- play_arrow Overview
- play_arrow Using Bundles to Create Logical Configurations for Physical Interfaces Overview
- play_arrow SAToP Bundle Overview
- SAToP Bundle Overview
- SAToP Interoperability with M Series E1/T1 Circuit Emulation PICs Overview
- Adaptive Clocking for SAToP Bundles Overview
- Determining Optimal Packet Size for SAToP Bundles Overview
- Providing QoS for SAToP Bundles by Using Service Type Overview
- Loss of Signal Detection Capability on CTP Bundles and SAToP Bundles
- Guidelines for Configuring LOS Detection
-
- play_arrow Troubleshooting
- play_arrow Knowledge Base
-
Configuring Virtual IP Parameters for SAToP Bundles (CTP Menu)
The virtual IP parameters allow you to use a separate IP address for each bundle and to use an address that is different from the IP address for the CTP device. If you configure the IP address on the:
Same subnet as the CTP IP address, you do not need a static route on the router.
Different subnet as the CTP IP address, you need a static route on the router.