close
keyboard_arrow_left
Table of Contents
- play_arrow Fast Track: Initial Installation
- play_arrow Overview
- play_arrow MX2020 System Overview and Architecture
- MX2020 Universal Edge Router Overview
- MX Series Router Architecture
- MX2020 Chassis Description
- MX2020 Backplane Description
- MX2020 Component Redundancy
- MX2020 Field-Replaceable Units
- MX Series Router Packet Forwarding Engine (PFE) Architecture
- Line Cards Supported on MX Series Routers
- Ethernet Frame Counts and Statistics on MX Series Routers
- MX2020 Router Hardware Components and CLI Terminology
- Understanding Trio Layer 2 Feature Parity
- play_arrow Alarm and Display Components
- play_arrow Cable and Rack Management
- play_arrow Cooling System Components and Descriptions
- play_arrow Host Subsystem Components
- MX2000 Host Subsystem CB-RE Description
- RE-MX2000-1800x4 CB-RE Description
- REMX2K-X8-64G and REMX2K-X8-64G-LT CB-RE Description
- CB-RE LEDs
- REMX2K-X8-128G CB-RE Description
- MX2000 Switch Fabric Board (SFB) Overview
- MX2000-SFB-S Switch Fabric Board Description
- MX2000-SFB2-S Enhanced Switch Fabric Board Description
- MX2000-SFB3 Switch Fabric Board Description
- play_arrow Interface Modules— ADCs, MPCs, and MICs
- MX Series Interface Module Reference
- MX2000 Modular Interface Card (MIC) Description
- MICs Supported by MX Series Routers
- MX2020 Modular Interface Card LEDs
- MX2020 Modular Port Concentrator (MPC) Description
- MPCs Supported by MX Series Routers
- MX2020 Modular Port Concentrator LEDs
- MX2000 Adapter Card (ADC) Description
- MPC Terminology
- MX2020 Port and Interface Numbering
- play_arrow Power Subsystem
- MX2020 Power Subsystem Description
- MX2020 Power Midplane Description
- MX2000 Three-Phase Delta AC Power Distribution Module Description
- MX2000 Three-Phase Wye AC Power Distribution Module Description
- MX2000 Seven-Feed Single-Phase AC Power Distribution Module Description
- MX2000 Nine-Feed Single-Phase AC Power Distribution Module Description
- MX2000 Three-Phase Delta and Wye AC Power Distribution Module LEDs
- MX2000 AC Power Supply Module Description
- MX2020 AC Power Supply Module LEDs
- MX2020 DC Power Distribution Module (-48 V) Description
- MX2000 DC Power Distribution Module (240 V China) Description
- MX2020 DC Power Distribution Module (-48 V) LEDs
- MX2000 DC Power Distribution Module (240 V China) LEDs
- MX2020 DC Power Supply Module (-48 V) Description
- MX2000 DC Power Supply Module (240 V China) Description
- MX2020 DC Power Supply Module LEDs
- MX2000 High-Voltage Universal (HVAC/HVDC) Power Distribution Module Description
- MX2000 High-Voltage Universal (HVAC/HVDC) Power Distribution Module LEDs
- MX2000 High-Voltage Universal (HVAC/HVDC) Power Supply Module Description
- MX2020 High-Voltage Universal Power Supply Module LEDs
-
- play_arrow Site Planning, Preparation, and Specifications
- play_arrow Planning and Preparing the Site
- Overview of Preparing the Site for the MX2020 Router
- MX2020 Site Preparation Checklist
- MX2020 Physical Specifications
- MX2020 Rack Requirements
- MX2020 Cabinet Size and Clearance Requirements
- Clearance Requirements for Airflow and Hardware Maintenance for the MX2020 Router
- MX2020 Cabinet Airflow Requirements
- MX2020 Router Environmental Specifications
- MX2000 Router Grounding Specifications
- MX2020 Chassis Moving Guidelines
- MX2020 Moving Requirements and Guidelines Using a Router Transport Kit
- Rack-Mounting Requirements
- play_arrow Transceiver and Cable Specifications
- play_arrow Pinout Specifications
- RJ-45 Connector Pinouts for MX Series CB-RE Auxiliary and Console Ports
- RJ-45 Connector Pinouts for an MX Series CB-RE or RCB Management Port
- Management Cable Specifications
- Console Port Connector Pinout Information
- RJ-45 to DB-9 Serial Port Adapter Pinout Information
- Mini-USB Port Pinout Specifications
- RJ-45 Management Port Connector Pinout Information
- RJ-45 Port, SFP Port, SFP+ Port, QSFP+ Port, and QSFP28 Port Connector Pinout Information
