[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

show security firewall-authentication history address

Syntax



         
show security firewall-authentication history address      
              ip-address     
          

         
<node (                    node-id                   | all | local | primary)>

Release Information

Command introduced in Release 8.5 of JUNOS software; node options added in Release 9.0 of JUNOS software.

Description

Display security firewall authentication history for this source IP address.

This command is supported on J-series and SRX-series devices.

Options

address ip-address —IP address of the authentication source.

none—Display all firewall authentication history for this address.

node—(Optional) For chassis cluster configurations, display firewall authentication history for this address on a specific node.

node-id —Identification number of the node. It can be 0 or 1.
all—Display information about all nodes.
local—Display information about the local node.
primary—Display information about the primary node.

Required Privilege Level

view

List of Sample Output

show security firewall-authentication history address 4.4.4.2
show security firewall-authentication history address 100.0.0.1 node local

Output Fields

Table 32 lists the output fields for the show security firewall-authentication history address command. Output fields are listed in the approximate order in which they appear.

Table 32: show security firewall-authentication history address Output Fields

Field Name	Field Description
Username	User ID.
Source IP	IP address of the authentication source.
Authentication state	Status of authentication (success or failure).
Authentication method	Path chosen for authentication.
Access start date	Date when user authenticated.
Access start time	Time when user authenticated.
Duration of user access	Time duration of the accessing firewall.
Policy name	Name of the policy.
Source zone	User traffic received from the zone.
Destination zone	User traffic destined to the zone.
Access profile	Name of profile used for authentication.
Bytes sent by this user	Number of bytes sent by the user.
Bytes received by this user	Number of bytes received by the user.

show security firewall-authentication history address 4.4.4.2

user@host> show
security firewall-authentication history address 4.4.4.2

Username: u1
Source IP: 4.4.4.2
Authentication state: Success 
Authentication method: Pass-through using HTTP
Access start date: 2007-09-12
Access start time: 15:33:29
Duration of user access: 0:00:48
Policy name: Z1-Z2
Source zone: Z1
Destination zone: Z2
Access profile: profile-local
Bytes sent by this user: 0
Bytes received by this user: 449

show security firewall-authentication history address 100.0.0.1 node local

user@host> show
security firewall-authentication history address 100.0.0.1 node local

node0:
--------------------------------------------------------------------------
Username: local1
Source IP: 100.0.0.1
Authentication state: Success 
Authentication method: Pass-through using Telnet
Access start date: 2008-01-04
Access start time: 12:00:10
Duration of user access: 0:05:49
Policy name: POL1
Source zone: z1
Destination zone: z2
Access profile: p1
Bytes sent by this user: 0
Bytes received by this user: 0
Username: local1
Source IP: 100.0.0.1
Authentication state: Success 
Authentication method: Pass-through using Telnet
Access start date: 2008-01-04
Access start time: 14:36:52
Duration of user access: 0:01:03
Policy name: POL1
Source zone: z1
Destination zone: z2
Access profile: p1
Bytes sent by this user: 2178
Bytes received by this user: 4172