[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
CLI Configuration
- user@host# set security nat destination pool dpool-1
routing-instance ri-1
- user@host# set security nat destination pool dpool-1
address 2.2.2.10
- user@host# set security nat destination pool dpool-2
routing-instance ri-1
- user@host# set security nat destination pool dpool-2
address 2.2.2.20
- user@host# set security nat destination pool dpool-3
routing-instance ri-1
- user@host# set security nat destination pool dpool-3
address 2.2.2.30
- user@host# set security nat destination rule-set rs2
from routing-instance ri-1
- user@host# set security nat destination rule-set rs2
rule r1 match destination-address 1.1.1.1
- user@host# set security nat destination rule-set rs2
rule r1 then destination-nat pool dpool-1
- user@host# set security nat destination rule-set rs3
from zone Z2
- user@host# set security nat destination rule-set rs3
rule r2 match destination-address 1.1.1.1
- user@host# set security nat destination rule-set rs3
rule r2 then destination-nat pool dpool–2
- user@host# set security nat destination rule-set rs4
from interface fe-0/0/0.0
- user@host# set security nat destination rule-set rs4
rule r3 match destination-address 1.1.1.1
- user@host# set security nat destination rule-set rs4
rule r3 then destination-nat pool dpool-3
[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]