jnxRedAlarms

The jnxRedAlarms, whose object identifier is {jnxCraftAlarms 3}, contains the objects listed in Table 28.

Table 28: jnxRedAlarms

Object	Object ID	Description
jnxRedAlarmState	jnxRedAlarms 1	Denotes the state of red alarms on the craft interface panel of the router chassis. This object contains one of the following values: 1–other: The red alarm state is unknown. 2–off: The red alarm is turned off. 3–on: The red alarm is on. Typically, the red alarm is on when there is a system failure, power failure, or hardware malfunction, or when a threshold value is exceeded.
jnxRedAlarmCount	jnxRedAlarms 2	Shows the number of currently active and nonsilent red alarms. Note: The value of this object is independent of the state of the Alarm Cutoff/Lamp Test button.
jnxRedAlarmLastChange	jnxRedAlarms 3	Shows the value of the sysUp time when the red alarm last changed from on to off or vice versa. This object contains 0 value, if the alarm state has not changed since the sysUp time was reset last time, or if the value is unknown.

Object

Object ID

Description

jnxRedAlarmState

jnxRedAlarms 1

Denotes the state of red alarms on the craft interface panel of the router chassis. This object contains one of the following values:

1–other: The red alarm state is unknown.
2–off: The red alarm is turned off.
3–on: The red alarm is on. Typically, the red alarm is on when there is a system failure, power failure, or hardware malfunction, or when a threshold value is exceeded.

jnxRedAlarmCount

jnxRedAlarms 2

Shows the number of currently active and nonsilent red alarms.

Note: The value of this object is independent of the state of the Alarm Cutoff/Lamp Test button.

jnxRedAlarmLastChange

jnxRedAlarms 3

Shows the value of the sysUp time when the red alarm last changed from on to off or vice versa. This object contains 0 value, if the alarm state has not changed since the sysUp time was reset last time, or if the value is unknown.

jnxRedAlarms

Related Topics