- play_arrow AC Power Requirements, Specifications, and Guidelines
- MX2020 AC Power Requirements
- MX2000 AC Power Cord Specifications
- MX2000 AC Power System Electrical Specifications
- MX2000 Router Grounding Specifications
- MX2000 Three-Phase Delta AC Power Distribution Module Electrical Specifications
- MX2000 Three-Phase Wye AC Power Distribution Module Electrical Specifications
- MX2000 Single-Phase AC Power Distribution Module Electrical Specifications
- Calculating AC Power Requirements for MX2020 Routers
- Mapping Input Power from AC Power Distribution Modules to AC Power Supply Modules on MX2000 Routers
- play_arrow DC Power Requirements, Specifications, and Guidelines
- MX2020 DC Power Requirements
- MX2020 DC Power Distribution Description
- MX2020 DC Power Distribution (240 V China) Description
- MX2000 Router DC (-48 V) Power Subsystem Electrical Specifications
- MX2000 Router DC (240 V China) Power Subsystem Electrical Specifications
- Determining DC Power Requirements for Your MX2020 Router
- DC Power (-48 V) Circuit Breaker Requirements for the MX2020 Router
- DC Power (240 V China) Circuit Breaker Requirements for the MX2000 Router
- DC Power Cable Specifications for the MX2020 Router
- play_arrow Universal (HVAC/HVDC) Power Requirements, Specifications, and Guidelines
- MX2020 High-Voltage Universal Power Requirements
- MX2000 High-Voltage Universal PDM (MX2K-PDM-HV) Power Cord Specifications
- MX2000 Router High-Voltage Universal (HVAC/HVDC) Power Subsystem Electrical Specifications
- Determining High-Voltage Universal Power Requirements for Your MX2020 Router
- High-Voltage Universal (HVAC/HVDC) Power Circuit Breaker Requirements for the MX2000 Router
-
- play_arrow Installing, Replacing, and Maintaining MX2020 Router Components
- play_arrow Required Tools and Parts
- play_arrow Installing, Removing, and Maintaining Power Components
- Replacing an MX2000 Three-Phase Delta AC Power Distribution Module
- Replacing an MX2020 Three-Phase Wye AC Power Distribution Module
- Removing an MX2000 Single-Phase AC Power Distribution Module
- Installing an MX2000 Single-Phase AC Power Distribution Module
- Replacing an MX2000 DC Power Distribution Module (-48 V)
- Replacing an MX2000 DC Power Distribution Module (240 V China)
- Replacing an MX2000 High-Voltage Universal (HVAC/HVDC) Power Distribution Module
- Replacing an MX2020 DC Power Supply Module (-48 V)
- Replacing an MX2000 DC Power Supply Module (240 V China)
- Replacing an MX2000 High-Voltage Second-Generation Universal (HVAC/HVDC) Power Supply Module
- Replacing an MX2000 AC Power Supply Module
- Maintaining the Power Supply Modules on the MX2000 Line of Routers
- Maintaining the MX2020 Power Usage
- Converting an MX2000 Router Between AC and DC Power
- play_arrow Installing, Removing, and Maintaining Cooling System Components
- Replacing an MX2020 Fan Tray
- Maintaining the MX2020 Fan Trays
- Removing the MX2020 Air Filter
- Installing an MX2020 Air Filter
- Maintaining the MX2020 Air Filter
- Maintaining the MX2020 Air Vents
- Removing the MX2020 Air Baffle
- Installing the MX2020 Air Baffle
- Maintaining the MX2020 Cooling System Components
- Maintaining the MX2020 Cooling System Zones
- play_arrow Installing, Removing, and Maintaining Host Subsystem Components
- Maintaining the MX2020 Host Subsystem
- Replacing an MX2000 SFB
- Maintaining the Switch Fabric Board (SFB)
- Replacing an MX2000 CB-RE
- Maintaining the MX2020 Control Boards
- Maintaining the MX2020 Routing Engines
- Upgrading to the Control Board-Routing Engine REMX2K-X8-64G in a Redundant Host Subsystem
- Upgrading to the REMX2K-X8-64G CB-RE in a Nonredundant Host Subsystem
- Maintaining the MX2020 Switch Processor Mezzanine Board (SPMB)
- Maintaining MX2020 Packet Forwarding Engine Components
- play_arrow Installing, Removing, and Maintaining Interface Modules— ADCs, MPCs, and MICs
- Holding an MPC
- Storing an MX2020 MPC
- Replacing an MX2020 MPC and Adapter Card (ADC)
