To verify the SCCP configuration, perform these tasks:
Purpose
Display SCCP verification options.
Action
From the CLI, enter the show security alg sccp command.
user@host> show security alg sccp ?Possible completions: calls Show SCCP calls counters Show SCCP counters
What it Means
The output shows a list of all SCCP verification parameters. Verify the following information:
Purpose
Display a list of all SCCP calls
Action
From the CLI, enter the show security alg sccp calls command.
user@host> show security alg sccp calls Possible completions: calls Show SCCP calls counters Show SCCP counters endpoints Show SCCP endpoints
What it Means
The output shows a list of all SCCP verification parameters. Verify the following information:
Purpose
Display details about all SCCP calls.
Action
From the CLI, enter the show security alg sccp calls detail command.
user@host> show security alg sccp calls
detailClient IP address: 11.0.102.91
Client zone: 7
CallManager IP: 13.0.99.226
Conference ID: 16789504
Resource manager group: 2048
SCCP channel information:
Media transmit channel address (IP address/Port): 0.0.0.0:0
Media transmit channel translated address (IP address/Port): 0.0.0.0:0
Media transmit channel pass-through party ID (PPID): 0
Media transmit channel resource ID: 0
Media receive channel address (IP address/Port): 11.0.102.91:20060
Media receive channel translated address (IP address/Port): 25.0.0.1:1032
Media receive channel pass-through party ID (PPID): 16934451
Media receive channel resource ID: 8185
Multimedia transmit channel address (IP address/Port): 0.0.0.0:0
Multimedia transmit channel translated address (IP address/Port): 0.0.0.0:0
Multimedia transmit channel pass-through party ID (PPID): 0
Multimedia transmit channel resource ID: 0
Multimedia receive channel address (IP address/Port): 0.0.0.0:0
Multimedia receive channel translated address (IP address/Port): 0.0.0.0:0
Multimedia receive channel pass-through party ID (PPID): 0
Multimedia receive channel resource ID: 0
Total number of calls = 1
What it Means
The output shows a list of all SCCP verification parameters. Verify the following information:
Purpose
Display a list of all SCCP counters
Action
From the J-Web interface, select Monitor>ALGs > SCCP > Counters. Alternatively, from the CLI, enter the show security alg sccp counters command.
user@host> show security alg sccp ountersSCCP call statistics: Active client sessions : 0 Active calls : 0 Total calls : 0 Packets received : 0 PDUs processed : 0 Current call rate : 0 Error counters: Packets dropped : 0 Decode errors : 0 Protocol errors : 0 Address translation errors : 0 Policy lookup errors : 0 Unknown PDUs : 0 Maximum calls exceeded : 0 Maximum call rate exceeded : 0 Initialization errors : 0 Internal errors : 0 Nonspecific error : 0 No active calls to delete : 0 No active client sessions to delete : 0 Session cookie create errors : 0 Invalid NAT cookie detected : 0
What it Means
The output shows a list of all SCCP verification parameters. Verify the following information: