Configuring Static Routes in J-Web

You can use the J-Web interface to configure static routes.

To configure static routes:

Select Configure>Routing > Static Routing. The Static Routing page displays details of the configured routes.
Click one:
- Add—To configure a route. Enter information into the routing page, as described in Table 147.
- Edit—To modify an existing route. Enter information into the routing page, as described in Table 147.
- Delete—To delete an existing route.

Table 147: Static Routing Configuration Summary

Field	Function	Your Action
Default Route
Default Route	Specifies the default gateway for the switch.	To specify an IPv4 address: Select IPv4. Type an IP address—for example, 10.10.10.10. Enter the subnet mask or address prefix. For example, 24 bits represents 255.255.255.0. To specify an IPv6 address: Select IPv6. Type an IP address—for example, 2001:ab8:85a3::8a2e:370:7334. Enter the subnet mask or address prefix.
Static Routes
Nexthop	Specifies the next-hop address or addresses to be used when routing traffic to the static route.	To add an address: Click Add. In the IP address dialog, enter the IP address. Note: If a route has multiple next-hop addresses, traffic is routed across each address in round-robin fashion. Click OK. To delete a next hop address, select it from the list and click Delete.