See the following sections:
- mode packet-based;
- [edit security forwarding-options
family]
Statement modified in Release 8.5 of JUNOS software.
Enable packet forwarding for the selected protocol family. By default, the device drops traffic for the protocol family.
This statement is supported on J-series and SRX-series devices.
packet-based— Perform simple packet forwarding.
For configuration instructions and examples, see the JUNOS Software Interfaces and Routing Configuration Guide.
security—To view this statement in the configuration.
security-control—To add this statement to the configuration.
- mode (aggressive | main);
- [edit security ike policy policy-name ]
Statement introduced in Release 8.5 of JUNOS software.
Define the mode used for Internet Key Exchange (IKE) Phase 1 negotiations. Use aggressive mode only when you need to initiate an IKE key exchange without ID protection, as when a peer unit has a dynamically assigned IP address.
This statement is supported on J-series and SRX-series devices.
For configuration instructions and examples, see the JUNOS Software Security Configuration Guide.
security—To view this statement in the configuration.
security-control—To add this statement to the configuration.