Multi-Rate Ethernet MACSEC MIC

Software release

Junos OS release 17.4R1 and later

For information about which MPCs support this MIC, see MIC/MPC Compatibility. For information about which MICs are supported on MX Series routers, see MICs Supported by MX Series Routers.

Description

• Weight: 3 lb (1.36 kg)

• Model number: MIC-MACSEC-MRATE

• Power requirement:

  110 W at 45° C

  105 W at 25° C

• Name in the CLI: MACSEC-12xQSFPP-XGE-XLGE-CGE

Hardware features

• Twelve Gigabit Ethernet QSFP+ ports, each of which can be configured as a 40-Gigabit Ethernet port or as four 10-Gigabit Ethernet ports (by using a breakout cable).

• The ports are numbered 0 through 11.

• Eight out of the twelve ports can be configured as 100-Gigabit Ethernet ports. Port numbers 0 through 3, and 6 through 9 are the eight 100-Gigabit Ethernet ports.

• When used in MP8CE:

  • Four ports out of the total twelve ports support 100-Gigabit Ethernet speed

  • Maximum aggregate port capacity across ports 0 through 5 should not exceed 240 Gbps

  • Maximum aggregate port capacity across ports 6 through 11 should not exceed 240 Gbps

• When used in MPC9E:

  • Eight ports out of the total twelve ports support 100-Gigabit Ethernet speed

  • Maximum aggregate port capacity across ports 0 through 5 should not exceed 400 Gbps

  • Maximum aggregate port capacity across ports 6 through 11 should not exceed 400 Gbp

• Table 1 lists the configurable Gigabit Ethernet port speeds for each port.

Software features

• Supports rate selectability at the port level.

• By default, the ports are configured as 10-Gigabit Ethernet ports.

• Supports remote port identification.

• Supports Media Access Control Security (MACsec). The following encryption algorithms are supported:

  • gcm-aes-128

  • gcm-aes-256

Cables and connectors

The list of supported transceivers for the MX Series is located at https://pathfinder.juniper.net/hct/category/#catKey=100001&modelType;=All&pf;=MX+Series.

LEDs

• OK/FAIL LED, one bicolor:

  • OFF—MIC is offline or MIC has fault.

  • Red—MIC is in power failure state.

  • Green—MIC is online.

• Link LED, one green per port:

  • Steady green—Link is up.

  • Off—Link is down or disabled.

• Like port status LED, each individual lane LED support four states as: OFF, AMBER, GREEN, RED. See MPC and MIC Lane LED Scheme Overview for more details.