|
Remote Host
|
Identifies the destination host of the traceroute.
|
Type the hostname or IP address of the destination host.
|
| Advanced
Options |
|
Don't Resolve Addresses
|
Determines whether hostnames of the hops along the path are
displayed, in addition to IP addresses.
|
- To suppress the display of the hop hostnames, select the
check box.
- To display the hop hostnames, clear the check box.
|
|
Gateway
|
Specifies the IP address of the gateway to route through.
|
Type the gateway IP address.
|
|
Source Address
|
Specifies the source address of the outgoing traceroute packets.
|
Type the source IP address.
|
|
Bypass Routing
|
Determines whether traceroute packets are routed by means of
the routing table.
If the routing table is not used, traceroute packets are sent
only to hosts on the interface specified in the Interface box. If
the host is not on that interface, traceroute responses are not sent.
|
- To bypass the routing table and send the traceroute packets
to hosts on the specified interface only, select the check box.
- To route the traceroute packets by means of the routing
table, clear the check box.
|
|
Interface
|
Specifies the interface on which the traceroute packets are
sent.
|
From the list, select the interface on which traceroute packets
are sent. If you select any, the traceroute requests
are sent on all interfaces.
|
|
Time-to-Live
|
Specifies the maximum time-to-live (TTL) hop count for the traceroute
request packet.
|
From the list, select the TTL.
|
|
Type-of-Service
|
Specifies the type-of-service (TOS) value to include in the
IP header of the traceroute request packet.
|
From the list, select the decimal value of the TOS field.
|
|
Resolve AS Numbers
|
Determines whether the autonomous system (AS) number of each
intermediate hop between the device and the destination host
is displayed.
|
- To display the AS numbers, select the check box.
- To suppress the display of the AS numbers, clear the check
box.
|
