[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
show security idp status
Syntax
- show security idp status
Release Information
Command introduced in Release 9.2 of
JUNOS software.
Description
Display the status of the current IDP
policy.
This command is
supported on SRX-series devices.
Required Privilege Level
view
List of Sample Output
show security idp status
Output Fields
Table 65 lists the output fields for the show security idp
status command. Output fields are listed in the approximate order
in which they appear.
Table 65: show security idp status Output Fields
|
Field Name
|
Field Description
|
|
Status of IDP
|
Status of current IDP policy.
|
|
Packets/second
|
The aggregated throughput (packets per second) for
the system.
|
|
KBits/second
|
The aggregated throughput (kbits per second) for
the system.
|
|
Latency
|
- min—Minimum delay for a packet to receive and
return by a node in microseconds.
- max—Maximum delay for a packet to receive and
return by a node in microseconds.
- ave—Average delay for a packet to receive and
return by a node in microseconds.
|
|
Current policy
|
Name of the current installed policy.
|
show security idp status
user@host> show
security idp status
Status of IDP: s0, Up since: 2008-03-31 16:33:22 PDT (12:47:45 ago)
Packets/second: 0 Peak: 12 @ 2008-03-31 18:45:39 PDT
KBits/second : 0 Peak: 6 @ 2008-03-31 18:45:39 PDT
Latency (microseconds): [min: 0] [max: 0] [ave: 0]
Current policy: viking-policy v0
[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]