Example: Configuring Destination NAT on SRX-series Services Gateways

JUNOS software with enhanced services allows you to define NAT rules to translate the destination address from one IP address to another.

In this example, you perform the following tasks:

• Define a destination NAT rule for traffic from routing-instance ri-1 to address 1.1.1.1. Translate the destination IP address to 2.2.2.10.
• Define a destination NAT rule for traffic from zone Z2 to address 1.1.1.1. Translate the destination IP address to 2.2.2.20.
• Define a destination NAT rule for traffic from interface fe-0/0/0.0 to address 1.1.1.1. Translate the destination IP address to 2.2.2.30.