- Maintaining MX2020 MPCs
- Maintaining MX2020 Adapter Cards
- Replacing an MX2020 MIC
- Maintaining MX2020 MICs
- Replacing an SFP or XFP Transceiver on an MX2020 MPC or MIC
- Installing an SFP or XFP into an MX2000 MPC or MIC
- Installing an MX2020 Dual-Wide MIC
- Install a Transceiver
- Remove a Transceiver
- Replacing a CFP2 Transceiver
- play_arrow Installing, Replacing, and Maintaining the Craft Interface
- play_arrow Installing, Removing, and Replacing EMI Covers
- play_arrow Installing, Replacing, and Maintaining Cables and Cable Managers
- Replacing a Cable on an MX2020 MPC or MIC
- Maintaining Cables That Connect to MX2020 MPCs or MICs
- Removing the MX2020 DC Cable Manager
- Installing the MX2020 DC Cable Manager
- Replacing the MX2020 Cable Managers
- Replacing the MX2020 Extended Cable Managers
- Removing the MX2020 Lower Cable Manager
- Installing the MX2020 Lower Cable Manager
- Removing the MX2020 Upper Cable Manager
- Installing the MX2020 Upper Cable Manager
- Replacing an MX2020 Three-Phase Delta AC Power Cord
- Replacing an MX2020 Three-Phase Wye AC Power Cord
- Replacing an MX2020 DC Power Distribution Module Cable
- Connect a Device to a Management Console Using an RJ‑45 Connector
- Connect a Fiber-Optic Cable
- Disconnect a Fiber-Optic Cable
- How to Handle Fiber-Optic Cables
- play_arrow Powering Off the Router
- play_arrow Maintaining the Chassis and Components
- Routine Maintenance Procedures for the MX2020 Router
- Taking an MX2000 Host Subsystem Offline
- Maintaining the MX2020 Chassis FRU Power On Sequence
- Maintaining and Verifying the Status of the MX2020 Router Components
- Maintaining the MX2020 Ethernet Switch
- Maintaining and Verifying the MX2020 Router Version
-
- play_arrow Troubleshooting Hardware
- play_arrow Contacting Customer Support and Returning the Chassis or Components
- play_arrow Contacting Customer Support
- play_arrow Locating Component Serial Numbers
- Displaying MX2020 Router Components and Serial Numbers
- MX2020 CB-RE Serial Number Label
- MX2020 Craft Interface Serial Number Label
- MX2020 Fan Tray Serial Number Label
- MX2020 MIC Serial Number Label
- MX2020 MPC Serial Number Label
- MX2020 Power Distribution Module Serial Number Label
- MX2020 Power Supply Module Serial Number Label
- MX2020 SFB Serial Number Label
- play_arrow Packing and Returning Components
-
- play_arrow Safety and Compliance Information
- play_arrow General Safety Guidelines and Warnings
- play_arrow Installation and Maintenance Safety Guidelines and Warnings
- play_arrow Radiation and Laser Warnings
- play_arrow Maintenance and Operational Safety Guidelines and Warnings
- play_arrow Electrical Safety Guidelines and Warnings
- General Electrical Safety Guidelines and Warnings
- Prevention of Electrostatic Discharge Damage
- AC Power Electrical Safety Guidelines
- AC Power Disconnection Warning
- DC Power Copper Conductors Warning
- DC Power Disconnection Warning
- DC Power Grounding Requirements and Warning
- DC Power Wiring Sequence Warning
- DC Power Wiring Terminations Warning
- Midplane Energy Hazard Warning
- Multiple Power Supplies Disconnection Warning
- Action to Take After an Electrical Accident
- play_arrow Agency Approvals and Compliance Statements
-
list Table of Contents
Tools Required to Install the MX2020 Router Using a Router Transport Kit
date_range
09-Mar-21
To install the router using a router transport kit, you need the following tools and equipment:
Router transport kit—MX2K-TRNSPRT-KIT
Front component shipping covers
Rear component shipping covers
Phillips (+) screwdrivers, numbers 1, 2, and 3
1/2-in. (12.7 mm) drive ratchet
1/4-in. (6.35 mm) torque-controlled driver or socket wrench to tighten the nuts on the router transport kit
1-1/8-in. (28.57 mm) torque-controlled driver or socket wrench to tighten router transport kit winch mechanism
9/16-in. or 14-mm open-end or socket wrench with extension to remove bracket bolts from the shipping pallet
Electrostatic discharge wrist strap
Antistatic mat
