IPsec Phase 2 IKE Tunnel Table
Table 97 identifies objects listed in the IPsec Phase 2 IKE Tunnel Table.
During this phase, IKE negotiates IPsec SA parameters and setup, matching IPsec SA in the peers.
Phase 2 VPN includes tunnel peer connection, associated with a specific policy or a tunnel interface. Phase 2 SA components include encryption and authentication algorithms, proxy-IDs, and optional DH group values.
Table 97: IPsec Phase 2 IKE Tunnel Table
Object | Object ID | Description |
|---|---|---|
Note: The jnxIpSecNumOfTunnels object is not supported in this release. | ||
jnxIpSecNumOfTunnels | jnxIpSecFlowMonPhaseTwo 1 | Number of IPsec VPN tunnels. This attribute should report the number of IPsec VPN tunnels in jnxIpSecTunnelTable. |
jnxIpSecTunnelMonTable | jnxIpSecFlowMonPhaseTwo 2 | The IPsec Phase 2 Tunnel Table. There is one entry in this table for each active IPsec Phase 2 tunnel. If the tunnel is terminated, then the entry is no longer available after the table has been refreshed. |
jnxIpSecTunnelMonEntry | jnxIpSecTunnelMonTable 1 | Each entry contains the attributes associated with an active IPsec Phase 2 tunnel. Sequence of attributes:
|
jnxIpSecTunMonRemoteGwAddrType | jnxIpSecTunnelMonEntry 1 | IP address type of remote gateway (endpoint) for the IPsec Phase 2 tunnel. |
jnxIpSecTunMonRemoteGwAddr | jnxIpSecTunnelMonEntry 2 | IP address of remote gateway (endpoint) for the IPsec Phase 2 tunnel. |
jnxIpSecTunMonIndex | jnxIpSecTunnelMonEntry 3 | Index number of IPsec Phase 2 Tunnel Table. The index number begins at 1 and is incremented with each tunnel that is created. The value of this object will wrap at 2,147,483,647. |
jnxIpSecTunMonLocalGwAddrType | jnxIpSecTunnelMonEntry 4 | IP address type of local gateway (endpoint) for the IPsec Phase 2 tunnel. |
jnxIpSecTunMonLocalGwAddr | jnxIpSecTunnelMonEntry 5 | IP address of local gateway (endpoint) for the IPsec Phase 2 tunnel. |
jnxIpSecTunMonLocalProxyId | jnxIpSecTunnelMonEntry 6 | Identifier for local end. |
jnxIpSecTunMonRemoteProxyId | jnxIpSecTunnelMonEntry 7 | Identifier for remote end. |
jnxIpSecTunMonKeyType | jnxIpSecTunnelMonEntry 8 | Type of key used by IPsec Phase 2 tunnel. It can be one of the following two types:
|
jnxIpSecTunMonRemotePeerType | jnxIpSecTunnelMonEntry 9 | Type of the remote peer gateway (endpoint). It can be one of the following two types:
|
jnxIpSecTunMonOutEncryptedBytes | jnxIpSecTunnelMonEntry 10 | Number of bytes encrypted by this Phase 2 tunnel. |
jnxIpSecTunMonOutEncryptedPkts | jnxIpSecTunnelMonEntry 11 | Number of packets encrypted by this Phase 2 tunnel. |
jnxIpSecTunMonInDecryptedBytes | jnxIpSecTunnelMonEntry 12 | Number of bytes decrypted by this Phase 2 tunnel. |
jnxIpSecTunMonInDecryptedPkts | jnxIpSecTunnelMonEntry 13 | Number of packets decrypted by this Phase 2 tunnel. |
jnxIpSecTunMonAHInBytes | jnxIpSecTunnelMonEntry 14 | Number of incoming bytes authenticated using AH by this Phase 2 tunnel. |
jnxIpSecTunMonAHInPkts | jnxIpSecTunnelMonEntry 15 | Number of incoming packets authenticated using AH by this Phase 2 tunnel. |
jnxIpSecTunMonAHOutBytes | jnxIpSecTunnelMonEntry 16 | Number of outgoing bytes applied AH by this Phase 2 tunnel. |
jnxIpSecTunMonAHOutPkts | jnxIpSecTunnelMonEntry 17 | Number of outgoing packets applied AH by this Phase 2 tunnel. |
jnxIpSecTunMonReplayDropPkts | jnxIpSecTunnelMonEntry 18 | Number of packets dropped by this Phase 2 tunnel due to antireplay check failure. |
jnxIpSecTunMonAhAuthFails | jnxIpSecTunnelMonEntry 19 | Number of packets received by this Phase 2 tunnel that failed AH authentication. |
jnxIpSecTunMonEspAuthFails | jnxIpSecTunnelMonEntry 20 | Number of packets received by this Phase 2 tunnel that failed ESP authentication. |
jnxIpSecTunMonDecryptFails | jnxIpSecTunnelMonEntry 21 | Number of packets received by this Phase 2 tunnel that failed decryption. |
jnxIpSecTunMonBadHeaders | jnxIpSecTunnelMonEntry 22 | Number of packets received by this Phase 2 tunnel that failed due to bad headers. |
jnxIpSecTunMonBadTrailers | jnxIpSecTunnelMonEntry 23 | Number of packets received by this Phase 2 tunnel that failed due to bad ESP trailers. |
Note: The jnxIpSecTunMonDroppedPkts object is not supported in this release. | ||
jnxIpSecTunMonDroppedPkts | jnxIpSecTunnelMonEntry 26 | Total number of dropped packets for this Phase 2 tunnel. |