See the following sections:
- count
count-value ;
- [edit security idp custom-attack attack-name time-binding]
Statement introduced in Release 9.3 of JUNOS software.
Specify the number of times that IDP detects the attack within the specified scope before triggering an event.
This statement is supported on SRX-series devices.
count-value —Number of times IDP detects the attack.
For configuration instructions and examples, see the JUNOS Software Security Configuration Guide.
security—To view this statement in the configuration.
security-control—To add this statement to the configuration.
- count {
-
- alarm {
- per-minute-threshold number
| per-second-threshold number ;
- }
- }
- [edit security policies
from-zone zone-name to-zone zone-name policy policy-name then]
Statement introduced in Release 8.5 of JUNOS software.
Enables a count, in bytes or kilobytes, of all network traffic the security policy allows to pass through the device.
This statement is supported on J-series and SRX-series devices.
per-minute-threshold number —Alarm threshold in kilobytes per minute.
per-second-threshold number —Alarm threshold in bytes per second.
For configuration instructions and examples, see the JUNOS Software Security Configuration Guide.
security—To view this statement in the configuration.
security-control—To add this statement to the configuration.