|
|
ttl number
|
(Optional) Sets the time-to-live (TTL) value for the ping request
packet. Specify a value from 0 through 255.
|
|
wait seconds
|
(Optional) Sets the maximum time to wait after sending the last
ping request packet. If you do not specify this option, the default
delay is 10 seconds. If you use this option without
the count option, the Services Router uses a default count
of 5 packets.
|
|
detail
|
(Optional) Displays the interface on which the ping response
was received.
|
|
verbose
|
(Optional) Displays detailed output.
|